Top

Arabian Journal for Science and Engineering

Published in:

09-10-2020 | Research Article-Chemistry

Fabrication and Characterization of UHMWPE–Ni Composites for Enhanced Electromagnetic Interference Shielding

Authors: G. Celebi Efe, I. Altinsoy, S. Ç. Yener, T. Yener, M. Ipek, C. Bindal, A. H. Ucisik

Published in: Arabian Journal for Science and Engineering | Issue 6/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Nickel-plated ultrahigh molecular weight polyethylene (UHMWPE) samples were prepared by an electroless coating method followed by hot pressing. The concentration of Ni in the composites was varied between 3.98 and 10.88 in volume percentage. XRD results revealed that Ni coating was successfully realized on the surface of UHWMPE particles confirmed by SEM–EDS. Ni thickness on the UHMWPE particles has thickness of 2 μm and there was also self-precipitated Ni plates as well as additive Ni particles according to SEM. Hardness values of Ni-coated UHMWPE–Ni composites increased 30% with increasing Ni content. The EMI-SE of the composite increased from 49 up to 70 dB by increasing Ni content for both X and Ku-band with respect to Ni concentration. Our samples, performed very high shielding within X band and also Ku band compared to most of other reports in the open literature, can be suitable for high-performance requirements especially in aerospace applications.

previous article In Vitro Biological Evaluation of Benzodioxol Derivatives as Antimicrobial and Antioxidant Agents

next article A Novel Approach to Synthesize Reduced Graphene Oxide (RGO) at Low Thermal Conditions

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Cerezci, O.: Görülmez-Duyulmaz Risk “Elektromagnetik Alan Kirliliği.” Nilufer Belediyesi (2017)

Mohan, R.R.; Varma, S.J.; Jayalekshmi, S.: Effective electromagnetic shield using conductive polyaniline films. Mater. Today Proc. (2019). https://doi.org/10.1016/j.matpr.2019.02.125CrossRef

Wang, J.; Ni, M.; Wu, F.; Liu, S.; Qin, J.; Zhu, R.: Electromagnetic radiation based continuous authentication in edge computing enabled internet of things. J. Syst. Archit. (2018). https://doi.org/10.1016/J.SYSARC.2018.12.003CrossRef

Morari, C.; Balan, I.; Pintea, J.; Chitanu, E.; Iordache, I.: Electrical conductivity and electromagnetic shielding effectiveness of silicone rubber filled with ferrite and graphite powders. Prog. Electromagn. Res. 21, 93–104 (2011)CrossRef

Wang, R.; Yang, H.; Wang, J.; Li, F.: The electromagnetic interference shielding of silicone rubber filled with nickel coated carbon fiber. Polym. Test. 38, 53–56 (2014). https://doi.org/10.1016/j.polymertesting.2014.06.008CrossRef

Singh, A.K.; Shishkin, A.; Koppel, T.; Gupta, N.: A review of porous lightweight composite materials for electromagnetic interference shielding. Compos. Part B Eng. 149, 188–197 (2018). https://doi.org/10.1016/j.compositesb.2018.05.027CrossRef

Lu, L.; Xie, Y.; Teh, K.S.; Tang, Y.; Wan, Z.; Xing, D.: Highly flexible and ultra-thin Ni-plated carbon–fabric/polycarbonate film for enhanced electromagnetic interference shielding. Carbon 132, 32–41 (2018). https://doi.org/10.1016/j.carbon.2018.02.001CrossRef

Wang, C.; Liu, Y.; Zhao, M.; Ye, F.; Cheng, L.: Three-dimensional graphene/SiBCN composites for high-performance electromagnetic interference shielding. Ceram. Int. 44, 22830–22839 (2018). https://doi.org/10.1016/j.ceramint.2018.09.074CrossRef

Xu, Y.; Yang, Y.; Yan, D.-X.; Duan, H.; Zhao, G.; Liu, Y.: Flexible and conductive polyurethane composites for electromagnetic shielding and printable circuit. Chem. Eng. J. 360, 1427–1436 (2019). https://doi.org/10.1016/j.cej.2018.10.235CrossRef

10.

Fujii, S.; Hamasaki, H.; Takeoka, H.; Tsuruoka, T.; Akamatsu, K.; Nakamura, Y.: Electroless nickel plating on polymer particles. J. Colloid Interface Sci. 430, 47–55 (2014). https://doi.org/10.1016/j.jcis.2014.05.041CrossRef

11.

Smirnova, M.N.; Tyurenkova, V.V.; Kosinov, S.N.; Nikitin, V.F.: High-frequency electromagnetic radiation affecting moving conductive screens. Acta Astronaut. (2019). https://doi.org/10.1016/j.actaastro.2019.03.004CrossRef

12.

Chen, L.F.: Microwave Electronics: Measurement and Materials Characterization. Wiley, New York (2004)CrossRef

13.

Schelkunoff, S.A.: Electromagnetic Waves. Hardcover, New York (1943)

14.

Schulz, R.B.; Plantz, V.C.; Brush, D.R.: Shielding theory and practice. IEEE Trans. Electromagn. Compat. 30, 187–201 (1988). https://doi.org/10.1109/15.3297CrossRef

15.

ASTM D4935-99: Standard Test Method for Measuring the Electromagnetic Shielding Effectiveness of Planar Materials (1999). https://doi.org/10.1520/D4935-99

16.

ASTM ES7-83: Test Method for Electromagnetic Shielding Effectiveness of Planar Materials. ASTM, New York (1983). https://doi.org/10.1520/ES7-83CrossRef

17.

IEEE Electromagnetic Compatibility Society. Standards Development Committee., Institute of Electrical and Electronics Engineers., IEEE-SA Standards Board., IEEE standard method for measuring the shielding effectiveness of enclosures and boxes having all dimensions between 0.1 and 2 m, pp 1–84. https://doi.org/10.1109/IEEESTD.2014.6712029

18.

USA Department of Defense: MIL-STD-285 Military Standard Attenuation Measurements for Enclosures Electromagnetic Shielding, for Electronic Test Purposes. Washington, DC (1956)

19.

Araz, İ.: The measurement of shielding effectiveness for small-in-size ferrite-based flat materials. Turk. J. Electr. Eng. Comput. Sci. 26, 2996–3006 (2018). https://doi.org/10.3906/elk-1803-162CrossRef

20.

Nicolson, A.M.: Broad-band microwave transmission characteristics from a single measurement of the transient response. IEEE Trans. Instrum. Meas. 17, 395–402 (1968). https://doi.org/10.1109/TIM.1968.4313741CrossRef

21.

Nicolson, A.M.; Ross, G.F.: Measurement of the intrinsic properties of materials by time-domain techniques. IEEE Trans. Instrum. Meas. 19, 377–382 (1970). https://doi.org/10.1109/TIM.1970.4313932CrossRef

22.

Weir, W.B.: Automatic measurement of complex dielectric constant and permeability at microwave frequencies. Proc. IEEE 62, 33–36 (1974). https://doi.org/10.1109/PROC.1974.9382CrossRef

23.

Holloway, C.L.; Hill, D.A.; Ladbury, J.; Koepke, G.; Garzia, R.: Shielding effectiveness measurements of materials using nested reverberation chambers. IEEE Trans. Electromagn. Compat. 45, 350–356 (2003). https://doi.org/10.1109/TEMC.2003.809117CrossRef

24.

Wilson, P.F.; Ma, M.T.; Adams, J.W.: Techniques for measuring the electromagnetic shielding effectiveness of materials. I. Far-field source simulation. IEEE Trans. Electromagn. Compat. 30, 239–250 (1988). https://doi.org/10.1109/15.3302CrossRef

25.

Liao, F.; Han, X.; Zhang, Y.; Xu, C.; Chen, H.: Carbon fabrics coated with nickel film through alkaline electroless plating technique. Mater. Lett. 205, 165–168 (2017). https://doi.org/10.1016/j.matlet.2017.06.087CrossRef

26.

Zhou, E.; Xi, J.; Guo, Y.; Liu, Y.; Xu, Z.; Peng, L.; Gao, W.; Ying, J.; Chen, Z.; Gao, C.: Synergistic effect of graphene and carbon nanotube for high-performance electromagnetic interference shielding films. Carbon 133, 316–322 (2018). https://doi.org/10.1016/J.CARBON.2018.03.023CrossRef

27.

Celebi Efe, G.; Altinsoy, I.; Türk, S.; Bindal, C.; Ucisik, A.H.: Effect of particle size on microstructural and mechanical properties of UHMWPE–TiO₂ composites produced by gelation and crystallization method. J. Appl. Polym. Sci. 136, 15–18 (2019). https://doi.org/10.1002/app.47402CrossRef

28.

Al-Saleh, M.H.: Influence of conductive network structure on the EMI shielding and electrical percolation of carbon nanotube/polymer nanocomposites. Synth. Met. 205, 78–84 (2015). https://doi.org/10.1016/j.synthmet.2015.03.032CrossRef

29.

Ecco, L.; Dul, S.; Schmitz, D.; Barra, G.; Soares, B.; Fambri, L.; Pegoretti, A.: Rapid prototyping of efficient electromagnetic interference shielding polymer composites via fused deposition modeling. Appl. Sci. 9, 37 (2018). https://doi.org/10.3390/app9010037CrossRef

30.

Li, Y.; Li, C.; Zhao, S.; Cui, J.; Zhang, G.; Gao, A.; Yan, Y.: Facile fabrication of highly conductive and robust three-dimensional graphene/silver nanowires bicontinuous skeletons for electromagnetic interference shielding silicone rubber nanocomposites. Compos. Part A 119, 101–110 (2019). https://doi.org/10.1016/j.compositesa.2019.01.025CrossRef

31.

Lyu, J.; Zhao, X.; Hou, X.; Zhang, Y.; Li, T.; Yan, Y.: Electromagnetic interference shielding based on a high strength polyaniline-aramid nanocomposite. Compos. Sci. Technol. 149, 159–165 (2017). https://doi.org/10.1016/j.compscitech.2017.06.026CrossRef

32.

Wen, B.; Wang, X.; Zhang, Y.: Ultrathin and anisotropic polyvinyl butyral/Ni–graphite/short-cut carbon fibre film with high electromagnetic shielding performance. Compos. Sci. Technol. 169, 127–134 (2018). https://doi.org/10.1016/j.compscitech.2018.11.013CrossRef

33.

Ji, X.; Chen, D.; Shen, J.; Guo, S.: Accepted manuscript flexible and flame-retarding thermoplastic polyurethane-based electromagnetic interference shielding composites. Chem. Eng. J. (2019). https://doi.org/10.1016/j.cej.2019.03.293CrossRef

34.

Jiyong, H.; Guohao, L.; Junhui, S.; Xudong, Y.; Xin, D.: Improving the electromagnetic shielding of nickel/polyaniline coated polytrimethylene-terephthalate knitted fabric by optimizing the electroless plating conditions. Text. Res. J. 87, 902–912 (2017). https://doi.org/10.1177/0040517516641361CrossRef

35.

Sheng, A.; Yang, Y.; Ren, W.; Duan, H.; Liu, B.; Zhao, G.; Liu, Y.: Ground tire rubber composites with hybrid conductive network for efficiency electromagnetic shielding and low reflection. J. Mater. Sci. Mater. Electron. 30, 14669–14678 (2019). https://doi.org/10.1007/s10854-019-01838-4CrossRef

Title: Fabrication and Characterization of UHMWPE–Ni Composites for Enhanced Electromagnetic Interference Shielding
Authors: G. Celebi Efe
I. Altinsoy
S. Ç. Yener
T. Yener
M. Ipek
C. Bindal
A. H. Ucisik
Publication date: 09-10-2020
Publisher: Springer Berlin Heidelberg
Published in: Arabian Journal for Science and Engineering / Issue 6/2021
Print ISSN: 2193-567X
Electronic ISSN: 2191-4281
DOI: https://doi.org/10.1007/s13369-020-04952-2

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 6/2021

Statistical Optimization of Parameters for Enhanced Bioactive Metabolites Produced by Streptomyces hygroscopicus AVS7

A Novel Approach to Synthesize Reduced Graphene Oxide (RGO) at Low Thermal Conditions

Impacts of a New Highway on Urban Development and Land Accessibility in Developing Countries: Case of Beirut Southern Entrance in Lebanon

Synthesis, Characterization, Biocomputational Modeling and Antibacterial Study of Novel Pyran Based on 8-Hydroxyquinoline

Study of Electron Dynamics Controlling the Threshold Intensity Dependence on the Gas Pressure in FIR Laser-Induced Breakdown of Molecular Oxygen: Effect of Loss Processes

Photocatalytic of Congo Red Decolorization in the Presence of Ag/AgCl/TiO2 Nanocomposite: Optimization of Process with Taguchi Method

Premium Partners