Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Journal of Polymer Research
Published in: Journal of Polymer Research 3/2020

01-03-2020 | Original Paper

Facile preparation PCL/ modified nano ZnO organic-inorganic composite and its application in antibacterial materials

Authors: Laijun Liu, Yu Zhang, Chaojing Li, Jiacheng Cao, Er He, Xiaotong Wu, Fujun Wang, Lu Wang

Published in: Journal of Polymer Research | Issue 3/2020

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Due to its good biodegradability and biocompatibility, polycaprolactone (PCL) has attracted widespread attention in the field of biomedical materials. Incorporation of Zinc oxide (ZnO) into PCL has been proved an effective way to improve its antibacterial properties. However, the interfacial compatibility of the organic-inorganic system needs to be improved due to the agglomeration of nanoparticles and phase separation of ZnO and PCL matrix affect its antibacterial efficiency. In this research, the ZnO surface was modified with citric acid monohydrate (CA) to improve the interfacial properties of ZnO-PCL system. The surface modification of ZnO was analyzed by DLS, TEM, TGA, and XPS. The results suggest that CA coating process can significantly reduce the agglomeration of ZnO nanoparticles and improve dispersion stability. The uniform PCL/ZnO-CA membranes with various nanofiller contents were fabricated through the solvent casting method. DSC and TGA analysis showed that the presence of ZnO-CA nanoparticles slightly decreased the crystallinity and thermal stability of the polymer. And ZnO-CA loaded improved the mechanical properties and wettability of the composite PCL membranes. Moreover, the composite PCL membranes showed good antibacterial activity against both E. coli and S. aureus while exhibiting good cytocompatibility, which indicated that the antibacterial and no cytotoxicity biomaterials had promising application in the biomedical field.
previous article Effect of thermal aging on crystallization behaviors and dynamic mechanical properties of glass fiber reinforced polyphenylene sulfide (PPS/GF) composites
next article The surface tunability and dye separation property of PVDF porous membranes modified by P(MMA-b-MEBIm-Br): effect of poly(ionic liquid) brush lengths

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Appendix
Available only for authorised users
Literature
1.
Woodruff MA, Hutmacher DW (2010) The return of a forgotten polymer-Polycaprolactone in the 21st century. Prog Polym Sci 35(10):1217–1256
2.
Wang Y, Cui W, Zhao X et al (2018) Bone remodeling-inspired dual delivery electrospun nanofibers for promoting bone regeneration. Nanoscale 11(1):60–71PubMed
3.
Sattary M, Khorasani MT, Rafienia M et al (2018) Incorporation of nanohydroxyapatite and vitamin D3 into electrospun PCL/gelatin scaffolds: the influence on the physical and chemical properties and cell behavior for bone tissue engineering. Polym Adv Technol 29(1):451–462
4.
Ding Y, Li W, Correia A et al (2018) Electrospun Polyhydroxybutyrate/poly(epsilon-caprolactone)/sol-gel-derived silica hybrid scaffolds with drug releasing function for bone tissue engineering applications. ACS Appl Mater Interfaces 10(17):14540–14548PubMedPubMedCentral
5.
Kim Y-J, Park MR, Kim MS et al (2012) Polyphenol-loaded polycaprolactone nanofibers for effective growth inhibition of human cancer cells. Mater Chem Phys 133(2–3):674–680
6.
Sakka S, Baroudi K, Nassani MZ (2012) Factors associated with early and late failure of dental implants. J Investig Clin Dent 3(4):258–261PubMed
7.
Schwartz-Arad D, Laviv A, Levin L (2008) Failure causes, timing, and cluster behavior: an 8-year study of dental implants. Implant Dent 17(2):200–203PubMed
8.
Lee C-H, Chung YS, Lee SH et al (2012) Analysis of the factors influencing bone graft infection after cranioplasty. J Trauma Acute Care Surg 73(1):255–260PubMed
9.
Aros-Calt S, Castelli FA, Lamourette P et al (2019) Metabolomic Investigation of Staphylococcus aureus Antibiotic Susceptibility by Liquid Chromatography Coupled to High-Resolution Mass Spectrometry. Methods Mol Biol 1871:279–293PubMed
10.
Tra Thanh N, Ho Hieu M, Tran Minh Phuong N et al (2018) Optimization and characterization of electrospun polycaprolactone coated with gelatin-silver nanoparticles for wound healing application. Mater Sci Eng C Mater Biol Appl 91:318–329PubMed
11.
Yi Z, Wei H, Jiehua L et al (2017) Gemini quaternary ammonium salt waterborne biodegradable polyurethanes with antibacterial and biocompatible properties. Mater Chem Front 1(2):361–368
12.
Leng M, Hu S, Lu A et al (2016) The anti-bacterial poly(caprolactone)-poly(quaternary ammonium salt) as drug delivery carriers. Appl Microbiol Biotechnol 100(7):3049–3059PubMed
13.
Lumbreras-Aguayo A, Melendez-Ortiz HI, Puente-Urbina B et al (2019) Poly(methacrylic acid)-modified medical cotton gauzes with antimicrobial and drug delivery properties for their use as wound dressings. Carbohydr Polym 205:203–210PubMed
14.
Sokmen M, Tatlidil I, Breen C et al (2011) A new nano-TiO2 immobilized biodegradable polymer with self-cleaning properties. J Hazard Mater 187(1–3):199–205PubMed
15.
Prabhawathi V, Sivakumar PM, Boobalan T et al (2019) Design of antimicrobial polycaprolactam nanocomposite by immobilizing subtilisin conjugated Au/Ag core-shell nanoparticles for biomedical applications. Mater Sci Eng C Mater Biol Appl 94:656–665PubMed
16.
Chen P, Wu Z, Leung A et al (2018) Fabrication of a silver nanoparticle-coated collagen membrane with anti-bacterial and anti-inflammatory activities for guided bone regeneration. Biomed Mater 13(6):065014PubMed
17.
Fernandez-Calderon MC, Cifuentes SC, Pacha-Olivenza MA et al (2017) Antibacterial effect of novel biodegradable and bioresorbable PLDA/Mg composites. Biomed Mater 12(1):015025PubMed
18.
Tong WY, Bin Abdullah AYK, Rozman NASB et al (2018) Antimicrobial wound dressing film utilizing cellulose nanocrystal as drug delivery system for curcumin. Cellulose 25(1):631–638
19.
Nair S, Sasidharan A, Rani VVD et al (2009) Role of size scale of ZnO nanoparticles and microparticles on toxicity toward bacteria and osteoblast cancer cells. J Mater Sci Mater Med 20:235–241
20.
Ye JY, Huang ZY, Min C et al (2009) Structure and haemocompatibility of ZnO films deposited by radio frequency sputtering. Biomed Mater 4(5):055004PubMed
21.
Perez Espitia PJ, Ferreira Soares NDF, Dos Reis Coimbra JS et al (2012) Zinc oxide nanoparticles: synthesis, antimicrobial activity and food packaging applications. Food Bioprocess Technol 5(5):1447–1464
22.
Felice B, Sanchez MA, Socci MC et al (2018) Controlled degradability of PCL-ZnO nanofibrous scaffolds for bone tissue engineering and their antibacterial activity. Mater Sci Eng C Mater Biol Appl 93:724–738PubMed
23.
Leal AI, Caridade SG, Ma J et al (2013) Asymmetric PDLLA membranes containing bioglass (R) for guided tissue regeneration: characterization and in vitro biological behavior. Dent Mater 29(4):427–436PubMed
24.
DING Y, Li W, Muller T et al (2016) Electrospun Polyhydroxybutyrate/poly(epsilon-caprolactone)/58S sol-gel bioactive glass hybrid scaffolds with highly improved Osteogenic potential for bone tissue engineering. ACS Appl Mater Interfaces 8(27):17098–17108PubMed
25.
Zhang Z, Tang J, Wang H et al (2015) Controlled antibiotics release system through simple blended electrospun fibers for sustained antibacterial effects. ACS Appl Mater Interfaces 7(48):26400–26404PubMed
26.
Zou J, Jiang X, Zhang J et al. Preparation and Characterization of Surface-modified B-tricalcium Phosphate/Ploy (L-lactide) Biocomposites, New and Advanced Materials, Pts 1 and 2, 2011: 120–126
27.
Jiang L, Xiong C, Chen D et al (2012) Effect of n-HA with different surface-modified on the properties of n-HA/PLGA composite. Appl Surf Sci 259:72–78
28.
Sadlo A, Peeters D, Albert R et al (2019) Investigating zinc Ketoiminates as a new class of precursors for solution deposition of ZnO thin films. J Nanosci Nanotechnol 19(2):867–876PubMed
29.
Stevens JS, Byard SJ, Schroeder SLM (2010) Characterization of proton transfer in co-crystals by X-ray photoelectron spectroscopy (XPS). Cryst Growth Des 10(3):1435–1442
30.
Ribut SH, Abdullah CAC, Mustafa M et al (2019) Influence of pH variations on zinc oxide nanoparticles and their antibacterial activity. Mater Res Expr 6(2):E015016
31.
Mallakpour S, Javadpour M (2018) Comprehensive study on reinforcement of poly(vinyl chloride) nanocomposite films with ZnO nanoparticles modified by citric acid and vitamin C. Int J Polym Anal Charact 23(5):415–429
32.
Liao J-G, Zhang L, Zuo Y et al (2009) Surface modification of Nano-hydroxyapatite with stearic acid. Chinese J Inorg Chem 25(7):1267–1273
33.
Messali M, Alwadaani F, Oudghiri-Hassani H et al (2014) Preparation, characterization and photocatalytic activity of hexagonal ZnO nanoparticles. Mater Lett 128:187–190
34.
Ding Y, Roether JA, Boccaccini AR et al (2014) Fabrication of electrospun poly (3-hydroxybutyrate)/poly (epsilon-caprolactone)/silica hybrid fibermats with and without calcium addition. Eur Polym J 55:222–234
35.
Mallakpour S, Nouruzi N (2017) Effects of citric acid-functionalized ZnO nanoparticles on the structural, mechanical, thermal and optical properties of polycaprolactone nanocomposite films. Mater Chem Phys 197:129–137
36.
Jiang Y, Mao K, Cai X et al (2011) Poly(ethyl glycol) assisting water sorption enhancement of poly(epsilon-caprolactone) blend for drug delivery. J Appl Polym Sci 122(4):2309–2316
37.
Abdolmaleki A, Mallakpour S, Borandeh S (2014) Tailored functionalization of ZnO nanoparticle via reactive cyclodextrin and its bionanocomposite synthesis. Carbohydr Polym 103:32–37PubMed
38.
Min BM, Jeong L, Nam YS et al (2004) Formation of silk fibroin matrices with different texture and its cellular response to normal human keratinocytes. Int J Biol Macromol 34(5):281–288PubMed
39.
Yu W, Lan C-H, Wang S-J et al (2010) Influence of zinc oxide nanoparticles on the crystallization behavior of electrospun poly(3-hydroxybutyrate-co-3-hydroxyvalerate) nanofibers. Polymer 51(11):2403–2409
40.
Vishnu Chandar J, Shanmugan S, Murugan P et al (2016) Structural analysis of ZnO nanoparticles reinforced P(3HB-co-15 Mol% 3HHx) bioplastic composite. J Polym Environ 25(4):1251–1261
41.
Pires LSO, Fernandes MHFV, De Oliveira JMM (2018) Crystallization kinetics of PCL and PCL–glass composites for additive manufacturing. J Therm Anal Calorim 134(3):2115–2125
42.
Celebi H, Bayram G, Dogan A (2013) Effect of ZnO type and concentration on the mophology, thermal, and mechanical properties of poly(ether ester)/ZnO composites. J Appl Polym Sci 129(6):3417–3424
43.
Samad UA, Alam MA, Chafidz A et al (2018) Enhancing mechanical properties of epoxy/polyaniline coating with addition of ZnO nanoparticles: Nanoindentation characterization. Prog Org Coat 119:109–115
44.
Mallakpour S, Nouruzi N (2016) Modification of morphological, mechanical, optical and thermal properties in polycaprolactone-based nanocomposites by the incorporation of diacid-modified ZnO nanoparticles. J Mater Sci 51(13):6400–6410
45.
Mu S, Wu D, Qi S et al (2011) Preparation of Polyimide/Zinc Oxide Nanocomposite Films via an Ion-Exchange Technique and Their Photoluminescence Properties. J Nanomater
46.
Ramier J, Bouderlique T, Stoilova O et al (2014) Biocomposite scaffolds based on electrospun poly(3-hydroxybutyrate) nanofibers and electrosprayed hydroxyapatite nanoparticles for bone tissue engineering applications. Mater Sci Eng C Mater Biol Appl 38:161–169PubMed
47.
Augustine R, Malik HN, Singhal DK et al (2014) Electrospun polycaprolactone/ZnO nanocomposite membranes as biomaterials with antibacterial and cell adhesion properties. J Polym Res 21(3)
48.
Lim CT, Tan EPS, Ng SY (2008) Effects of crystalline morphology on the tensile properties of electrospun polymer nanofibers. Appl Phys Lett 92(14)
49.
Yeo M, Lee H, Kim G (2011) Three-dimensional hierarchical composite scaffolds consisting of Polycaprolactone, beta-Tricalcium phosphate, and collagen Nanofibers: fabrication, physical properties, and in vitro cell activity for bone tissue regeneration. Biomacromolecules 12(2):502–510PubMed
50.
Venugopal J, Low S, Choon AT et al (2008) Electrospun-modified nanofibrous scaffolds for the mineralization of osteoblast cells. J Biomed Mater Res A 85A(2):408–417
51.
Si J, Cui Z, Wang Q et al (2016) Biomimetic composite scaffolds based on mineralization of hydroxyapatite on electrospun poly(epsilon-caprolactone)/nanocellulose fibers. Carbohydr Polym 143:270–278PubMed
52.
Song W, Mano JF (2013) Interactions between cells or proteins and surfaces exhibiting extreme wettabilities. Soft Matter 9(11):2985
53.
Gong M, Chi C, Ye J et al (2018) Icariin-loaded electrospun PCL/gelatin nanofiber membrane as potential artificial periosteum. Colloids Surf B: Biointerfaces 170:201–209PubMed
54.
Liu Y, Shen X, Zhou H et al (2016) Chemical modification of chitosan film via surface grafting of citric acid molecular to promote the biomineralization. Appl Surf Sci 370:270–278
55.
Patil PP, Bohara RA, Meshram JV et al (2019) Hybrid chitosan-ZnO nanoparticles coated with a sonochemical technique on silk fibroin-PVA composite film: A synergistic antibacterial activity. Int J Biol Macromol 122:1305–1312PubMed
56.
Sirelkhatim A, Mahmud S, Seeni A et al (2015) Review on zinc oxide nanoparticles: antibacterial activity and toxicity mechanism. Nano Micro Lett 7(3):219–242
Metadata
Title
Facile preparation PCL/ modified nano ZnO organic-inorganic composite and its application in antibacterial materials
Authors
Laijun Liu
Yu Zhang
Chaojing Li
Jiacheng Cao
Er He
Xiaotong Wu
Fujun Wang
Lu Wang
Publication date
01-03-2020
Publisher
Springer Netherlands
Published in
Journal of Polymer Research / Issue 3/2020
Print ISSN: 1022-9760
Electronic ISSN: 1572-8935
DOI
https://doi.org/10.1007/s10965-020-02046-z

Other articles of this Issue 3/2020

Journal of Polymer Research 3/2020 Go to the issue

ORIGINAL PAPER

A statistical approach to investigate the effects of multicomponent fractions on the mechanical properties of PP/PPMA/Talc/POE composites

Original Paper

Effect of thermal aging on crystallization behaviors and dynamic mechanical properties of glass fiber reinforced polyphenylene sulfide (PPS/GF) composites

ORIGINAL PAPER

The surface tunability and dye separation property of PVDF porous membranes modified by P(MMA-b-MEBIm-Br): effect of poly(ionic liquid) brush lengths

ORIGINAL PAPER

Synthesis and characterization of novel polyurethane elastomers that include curcumin with various cross-linked structures

ORIGINAL PAPER

Polypyrrole inter-layered low temperature curing benzoxazine matrices with enhanced thermal and dielectric properties

ORIGINAL PAPER

Incorporation of UiO-66-NH2 into modified PAN nanofibers to enhance adsorption capacity and selectivity for oil removal

Premium Partners

    Image Credits