Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Physics of Metals and Metallography
Published in: Physics of Metals and Metallography 4/2019

01-04-2019 | STRUCTURE, PHASE TRANSFORMATIONS, AND DIFFUSION

Formation of Structure of an Annealed High-Speed Steel upon Laser Surface Melting

Authors: A. S. Chaus, A. V. Maksimenko, N. N. Fedosenko, Ĺ. Čaplovič, V. N. Myshkovets

Published in: Physics of Metals and Metallography | Issue 4/2019

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The effect of the time and energy parameters of pulsed laser treatment on the structure formation and hardness of high-speed steel after annealing upon surface melting has been studied. The results of the metallographic analysis and energy-dispersive X-ray microanalysis of the steel, as well as of the microhardness measurements, have been discussed. It has been shown that the laser-induced remelting of the annealed high-speed steel causes a significant refinement of both the solid solution and of the carbide constituent. The structure of the laser-affected zone and the morphology of dendrites depend on the laser-irradiation regimes.
previous article Influence of Neutron and Electron Irradiation on Structural-Phase Transformations in Fe–12Cr–2W–V–Ta–B Steel Processed under Various Heat Treatment Conditions
next article Prediction of the Phase Composition of High-Entropy Аlloys Based on Cr–Nb–Ti–V–Zr Using the Calphad Method

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
K. Bobzin, “High-performance coatings for cutting tools,” CIRP J. Manuf. Sci. Technol. 18, 1–9 (2017).CrossRef
2.
F. D. Gelin and A. S. Chaus, Metallic Materials (Vysheishaya shkola, Minsk, 2007) [in Russian].
3.
V. P. Astakhov, “Tribology of cutting tools,” in Tribology in Manufacturing Technology, Ed. by P. J. Davim (Springer, New York, 2013), pp. 1–66.
4.
S.-H. Chang, T.-C. Tang, K.-T. Huang, and C.‑M. Liu, “Investigation of the characteristics of DLC films on oxynitriding-treated ASP23 high speed steel by DC-pulsed PECVD process,” Surf. Coat. Technol. 261, 331–336 (2015).CrossRef
5.
M. Gowri, W. J. P. Enckevort, J. J. Schermer, J. P. Celis, J. J. Meulen, and J. G. Buijnsters, “Growth and adhesion of hot filament chemical vapor deposited diamond coatings on surface modified high speed steel,” Diam. Relat. Mater. 18, 1450–1458 (2009).CrossRef
6.
R. Polini, Mantini F. Pighetti, M. Braic, M. Amar, W. Ahmed, and H. Taylor, “Effects of Ti- and Zr-based interlayer coatings on the hot filament chemical vapour deposition of diamond on high speed steel,” Thin Solid Films 494, 116–122 (2006).CrossRef
7.
L. Schäfer, M. Fryda, T. Stolley, L. Xiang, and C.‑P. Klages, “Chemical vapour deposition of polycrystalline diamond films on high-speed steel,” Surf. Coat. Technol. 116–119, 447–451 (1999).CrossRef
8.
W. Wu, W. Chen, S. Yang, Y. Lin, S. Zhang, T-Y. Cho, G. H. Lee, and S-Ch. Kwon, “Design of AlCrSiN multilayers and nanocomposite coating for HSS cutting tools,” Appl. Surf. Sci. 351, 803–810 (2015).CrossRef
9.
I. S. Cho, A. Amanov, and J. D. Kim, “The effects of AlCrN coating, surface modification and their combination on the tribological properties of high speed steel under dry conditions,” Tribol. Int. 81, 61–72 (2015).CrossRef
10.
D. Kottfer, M. Ferdinandy, L. Kaczmarek, I. Maňková, and J. Beňo, “Investigation of Ti and Cr based PVD coatings deposited onto HSS Co 5 twist drills,” Appl. Surf. Sci. 282, 770–776 (2013).CrossRef
11.
J. Gerth and U. Wiklund, “The influence of metallic interlayers on the adhesion of PVD TiN coatings on high-speed steel,” Wear 264, 885–892 (2008).CrossRef
12.
A. S. Chaus, P. Pokorný, L’ Čaplovič, M. V. Sitkevich, and J. Peterka, “Complex fine-scale diffusion coating formed at low temperature on high-speed steel substrate,” Appl. Surf. Sci. 437, 257–270 (2018).CrossRef
13.
M. G. Krukovich, B. A. Prusakov, and I. G. Sizov, Plasticity of Boronized Layers, in Springer Series in Materials Science, Vol. 237 (Springer, 2016).
14.
B. Edenhofer, D. Joritz, M. Rink, and K. Voges, “Carburizing of steels,” in Thermochemical Surface Engineering of Steels, Ed. by E. J. Mittemeijer and M. A. J. Somers (Woodhead Publishing, 2015).
15.
E. D. Doyle, A. M. Pagon, P. Hubbard, S. J. Dowey, A. Pilkington, and D. G. McCulloch, “Nitriding of high speed steel,” Int. Heat Treat. Surf. Eng. 5, 69–72 (2011).CrossRef
16.
A. S. Chaus, M. Murgas, I. V. Latyshev, and R. Toth, “Heat treatment of cast carburising high-speed steel alloyed with Ti, Nb and V,” Met. Sci. Heat Treat. 43, 220–223 (2001).CrossRef
17.
Yu. A. Geller, Instrumental Steels (5th Ed.) (Metallurgiya, Moscow, 1983) [in Russian].
18.
N. Hashemi, A. Mertens, H.-M. Montrieux, J. T. Tchuindjang, O. Dedry, R. Carrus, and J. Lecomte-Beckers, “Oxidative wear behaviour of laser clad high speed steel thick deposits: Influence of sliding speed, carbide type and morphology,” Surf. Coat. Technol. 315, 519–529 (2017).CrossRef
19.
G. F. Sun, K. Wang, R. Zhou, A. X. Feng, and W. Zhang, “Effect of different heat-treatment temperatures on the laser clad M3:2 high-speed steel,” Mater. Des. 65, 606–616 (2015).CrossRef
20.
P. A. Ogin, D. L. Merson, L. A. Kondrashina, and K. Ya. Vas’kin, “The influence of laser modification modes on the structure, properties, and wear resistance of small-sized high-speed R6M5 steel tools,” Vektor Nauki TGU, No. 4, 83–88 (2015).
21.
L. E. Afanas’eva, I. A. Barabonova, E. V. Botyanov, G. V. Ratkevich, and R. M. Grechishkin, “Structural phase transitions in high-speed steel upon laser quenching with surface melting treatment using a multichannel CO2 laser,” Uprochn. Tekhnol. Pokryt. No. 8, 10–13 (2013).
22.
P. Jurči, J. Cejp, and J. Brajer, “Metallurgical aspects of laser surface processing of PM Cr–V ledeburitic steel,” Adv. Mater. Sci. Eng. 2011, 1–8 (2011).
23.
J. Arias, M. Cabeza, G. Castro, I. Feijoo, P. Merino, and G. Pena, “Microstructural characterization of laser surface melted AISI M2 tool steel,” J. Microsc. 239, 184–193 (2010).CrossRef
24.
K. Y. Benyounis, O. M. Fakron, and J. H. Abboud, “Rapid solidification of M2 high-speed steel by laser melting,” Mater. Des. 30, 674–678 (2009).CrossRef
25.
W. Darmawan, J. Quesada, and R. Marchal, “Characteristics of laser melted AISI-T1 high speed steel and its wear resistance,” Surf. Eng. 23, 112–119 (2007).CrossRef
26.
R. Colaço, E. Gordo, E. M. Ruiz-Navas, M. Otasevic, and R. Vilar, “A comparative study of the wear behaviour of sintered and laser surface melted AISI M42 high speed steel diluted with iron,” Wear 260, 949–956 (2006).CrossRef
27.
S. Kąc and J. Kusiński, “SEM and TEM microstructural investigation of high-speed tool steel after laser melting,” Mater. Chem. Phys. 81, 510–512 (2003).CrossRef
28.
G. H. Shehata, A. M. A. Moussa, and P. Molian, “A Nd:YAG laser alloying of high-speed steel tools with BN and Ti/BN and the effects on turning performance,” Wear 179, 199–210 (1993).CrossRef
29.
A. G. Grigor’yants, Fundamentals of Laser Treatment of Materials (Mashinostroenie, Moscow, 1989) [in Russian].
30.
C. Soriano, J. Leunda, J. Lambarri, Navas V. Garcia, and C. Sanz, “Effect of laser surface hardening on the microstructure, hardness and residual stresses of austempered ductile iron grades,” Appl. Surf. Sci. 257, 7101–7106 (2011).CrossRef
31.
J. Sander, J. Hufenbach, L. Giebeler, H. Wendrock, U. Kühn, and J. Eckert, “Microstructure and properties of FeCrMoVC tool steel produced by selective laser melting,” Mater. Des. 89, 335–341 (2016).CrossRef
32.
Z. H. Liu, D. Q. Zhang, C. K. Chua, and K. F. Leong, “Crystal structure analysis of M2 high speed steel parts produced by selective laser melting,” Mater. Charact. 84, 72–80 (2013).CrossRef
33.
A. S. Chaus, A. V. Maksimenko, N. N. Fedosenko, Ĺ. Čaplovič, and V. N. Myshkovets, “Formation of structure of a high-speed steel upon laser surface melting,” Phys. Met. Metallogr. 120, 269–277 (2019).
34.
A. S. Chaus, “Structural and phase changes in carbides of the high-speed steel upon heat treatment,” Phys. Met. Metallogr. 117, 684–692 (2016).CrossRef
35.
C. T. Kwok, K. H. Lo, F. T. Cheng, and H. C. Man, “Effect of processing conditions on the corrosion performance of laser surface-melted AISI 440C martensitic stainless steel,” Surf. Coat. Technol. 166, 221–230 (2003).CrossRef
36.
R. Colaço and R. Vilar, “Stabilisation of retained austenite in laser surface melted tool steels,” Mater. Sci. Eng., A 385, 123–127 (2004).CrossRef
Metadata
Title
Formation of Structure of an Annealed High-Speed Steel upon Laser Surface Melting
Authors
A. S. Chaus
A. V. Maksimenko
N. N. Fedosenko
Ĺ. Čaplovič
V. N. Myshkovets
Publication date
01-04-2019
Publisher
Pleiades Publishing
Published in
Physics of Metals and Metallography / Issue 4/2019
Print ISSN: 0031-918X
Electronic ISSN: 1555-6190
DOI
https://doi.org/10.1134/S0031918X19040033

Other articles of this Issue 4/2019

Physics of Metals and Metallography 4/2019 Go to the issue

ELECTRICAL AND MAGNETIC PROPERTIES

Frequency Dependence of Microwave Giant Magnetoresistive Effect in the Magnetic Metallic Nanostructures

STRENGTH AND PLASTICITY

Effect of Thermomechanical Treatment on the Formation of Gradient Structure and Mechanical Properties in a Disk Made of Powder-Metallurgy Nickel-Based Superalloy

STRUCTURE, PHASE TRANSFORMATIONS, AND DIFFUSION

Metallographic Investigation of Structural Changes upon Collapse of Cylindrical Copper Shells

STRENGTH AND PLASTICITY

Constitutive Equation for the Hot Deformation Behavior of TiNiNb Shape Memory Alloy

ELECTRICAL AND MAGNETIC PROPERTIES

Neutron Diffraction Studies of the Transformation of Magnetic and Domain Structures upon Spin-Reorientation Transition in the Tm2Fe18 Ferrimagnet

ELECTRICAL AND MAGNETIC PROPERTIES

Hyperfine Magnetic Fields at the Nuclei of 57Fe in the Intermetallic System Zr1 –xScxFe2