Top

Published in:

2021 | OriginalPaper | Chapter

Flywheel Energy Application in Commercial and Agricultural Field: A Typical Review

Authors : Sagar D. Shelare, Ravinder Kumar, Pravin B. Khope

Published in: Recent Trends in Engineering Design

Publisher: Springer Singapore

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Storing energy has an imperative responsibility in modern years. A flywheel is a mechanical device that can be considered as more established energy storage equipment that is reliable and it has various advantages. In a flywheel-based machine, a flywheel stores mechanical energy more explicitly rotational energy. A flywheel used into the machinery fills in as a repository which spares energy when the energy supply is additional than need and releases when a requisite is greater than supply. This paper presents the review of storage devices for mechanical, specifically the flywheel. The different constructional details and materials for flywheel are clarified in this investigation. The different advances in the flywheel along the particular application of flywheel in the commercial as well as the agriculture field are discussed. Flywheel discovered satisfactory to overcome the various shortage because of electricity.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Parametric Optimization of Hole Quality in Laser Drilling Kevlar/Basalt Hybrid FRP Composite

next chapter Cyclostationary Analysis-Based Gearbox Fault Diagnosis Under Varying Speed

Mousavi GSM, Nikdel M (2014) Various battery models for various simulation studies and applications. Renew Sustain Energy Rev 32:477–485. https://doi.org/10.1016/j.rser.2014.01.048

Li G (2015) Energy and exergy performance assessments for latent heat thermal energy storage systems. Renew Sustain Energy Rev 51:926–954. https://doi.org/10.1016/j.rser.2015.06.052CrossRef

Satkin M, Noorollahi Y, Abbaspour M, Yousefi H (2014) Multi criteria site selection model for wind-compressed air energy storage power plants in Iran. Renew Sustain Energy Rev 32:579–590. https://doi.org/10.1016/j.rser.2014.01.054CrossRef

Bitterly JG (1998) Flywheel technology: past, present and 21th century projections. IEEE AES Syst Manag 13(8):13–16CrossRef

Strzelecki R, Benysek G (2008) Power electronics in smart electrical energy networks. Springer Press, London

https://mechanical-design-handbook.blogspot.com/2007/12/flywheels.html. Accessed: 30 July 2020

Kyu Ha S, Kim DJ, Sung TH (2001) Optimum design of multi-ring composite flywheel rotor using a modified generalized plane strain assumption. Int J Mech Sci 43(4):993–1007. https://doi.org/10.1016/S0020-7403(00)00047-3

Ha SK, Han HH, Han YH (2008) Design and manufacture of a composite flywheel press-fit multi-rim rotor. J Reinf Plast Compos 27(9):953–965. https://doi.org/10.1177/0731684407086625CrossRef

Van Rensburg J, Petrus J, Groenwold AA, Wood DW (2013) Optimization of cylindrical composite flywheel rotors for energy storage. Struct Multidiscip Optim 47(1):135–147CrossRef

10.

Ha SK, Kim MH, Han SC, Sung TH (2006) Design and spin test of a hybrid composite flywheel rotor with a split type hub. J Compos Mater 40(23):2113–2130. https://doi.org/10.1177/0021998306061324CrossRef

11.

Kim SJ, Hayat K, Nasir SU, Sung KH (2014) Design and fabrication of hybrid composite hubs for a multi-rim flywheel energy storage system. Compos Struct 107(1):19–29. https://doi.org/10.1016/j.compstruct.2013.07.032CrossRef

12.

Bakholdin D, Bosley RW, Rosen HA (1996) Flywheel rotor with conical hub and methods of manufacture therefore. U.S. Patent 5,566,588, issue 1, pp 1–5

13.

Hayat K, Kim SJ, Lee YH, Kwon JD, Kim KT, Hockney D, Arseneaux J, Jung SY, Ha SK (2011) Design, fabrication and testing of a hybrid composite flywheel rotor and hub. In: ICCM international conferences on composite materials, pp 1–6

14.

Jian L, Chau KT, Yu Gong JZ, Jiang CY, Li W (2009) Comparison of coaxial magnetic gears with different topologies. IEEE Trans Magn 45(10):4526–4529. https://doi.org/10.1109/TMAG.2009.2021662CrossRef

15.

Bleuler H (2009) Magnetic bearings: theory, design, and application to rotating machinery. Springer Science and Business Media

16.

Strasik M, Hull JR, Mittleider JA, Gonder JF, Johnson PE, McCrary KE, McIver CR (2010) An overview of boeing flywheel energy storage systems with high-temperature superconducting bearings. Superconductor Sci Technol 23(3). https://doi.org/10.1088/0953-2048/23/3/034021

17.

Zakiuddin KS, Singh MP, Modak JP (2019) Mathematical modeling and simulation of chaff cutter energized by human powered flywheel motar. In: Uhl T (ed) Advances in mechanism and machine science. In: IFToMM WC 2019. Mechanisms and machine science, vol 73. Springer, Cham. https://doi.org/10.1007/978-3-030-20131-9_350

18.

Sanket W, Bawiskar HS, Singh R, Dhumal S, Kardile C (2019) Design of flour kneading machine by using human powered flywheel motor (HPFM). Trends Mach Des 6(1):19–24. https://doi.org/10.37591/tmd.v6i1.2635

19.

Khope PB (2013) Establishing empirical relationship to predict the chaff cutting phenomenon energized by human powered flywheel motor (Hpfm). IOSR J Agric Veterin Sci 3(2):35–39. https://doi.org/10.9790/2380-0323539CrossRef

20.

Shelare SD, Kumar R, Khope PB (2021) Formulation of a mathematical model for quantity of deshelled nut in charoli nut deshelling machine. In: Prakash C, Krolczyk G, Singh S, Pramanik A (eds) Advances in metrology and measurement of engineering surfaces. Lecture notes in mechanical engineering. Springer, Singapore

21.

Khope PB, Modak JP (2013) Development and performance evaluation of a human powered flywheel motor operated forge cutter. Int J Sci Technol Res 2(3):146–149

22.

Dhande HK, Shelare SD, Khope PB (2020) Developing a mixed solar drier for improved postharvest handling of food grains. Agric Eng Int CIGR J 22(4):17–27

23.

Ramawat RB, Khope PB, Choudhary PS (2014) Design and performance evaluation of pedal operated ice-cream making machine. Int J Eng Res Technol 3(2278–0181):1780–1783

24.

Ghuge VD, Modak JP (2014) Experimental data based model for time to exhaust flywheel energy in a human powered flywheel motor driven system having a novel gearbox. Int J Res Eng Adv Technol 1(6):1–5

25.

Bhatkulkar HS, Modak JP (2014) Design and development of nursery fertilizer mixer energized by human powered flywheel motor. Int J Res Emerg Sci Technol 1(5):69–73

26.

Dhale AD, Modak JP (2012) Formulation of experimental data based model for oil press using human powered flywheel motor as energy source. Agric Eng Int CIGR J 14(3):218–229

27.

Sheikh SM, Zakiuddin KS (2019) History of human powered oil expeller: a literature review. In: Zhang B, Ceccarelli M (eds) Explorations in the history and heritage of machines and mechanisms. History of mechanism and machine science, vol 37. Springer, Cham. https://doi.org/10.1007/978-3-030-03538-9_7

28.

Undirwade SK, Singh MP, Sakhale CN (2015) Experimental investigation of processing time, number of slivers and resistive torque required for human powered bamboo sliver cutting operation. J Bamboo Rattan 14(1–4):33–51

29.

Jawalekar SB, Shelare SD (2020) Development and performance analysis of low cost combined harvester for rabi crops. Agric Eng Int CIGR J 22(1):197–201

30.

Undirwade SK (2018) Development and optimization of experimental data based models for bamboo sliver cutting by using human powered flywheel motor. Int J Mech Prod Eng Res Dev (IJMPERD) 8(1):1007–1020. https://doi.org/10.24247/ijmperdfeb2018121

31.

Waghmare SN, Sakhale CN, Tembhurkar CK, Shelare SD (2020) Assessment of average resistive torque for human-powered stirrup making process. In: Iyer B, Deshpande P, Sharma S, Shiurkar U (eds) Computing in engineering and technology. Advances in intelligent systems and computing, vol 1025. Springer, Singapore

32.

Waghmare SN, Shelare SD, Tembhurkar CK, Jawalekar SB (2021) Development of a model for the number of bends during stirrup making process. In: Prakash C, Krolczyk G, Singh S, Pramanik A (eds) Advances in metrology and measurement of engineering surfaces. Lecture notes in mechanical engineering. Springer, Singapore

33.

Sonawane RA, Waybhase JR, Yengupatla RB, Shumail S (2017) Design and development of sugar cane sprout cutter machine by human powered flywheel motor concept. Int Res J Eng Technol (IRJET) 4(1):119–124

34.

Moghe SM, Zakiuddin KS (2013) Design and development of turmeric polishing machine energized by human power flywheel motor—a past review. In: 1st international and 16th national conference on machines and mechanisms, INaCoMM, pp 920–923

35.

Ganorkar AP, Zakiuddin KS, Hussain HA (2012) Development of pedal operated water pump. J Jpn Soc Pediatric Surg 5(2):359. https://doi.org/10.11164/jjsps.5.2_359_3

36.

Sonde VM, Shirpurkar PP, Giripunje MS, Ashtankar PP (2021) Experimental and dimensional analysis approach for human energy required in wood chipping process. In: Hassanien A, Bhatnagar R, Darwish A (eds) Advanced machine learning technologies and applications. AMLTA 2020. Advances in intelligent systems and computing, vol 1141. Springer, Singapore. https://doi.org/10.1007/978-981-15-3383-9_61

Title: Flywheel Energy Application in Commercial and Agricultural Field: A Typical Review
Authors: Sagar D. Shelare
Ravinder Kumar
Pravin B. Khope
Publisher: Springer Singapore
Book: Recent Trends in Engineering Design
Print ISBN: 978-981-16-1078-3

Electronic ISBN: 978-981-16-1079-0

Copyright Year: 2021
DOI: https://doi.org/10.1007/978-981-16-1079-0_19

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partners