Top

Published in:

2021 | OriginalPaper | Chapter

Future Trends and Technologies in Additive and Substractive Manufacturing

Authors : Vineet Kumar, Bhargav Reddy Isanaka, Sristi Gupta, Vinod Kushvaha

Published in: Additive and Subtractive Manufacturing of Composites

Publisher: Springer Singapore

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Additive Manufacturing (AM) enables the manufacture of three-dimensional components and products out of raw materials and three-dimensional design data. AM is also known as 3D printing is a set of emerging technologies that can be seen as a future of manufacturing. The ability of additive manufacturing in manufacturing complex products makes it more popular. Nowadays, many companies like aerospace, automotive, and healthcare industries are moving towards additive manufacturing for assembling their products. Many researches are being conducted in additive manufacturing to increase its efficiency. This chapter is a comprehensive study on future trends and technologies in additive manufacturing. Also, shows a comparison between additive manufacturing and subtractive manufacturing on different grounds. The article highlights the techniques that are currently being used in additive manufacturing and its future trends. The techniques include photopolymer, deposition, lamination, powder-based, etc. The trends in a number of papers published in additive manufacturing are shown. Both local and overseas research activities on additive manufacturing have been focusing on new processes, new materials, new software capabilities, and new applications of the emerging additive manufacturing technology. The article also includes predictions on the market value of additive manufacturing in its different sectors like hardware, software, materials, post-processing, etc.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Applications of Additive Manufacturing

Akinsowon V (2020) The additive manufacturing landscape 2020 [Report]. https://amfg.ai/whitepapers/the-additive-manufacturing-landscape-2020-report/

Bhargav A, Sanjairaj V, Vinicius Rosa Lu, Feng W, Jerry Fuh Yh (2018) Applications of additive manufacturing in dentistry: a review. J Biomed Mater Res B Appl Biomater 106(5):2058–2064. https://doi.org/10.1002/jbm.b.33961CrossRefPubMed

Bhattacharjya J, Tripathi S, Taylor A, Taylor M, Walters D (2014) Additive manufacturing: current status and future prospects. In: Working conference on virtual enterprises. Springer, pp 365–372

Blum H (2015) The future of 3D printing to 2025. Smithers Pira. http://www.smitherspira.com/news/2015/june/3d-print-market-expected-to-reach-%2449b-by-2025

Bourell DL, Leu MC, Rosen DW (2009) Roadmap for additive manufacturing: identifying the future of freeform processing. The University of Texas at Austin, Austin, TX, pp 11–15

Bourell DL, Beaman JJ (2004) Methodologies and processes. Additive/subtractive manufacturing techniques in Europe. https://apps.dtic.mil/sti/pdfs/ADA466756.pdf

Bynum DK (1992). Apparatus for forming a three-dimensional reproduction of an object from laminations. United States US5127037A, filed August 15, 1990, and issued June 30, 1992. https://patents.google.com/patent/US5127037A/en

Castrejon-Pita JR, Baxter WRS, Morgan J, Temple S, Martin GD, Hutchings IM (2013) Future, opportunities and challenges of inkjet technologies. Atom Sprays 23(6)

Cosmos Research (2019) Additive manufacturing market 2019–2025. Size & forecast. Research Cosmos. https://www.researchcosmos.com/reports/additive-manufacturing-market/1170635782

10.

Credi C, Fiorese A, Tironi M, Bernasconi R, Magagnin L, Levi M, Turri S (2016) 3D printing of cantilever-type microstructures by stereolithography of ferromagnetic photopolymers. ACS Appl Mater Interfaces 8(39):26332–26342CrossRef

11.

Derby B (2015) additive manufacture of ceramics components by inkjet printing. Engineering 1(1):113–123CrossRef

12.

Domingues J, Marques T, Mateus A, Carreira P, Malça C (2017) An additive manufacturing solution to produce big green parts from tires and recycled plastics. Procedia Manuf 12:242–248CrossRef

13.

Donath S (2019) Water jet cutter. https://www.etmm-online.com/water-jet-cutting--function-methods-and-application-examples-a-834966/

14.

Dudek P, Zagórski K (2017) Cost, resources, and energy efficiency of additive manufacturing. In: E3S web of conferences Jan 14, p 01040. https://doi.org/10.1051/e3sconf/20171401040

15.

Exner Hv, Horn M, Streek A, Ullmann F, Hartwig L, Regenfuß P, Ebert R (2008) Laser micro sintering: a new method to generate metal and ceramic parts of high resolution with sub-micrometer powder. Virtual Phys Prototyping 3(1):3–11CrossRef

16.

Formlabs (2018). Additive versus subtractive manufacturing. Formlabs. https://formlabs.com/blog/additive-manufacturing-vs-subtractive-manufacturing/

17.

Gowda Y, Vinod A, Madhu P, Kushvaha V, Sanjay MR, Siengchin S (2021) A new study on flax-basalt-carbon fiber reinforced epoxy/bio-epoxy hybrid composites. Polym Compos. https://doi.org/10.1002/pc.25944

18.

Gupta MK, Song Q, Liu Z, Sarikaya M, Jamil M, Mia M, Kushvaha V, Singla AK, Li Z (2020) Ecological, economical and technological perspectives based sustainability assessment in hybrid-cooling assisted machining of Ti–6Al–4V alloy. Sustain Mater Technol 26(December):e00218. https://doi.org/10.1016/j.susmat.2020.e00218

19.

Haleem A, Javaid M (2020) 3D printed medical parts with different materials using additive manufacturing. Clin Epidemiol Glob Health 8(1):215–223. https://doi.org/10.1016/j.cegh.2019.08.002CrossRef

20.

Hull CW, Spence ST, Albert DJ, Smalley DR, Harlow RA, Steinbaugh P, Tarnoff HL, Nguyen HD, Lewis CW, Vorgitch TJ (1991) Methods and apparatus for production of three-dimensional objects by stereolithography. issued 22 October 1991

21.

Kasperovich G, Hausmann J (2015) Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting. J Mater Process Technol 220:202–214CrossRef

22.

Kellens K, Yasa E, Dewulf W, Duflou J (2010) Environmental assessment of selective laser melting and selective laser sintering. In: Going green-care innovation: from legal compliance to energy-efficient products and services, Paper, no 2, pp 14–15

23.

Kelly P (2017) Young people and the coming of the third industrial revolution. Routledge handbook of youth and young adulthood, pp 391–399

24.

Kruth J-P, Leu M-C, Nakagawa T (1998) Progress in additive manufacturing and rapid prototyping. CIRP Ann Manuf Technol 47(2):525–540CrossRef

25.

Krycer G (2020) Opportunities in additive manufacturing software markets 2020. SmarTech Analysis. https://www.smartechanalysis.com/reports/opportunities-in-additive-manufacturing-software-markets-2020/

26.

Kushvaha V, Anand Kumar S, Madhushri P, Sharma A (2020) Artificial neural network technique to predict dynamic fracture of particulate composite. J Compos Mater 54(22):3099–3108. https://doi.org/10.1177/0021998320911418CrossRef

27.

Kushvaha V, Branch A, Tippur H (2014) Effect of loading rate on dynamic fracture behavior of glass and carbon fiber modified epoxy. In: Song B, Casem D, Kimberley J (eds) Dynamic behavior of materials, vol 1. Conference proceedings of the society for experimental mechanics series. Springer, Cham, pp 169–76. https://doi.org/10.1007/978-3-319-00771-7_21

28.

Leuders S, Thöne M, Andre Riemer T, Niendorf TT, Richard HA, Maier HJ (2013) On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: fatigue resistance and crack growth performance. Int J Fatigue 48:300–307

29.

Li J, Wu B, Myant C (2016) The current landscape for additive manufacturing research. https://www.semanticscholar.org/paper/The-Current-Landscape-for-Additive-Manufacturing-Li-Wu/454eddc4e2e2707550bef3398e2dae42cc83620f#paper-header

30.

McGeehin C (2019) Additive manufacturing with metal powders 2019. SmarTech Analysis. https://www.smartechanalysis.com/reports/additive-manufacturing-with-metal-powders-2019/

31.

Melchels FPW, Feijen J, Grijpma DW (2010) A review on stereolithography and its applications in biomedical engineering. Biomaterials 31(24):6121–6130. https://doi.org/10.1016/j.biomaterials.2010.04.050CrossRefPubMed

32.

Moreau C (2019) The state of 3d printing report: 2019 by Sculpteo. https://www.sculpteo.com/media/ebook/State_of_3DP_2018.pdf

33.

Murr LE, Gaytan SM, Ramirez DA, Martinez E, Hernandez J, Amato KN, Shindo PW, Medina FR, Wicker RB (2012) Metal fabrication by additive manufacturing using laser and electron beam melting technologies. J Mater Sci Technol 28(1):1–14CrossRef

34.

Nelson JC, Xue S, Barlow JW, Beaman JJ, Marcus HL, Bourell DL (1993) Model of the selective laser sintering of bisphenol—A polycarbonate. Ind Eng Chem Res 32(10):2305–2317CrossRef

35.

Nolan R (2020) SmarTech issues new report that projects polymer 3D printing to generate $11.7 Billion in 2020. GlobeNewswire News Room. 2 Ma 2020. http://www.globenewswire.com/news-release/2020/03/02/1993819/0/en/SmarTech-Issues-New-Report-That-Projects-Polymer-3D-Printing-to-Generate-11-7-billion-in-2020.html

36.

Palaganas NB, Mangadlao JD, CC, de Leon ACC, Palaganas JO, Pangilinan KD, Lee YJ, Advincula RC (2017) 3D printing of photocurable cellulose nanocrystal composite for fabrication of complex architectures via stereolithography. ACS Appl Mater Interfaces 9(39):34314–34324

37.

Pearlson MN (2018) Additive manufacturing using foaming radiation-curable resin. United States US20180162052A1, filed 6 Dec 2017, and issued 14 June 2018. https://patents.google.com/patent/US20180162052A1/en

38.

Reddy B (2020) Global additive manufacturing & materials market. Growth, trends and forecasts (2020–2025). https://www.mordorintelligence.com/industry-reports/global-additive-manufacturing-and-material-market-industry

39.

Shahrubudin N, Lee TC, Ramlan R (2019) An overview on 3D printing technology: technological, materials, and applications. In: Procedia manufacturing, the 2nd international conference on sustainable materials processing and manufacturing, SMPM 2019, 8–10 Mar 2019, Sun City, South Africa, 35 (January), pp 1286–1296. https://doi.org/10.1016/j.promfg.2019.06.089

40.

Sharma A, Kushvaha V (2020) Predictive modelling of fracture behaviour in silica-filled polymer composite subjected to impact with varying loading rates using artificial neural network. Eng Fract Mech 239(November):107328. https://doi.org/10.1016/j.engfracmech.2020.107328

41.

Sher D (2018) Final parts to drive composites additive manufacturing market to nearly $10 Billion by 2028—2018. SmarTech Analysis. https://www.3dprintingmedia.network/composites-additive-manufacturing-market-2028/

42.

Sreenivasan et al (2010) Sustainability issues in laser-based additive manufacturing. Phys Procedia 5:81–90CrossRef

43.

Steinberg G (2019) Ey-3d-printing-game changer. https://assets.ey.com/content/dam/ey-sites/ey-com/en_gl/topics/advisory/ey-3d-printing-game-changer.pdf?download

44.

The additive manufacturing landscape 2020 [Report]—AMFG. Accessed 19 July 2020. https://core.ac.uk/download/pdf/77018324.pdf

45.

Tseng AA (2001) Adaptable filament deposition system and method for freeform fabrication of three-dimensional objects. Issued 26 June 2001

46.

Tumbleston JR, Shirvanyants D, Ermoshkin N, Janusziewicz R, Johnson AR, Kelly D, Chen K, Pinschmidt R, Rolland JP, Ermoshkin A (2015) Continuous liquid interface production of 3D objects. Science 347(6228):1349–1352CrossRef

47.

Wohlers and Senvol Database (2020) Analysis of Additive Manufacturing materials. https://www.metal-am.com/analysis-of-additive-manufacturing-materials-from-wohlers-and-senvol-database/

48.

Xu J, Jung K, Atme A, Shanmugam S, Boyer C (2014) A robust and versatile photoinduced living polymerization of conjugated and unconjugated monomers and its oxygen tolerance. J Am Chem Soc 136(14):5508–5519CrossRef

49.

Yadroitsev I, Smurov I (2011) Surface morphology in selective laser melting of metal powders. Phys Procedia 12:264–270CrossRef

50.

Yadroitsev I, Bertrand P (2010) Selective laser melting in micro manufacturing. In: Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium. https://www.daaam.info/Downloads/Pdfs/proceedings/proceedings_2010/19717_Annals_1_head.pdf

51.

Yakout M, Elbestawi M, Veldhuis SC (2018) A review of metal additive manufacturing technologies. Solid State Phenom 278(July):1–14. https://doi.org/10.4028/www.scientific.net/SSP.278.1CrossRef

52.

Yuan S, Shen F, Chua CK, Zhou K (2019) Polymeric composites for powder-based additive manufacturing: materials and applications. Prog Polym Sci 91:141–168CrossRef

53.

Zorlutuna P, Jeong JH, Kong H, Bashir R (2011) Stereolithography-based hydrogel microenvironments to examine cellular interactions. Adv Func Mater 21(19):3642–3651CrossRef

Title: Future Trends and Technologies in Additive and Substractive Manufacturing
Authors: Vineet Kumar
Bhargav Reddy Isanaka
Sristi Gupta
Vinod Kushvaha
Publisher: Springer Singapore
Book: Additive and Subtractive Manufacturing of Composites
Print ISBN: 978-981-16-3183-2

Electronic ISBN: 978-981-16-3184-9

Copyright Year: 2021
DOI: https://doi.org/10.1007/978-981-16-3184-9_9

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners