Top

Tribology Letters

Published in:

01-12-2018 | Original Paper

Exploring Lubrication Function of MACs Greases for TC4 Alloy Under Sliding and Fretting Conditions

Authors: Xiaoqiang Fan, Hanmin Fu, Wen Li, Minhao Zhu

Published in: Tribology Letters | Issue 4/2018

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Lubrication function of multialkylated cyclopentanes (MACs) greases for the contact TC4/Steel was investigated in detail under the sliding and fretting conditions, and the worn tracks were measured by surface/interface analysis techniques to explore the friction mechanisms. The results demonstrate that these lubricating greases have good friction-reducing function under fretting and sliding conditions, and their friction reduction is superior to wear resistance, especially calcium sulfonate complex grease. Good lubrication function of MACs greases under sliding friction mainly depends on synergies of grease-film and friction-induced chemical reaction film. Fretting behaviors depend on not only grease-film and chemical reaction film, but also fretting wear mechanisms including abrasion, oxidation, and delamination.

previous article Nickel/Multi-walled Carbon Nanotube Nanocomposite Synthesized in Supercritical Fluid as Efficient Lubricant Additive for Mineral Oil

next article Dry Sliding Wear Behavior of Sn and NiSn Overlays on Cu Connectors

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Zhou, Y., Shen, M.X., Cai, Z.B., Peng, J.F., Zhu, M.H.: Study on dual rotary fretting wear behavior of Ti6Al4V titanium alloy. Wear 376, 670–679 (2017)CrossRef

Zhang, B.R., Cai, Z.B., Gan, X.Q., Zhu, M.H., Yu, H.Y.: Dual motion fretting wear behaviors of titanium and its alloy in artificial saliva. Trans. Nonferr. Met. Soc. 24, 100–107 (2014)CrossRef

Mo, J.L., Zhu, M.H., Zheng, J.F., Luo, J., Zhou, Z.R.: Study on rotational fretting wear of 7075 aluminum alloy. Tribol. Int. 43, 912–917 (2010)CrossRef

Long, M., Rack, H.J.: Titanium alloys in total joint replacement: a materials science perspective. Biomaterials 19, 1621–1639 (1998)CrossRef

Rack, H.J., Qazi, J.I.: Titanium alloys for biomedical applications. Mater. Sci. Eng. C. 26, 1269–1277 (2006)CrossRef

Yetim, A.F., Celik, A., Alsaran, A.: Improving tribological properties of Ti6Al4V alloy with duplex surface treatment. Surf. Coatings. Technol. 205, 320–324 (2010)CrossRef

Liu, X., Chu, P.K., Ding, C.: Surface modification of titanium, titanium alloys, and related materials for biomedical applications. Mater. Sci. Eng. R. 47, 49–121 (2004)CrossRef

Li, J.L., Sun, M.G., Ma, X.X.: Structural characterization of titanium oxide layers prepared by plasma based ion implantation with oxygen on Ti6Al4V alloy. Appl. Surf. Sci. 252, 7503–7508 (2006)CrossRef

Nie, X., Leyland, A., Matthews, A.: Deposition of layered bioceramic hydroxyapatite/TiO₂ coatings on titanium alloys using a hybrid technique of micro-arc oxidation and electrophoresis. Surf. Coatings. Technol. 125, 407–414 (2000)CrossRef

10.

Thorwarth, G., Hammerl, C., Kuhn, M., Assmann, W., Schey, B., Stritzker, B.: Investigation of DLC synthesized by plasma immersion ion implantation and deposition. Surf. Coatings. Technol. 193, 206–212 (2005)CrossRef

11.

Cassar, G., Banfield, S., Wilson, J.A., Housden, J., Matthews, A., Leyland, A.: Tribological properties of duplex plasma oxidised, nitrided and PVD coated Ti–6Al–4V. Surf. Coatings. Technol. 206, 395–404 (2011)CrossRef

12.

Cassar, G., Wilson, J.A., Banfield, S., Housden, J., Matthews, A., Leyland, A.: Surface modification of Ti–6Al–4V alloys using triode plasma oxidation treatments. Surf. Coatings Technol. 206, 4553–4561 (2012)CrossRef

13.

Sharma, M.D., Sehgal, R.: Experimental study of friction and wear characteristics of titanium alloy (Ti–6Al–4V) under lubricated sliding condition. Ind. Lubr. Tribol. 66, 174–183 (2014)CrossRef

14.

Wang, Y.M., Lei, T.Q., Guo, L.X., Jiang, B.L.: Fretting wear behaviour of microarc oxidation coatings formed on titanium alloy against steel in unlubrication and oil lubrication. Appl. Surf. Sci. 252, 8113–8120 (2006)CrossRef

15.

Yoshii, Y., Hattori, H.: Sliding friction characteristics of MACs grease under vacuum condition. Tribol. Online. 1, 14–18 (2006)CrossRef

16.

Peterangelo, S., Gschwender, L.J., Snyder, C.E., Jones, W.R., Nguyen, Q., Jansen, M.J.: Improved additives for multiply alkylated cyclopentane-based lubricants. J. Synth. Lubr. 20, 31–41 (2008)CrossRef

17.

Lugt, P.M.: A review on grease lubrication in rolling bearings. Tribol. T. 52, 470–480 (2009)CrossRef

18.

Lugt, P.M.: Modern advancements in lubricating grease technology. Tribo. Int. 97, 467–477 (2016)CrossRef

19.

Jones, W.R., Shogrin, B.A., Jansen, M.J.: Research on liquid lubricants for space mechanisms. J. Synth. Lubr. 17, 109–122 (2000)CrossRef

20.

Qi, J., Liu, H., Luo, Y., Zhang, D., Wang, Y.: Influences of added sand–dust particles on the tribological performance of graphite-like coating under solid–liquid lubrication. Tribol. Int. 71, 69–81 (2014)CrossRef

21.

Gschwender, L.J., Snyder, C.E., Massey, M., Peterangelo, S.: Improved liquid/grease lubricants for space mechanisms. Lubr. Eng. 56, 26–31 (1998)

22.

Leong, J.Y., Satyanarayana, N., Sinha, S.K.: A tribological study of multiply-alkylated cyclopentanes and perfluoropolyether lubricants for application to Si-MEMS devices. Tribol. Lett. 50, 195–206 (2013)CrossRef

23.

Fan, X.Q., Li, W., Li, H., Zhu, M.H., Xia, Y.Q., Wang, J.J.: Probing the effect of thickener on tribological properties of lubricating greases. Tribol. Int. 118, 128–139 (2018)CrossRef

24.

Zhuang, W.H., Fan, X.Q., Li, W., Li, H., Zhang, L., Peng, J.F., Cai, Z.B., Mo, J.L., Zhang, G.A., Zhu, M.H.: Comparing space adaptability of diamond-like carbon and molybdenum disulfide films toward synergistic lubrication. Carbon 134, 163–173 (2018)CrossRef

25.

Zhou, Z.R., Nakazaw, K., Zhu, M.H., Maruyama, N., Kapsa, P., Vincent, L.: Progress in fretting maps. Tribol. Int. 39, 1068–1073 (2006)CrossRef

26.

Vingsbo, O., Soderberg, S.: On fretting maps. Wear 126, 131–147 (1988)CrossRef

27.

Kalin, M.: Influence of flash temperatures on the tribological behaviour in lowspeed sliding: a review. Mater. Sci. Eng. A. 374, 390–397 (2004)CrossRef

28.

Zhang, P., Lu, W.L., Liu, X.J., Jiang, X.Q.: A comparative study on torsional fretting and torsional sliding wear of CuNiAl under different lubricated conditions. Tribol. Int. 117, 78–86 (2018)CrossRef

29.

Cui, G.J., Bi, Q.L., Zhu, S.Y., Yang, J., Liu, W.M.: Tribological behavior of Cu–6Sn–6Zn–3Pb under sea water, distilled water and dry–sliding conditions. Tribol. Int. 55, 126–134 (2012)CrossRef

30.

Jia, J.H., Chen, J.M., Zhou, H.D., Hu, L.T.: Comparative study on tribological behaviors of polyetheretherketone composite reinforced with carbon fiber and polytetrafluoroethylene under water-lubricated and dry-sliding against stainless steel. Tribol. Lett. 17, 231–238 (2004)CrossRef

31.

Fan, X.Q., Wang, L.P.: High-performance lubricant additives based on modified graphene oxide by ionic liquids. J. Colloid Interface Sci. 452, 98–108 (2015)CrossRef

32.

Yang, Y., Zhang, C.H., Wang, Y., Dai, Y.J., Luo, J.B.: Friction and wear performance of titanium alloy against tungsten carbide lubricated with phosphate ester. Tribol. Int. 95, 27–34 (2016)CrossRef

33.

Luo, Y., Ge, S.: Fretting wear behavior of nitrogen ion implanted titanium alloys in bovine serum lubrication. Tribol. Int. 42, 1373–1379 (2009)CrossRef

34.

Cai, M.R., Liang, Y.M., Zhou, F., Liu, W.M.: Tribological properties of novel imidazolium ionic liquids bearing benzotriazole group as the antiwear/anticorrosion additive in poly (ethylene glycol) and polyurea grease for steel/steel contacts. ACS. Appl. Mater. Interfaces. 3, 4580–4592 (2011)CrossRef

35.

Ji, X.B., Chen, Y.X., Zhao, G.Q., Wang, X.B., Liu, W.M.: Tribological properties of CaCO₃ nanoparticles as an additive in lithium grease. Tribol. Lett. 41, 113–119 (2010)CrossRef

36.

NIST X-ray Photoelectron Spectroscopy Database, National Institute of Standards and Technology: Gaithersburg. http://srdata.nist.gov/xps/

37.

Phillips, B.S., John, G., Zabinski, J.S.: Surface chemistry of fluorine containing ionic liquids on steel substrates at elevated temperature using Mössbauer spectroscopy. Tribol. Lett. 26, 85–91 (2007)CrossRef

38.

Sanders, J.H., Cutler, J.N., John, G.: Characterization of surface layers on M-50 steel exposed to perfluoropolyalkyethers at elevated temperatures. Appl. Surf. Sci. 135, 169–177 (1998)CrossRef

Title: Exploring Lubrication Function of MACs Greases for TC4 Alloy Under Sliding and Fretting Conditions
Authors: Xiaoqiang Fan
Hanmin Fu
Wen Li
Minhao Zhu
Publication date: 01-12-2018
Publisher: Springer US
Published in: Tribology Letters / Issue 4/2018
Print ISSN: 1023-8883
Electronic ISSN: 1573-2711
DOI: https://doi.org/10.1007/s11249-018-1091-1

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 4/2018

Use of FIB to Study ZDDP Tribofilms

A Tribological Study of γ-Fe2O3 Nanoparticles in Aqueous Suspension

Effect of Contamination on the Friction and Wear of Carboxylic Acids in Aqueous Lubricants

Impacts of Glyceride Additive on Tribological Properties of Water-Based Drilling Mud for Steel–Steel Contact

Effect of Counterparts and Applied Load on the Tribological Behavior of the Graphene–Nickel Matrix Self-Lubricating Composite

Effect of Steel Counterface on the Dry Sliding Behaviour of a Cu-Based Metal Matrix Composite

Premium Partners