Skip to main content
Top
Published in: Journal of Coatings Technology and Research 1/2024

01-09-2023

Highly improved UV-shielding and mechanical properties of UV-curable epoxy acrylate nanocomposites by incorporating functionalized aramid nanofibers

Authors: Ying Wang, Yuexin Luo, Yuankai Pan, Changmei Sun, Ying Zhang, Chunnuan Ji, Rongjun Qu

Published in: Journal of Coatings Technology and Research | Issue 1/2024

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Introducing nanofillers into UV-curable coatings can not only effectively improve the performance of the coating but also impart new functions to the film. Herein, methacrylate-functionalized aramid nanofibers (mANFs) were constructed by a bottom-up approach, and their influence on the performance of UV-curable epoxy acrylate (EA) coatings was investigated. The microstructure of the EA/mANF nanocomposite was studied using X-ray diffraction and transmission electron microscopy (TEM), which confirmed the homogeneous distribution of mANFs in the matrix. The effect of mANFs on the curing kinetics was investigated. The result showed that the photopolymerization rate and final C = C bond conversion would not be adversely affected until more than 0.1 wt% mANFs were added. The UV–Vis analyses showed that the EA/mANF films maintained high transmittance in the visible light region and exhibited improved UV-shielding performance. The mechanical characteristics of EA/mANF films were significantly improved by mANFs because of strong interactions such as π–π interactions, hydrogen bonds, and chemical bonds between the matrix and mANFs. For the nanocomposite containing 0.025 wt% mANFs, tensile strength and strain at break increased by 53% and 446%, respectively, compared to neat EA. Thus, the introduction of mANFs considerably improved the mechanical performance of UV-curable EA films and expanded their application in the field of UV shielding.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference Işın, D, Kayaman-Apohan, N, Güngör, A, “Preparation and Characterization of UV-Curable Epoxy/Silica Nanocomposite Coatings.” Prog. Org. Coat., 65 (4) 477–483 (2009) Işın, D, Kayaman-Apohan, N, Güngör, A, “Preparation and Characterization of UV-Curable Epoxy/Silica Nanocomposite Coatings.” Prog. Org. Coat., 65 (4) 477–483 (2009)
2.
go back to reference Zhang, S, Guo, M, Chen, Z, Liu, QH, et al. “Grafting Photosensitive Polyurethane Onto Colloidal Silica for Use in UV-Curing Polyurethane Nanocomposites.” Colloid Surf. A, 443 525–534 (2014) Zhang, S, Guo, M, Chen, Z, Liu, QH, et al. “Grafting Photosensitive Polyurethane Onto Colloidal Silica for Use in UV-Curing Polyurethane Nanocomposites.” Colloid Surf. A, 443 525–534 (2014)
3.
go back to reference Zhang, S, Chen, Z, Guo, M, et al. “Waterborne UV-Curable Polycarbonate Polyurethane Nanocomposites Based on Polydimethylsiloxane and Colloidal Silica with Enhanced Mechanical and Surface Properties.” RSC Adv., 4 (58) 30938–30947 (2014) Zhang, S, Chen, Z, Guo, M, et al. “Waterborne UV-Curable Polycarbonate Polyurethane Nanocomposites Based on Polydimethylsiloxane and Colloidal Silica with Enhanced Mechanical and Surface Properties.” RSC Adv., 4 (58) 30938–30947 (2014)
4.
go back to reference Jeong, KM, Park, SS, Nagappan, S, et al. “Highly Transparent, Organic-Inorganic Hybrid UV-Curable Coating Materials with Amphiphobic Characteristics.” Prog. Org. Coat., 134 323–332 (2019) Jeong, KM, Park, SS, Nagappan, S, et al. “Highly Transparent, Organic-Inorganic Hybrid UV-Curable Coating Materials with Amphiphobic Characteristics.” Prog. Org. Coat., 134 323–332 (2019)
5.
go back to reference Park, S, Kim, J, Han, TW, et al. “Mechanical Reinforcement of UV-Curable Polymer Nanocomposite for Nanopatterned Mold.” Microelectron. Eng., 259 111791 (2022) Park, S, Kim, J, Han, TW, et al. “Mechanical Reinforcement of UV-Curable Polymer Nanocomposite for Nanopatterned Mold.” Microelectron. Eng., 259 111791 (2022)
6.
go back to reference Cui, Y, Chen, Z, Liu, X, “Preparation of UV-Curing Polymer-ZrO2 Hybrid Nanocomposites via Auto-Hydrolysis Sol-Gel Process Using Zirconium Oxychloride Octahydrate Coordinated with Organic Amine.” Prog. Org. Coat., 100 178–187 (2016) Cui, Y, Chen, Z, Liu, X, “Preparation of UV-Curing Polymer-ZrO2 Hybrid Nanocomposites via Auto-Hydrolysis Sol-Gel Process Using Zirconium Oxychloride Octahydrate Coordinated with Organic Amine.” Prog. Org. Coat., 100 178–187 (2016)
7.
go back to reference Macarie, L, Plesu, N, Iliescu, S, et al. “UV-Curable Nanocomposites Containing Zirconium Vinylphosphonate or Zirconia.” J. Appl. Polym. Sci., 119 (3) 1820–1826 (2010) Macarie, L, Plesu, N, Iliescu, S, et al. “UV-Curable Nanocomposites Containing Zirconium Vinylphosphonate or Zirconia.” J. Appl. Polym. Sci., 119 (3) 1820–1826 (2010)
8.
go back to reference Pavlacky, E, Webster, DC, “An In Situ Intercalative Polymerization Method for Preparing UV Curable Clay-Polymer Nanocomposites.” J. Appl. Polym. Sci., 132 42601 (2015) Pavlacky, E, Webster, DC, “An In Situ Intercalative Polymerization Method for Preparing UV Curable Clay-Polymer Nanocomposites.” J. Appl. Polym. Sci., 132 42601 (2015)
9.
go back to reference Lv, S, Wei, Z, Song, L, et al. “A Novel Method for Preparation of Exfoliated UV-Curable Polymer/Clay Nanocomposites.” Eur. Polym. J., 44 (6) 1613–1619 (2008) Lv, S, Wei, Z, Song, L, et al. “A Novel Method for Preparation of Exfoliated UV-Curable Polymer/Clay Nanocomposites.” Eur. Polym. J., 44 (6) 1613–1619 (2008)
10.
go back to reference Jeong, YG, An, JE, “UV-Cured Epoxy/Graphene Nanocomposite Films: Preparation, Structures and Electric Heating Performance.” Polym. Int., 63 (11) 1895–1901 (2014) Jeong, YG, An, JE, “UV-Cured Epoxy/Graphene Nanocomposite Films: Preparation, Structures and Electric Heating Performance.” Polym. Int., 63 (11) 1895–1901 (2014)
11.
go back to reference Martin-Gallego, M, Verdejo, R, Lopez-Manchado, MA, et al. “Epoxy-Graphene UV-Cured Nanocomposites.” Polymer., 52 (21) 4664–4669 (2011) Martin-Gallego, M, Verdejo, R, Lopez-Manchado, MA, et al. “Epoxy-Graphene UV-Cured Nanocomposites.” Polymer., 52 (21) 4664–4669 (2011)
12.
go back to reference Yu, B, Shi, Y, Yuan, B, et al. “Click-Chemistry Approach for Graphene Modification: Effective Reinforcement of UV-Curable Functionalized Graphene/Polyurethane Acrylate Nanocomposites.” RSC Adv., 5 (18) 13502–13506 (2015) Yu, B, Shi, Y, Yuan, B, et al. “Click-Chemistry Approach for Graphene Modification: Effective Reinforcement of UV-Curable Functionalized Graphene/Polyurethane Acrylate Nanocomposites.” RSC Adv., 5 (18) 13502–13506 (2015)
13.
go back to reference Li, YW, Zhong, J, Wu, LX, et al. “High Performance POSS Filled Nanocomposites Prepared via UV-Curing Based on 3D Stereolithography Printing.” Compos. Part A Appl. Sci., 117 276–286 (2019) Li, YW, Zhong, J, Wu, LX, et al. “High Performance POSS Filled Nanocomposites Prepared via UV-Curing Based on 3D Stereolithography Printing.” Compos. Part A Appl. Sci., 117 276–286 (2019)
14.
go back to reference Wang, Y, Liu, FG, Xue, XX, “Morphology and Properties of UV-Curing Epoxy Acrylate Coatings Modified with Methacryl-POSS.” Prog. Org. Coat., 78 404–410 (2015) Wang, Y, Liu, FG, Xue, XX, “Morphology and Properties of UV-Curing Epoxy Acrylate Coatings Modified with Methacryl-POSS.” Prog. Org. Coat., 78 404–410 (2015)
15.
go back to reference Toker, RD, Kayaman-Apohan, N, Kahraman, MV, “UV-Curable Nano-Silver Containing Polyurethane Based Organic–Inorganic Hybrid Coatings.” Prog. Org. Coat., 76 (9) 1243–1250 (2013) Toker, RD, Kayaman-Apohan, N, Kahraman, MV, “UV-Curable Nano-Silver Containing Polyurethane Based Organic–Inorganic Hybrid Coatings.” Prog. Org. Coat., 76 (9) 1243–1250 (2013)
16.
go back to reference Chen, SL, Zhang, SD, Li, YF, et al. “Synthesis and Properties of Novel UV-Curable Hyperbranched Waterborne Polyurethane/Fe3O4 Nanocomposite Films with Excellent Magnetic Properties.” RSC Adv., 5 (6) 4355–4363 (2015) Chen, SL, Zhang, SD, Li, YF, et al. “Synthesis and Properties of Novel UV-Curable Hyperbranched Waterborne Polyurethane/Fe3O4 Nanocomposite Films with Excellent Magnetic Properties.” RSC Adv., 5 (6) 4355–4363 (2015)
17.
go back to reference Birtane, H, Urucu, OA, Yildiz, N, et al. “Statistical Optimization and Selective Uptake of Au(III) from Aqueous Solution Using Carbon Nanotube-Cellulose Based Adsorbent.” Mater. Today Commun., 30 103144 (2022) Birtane, H, Urucu, OA, Yildiz, N, et al. “Statistical Optimization and Selective Uptake of Au(III) from Aqueous Solution Using Carbon Nanotube-Cellulose Based Adsorbent.” Mater. Today Commun., 30 103144 (2022)
18.
go back to reference Arias-Ferreiro, G, Lasagabaster-Latorre, A, Ares-Pernas, A, et al. “Flexible 3D Printed Acrylic Composites Based on Polyaniline/Multiwalled Carbon Nanotubes for Piezoresistive Pressure Sensors.” Adv. Electron. Mater., 8 2200590 (2022) Arias-Ferreiro, G, Lasagabaster-Latorre, A, Ares-Pernas, A, et al. “Flexible 3D Printed Acrylic Composites Based on Polyaniline/Multiwalled Carbon Nanotubes for Piezoresistive Pressure Sensors.” Adv. Electron. Mater., 8 2200590 (2022)
20.
go back to reference Wang, Y, Cao, ZC, Liu, FG, et al. “Synthesis and Characterization of UV-Curing Epoxy Acrylate Coatings Modified with Organically Modified Rectorite.” J. Coat. Technol. Res., 14 (1) 107–115 (2017) Wang, Y, Cao, ZC, Liu, FG, et al. “Synthesis and Characterization of UV-Curing Epoxy Acrylate Coatings Modified with Organically Modified Rectorite.” J. Coat. Technol. Res., 14 (1) 107–115 (2017)
21.
go back to reference Dehghan, A, Zohuriaan-Mehr, MJ, Salimi, A, “Rapid Preparation of Epoxy Acrylate-Clay Nanocomposite: Simultaneous Acrylation/Nanoclay Dispersion Under Ultrasonication.” Prog. Org. Coat., 108 44–50 (2017) Dehghan, A, Zohuriaan-Mehr, MJ, Salimi, A, “Rapid Preparation of Epoxy Acrylate-Clay Nanocomposite: Simultaneous Acrylation/Nanoclay Dispersion Under Ultrasonication.” Prog. Org. Coat., 108 44–50 (2017)
22.
go back to reference Nkeuwa, WN, Riedl, B, Landry, V, “UV-Cured Clay/based Nanocomposite Topcoats for Wood Furniture. Part II: Dynamic Viscoelastic Behavior and Effect of Relative Humidity on the Mechanical Properties.” Prog. Org. Coat., 77 (1) 12–23 (2014) Nkeuwa, WN, Riedl, B, Landry, V, “UV-Cured Clay/based Nanocomposite Topcoats for Wood Furniture. Part II: Dynamic Viscoelastic Behavior and Effect of Relative Humidity on the Mechanical Properties.” Prog. Org. Coat., 77 (1) 12–23 (2014)
23.
go back to reference Xie, H, Wu, QH, Shi, WF, “Preparation of Photopolymerized Nanocomposites Through Intercalating Multifunctional Acrylated Siloxane into Montmorillonite.” Appl. Clay. Sci., 99 164–170 (2014) Xie, H, Wu, QH, Shi, WF, “Preparation of Photopolymerized Nanocomposites Through Intercalating Multifunctional Acrylated Siloxane into Montmorillonite.” Appl. Clay. Sci., 99 164–170 (2014)
24.
go back to reference Wang, Y, Liu, FG, Xue, XX, “Preparation and Properties of UV-Cured Epoxy Acrylate/Glycidyl-POSS Coatings.” J. Coat. Technol. Res., 14 (3) 665–672 (2017) Wang, Y, Liu, FG, Xue, XX, “Preparation and Properties of UV-Cured Epoxy Acrylate/Glycidyl-POSS Coatings.” J. Coat. Technol. Res., 14 (3) 665–672 (2017)
25.
go back to reference Wang, Y, Liu, FG, Xue, XX, “Synthesis and Characterization of UV-Cured Epoxy Acrylate/POSS Nanocomposites.” Prog. Org. Coat., 76 (5) 863–869 (2013) Wang, Y, Liu, FG, Xue, XX, “Synthesis and Characterization of UV-Cured Epoxy Acrylate/POSS Nanocomposites.” Prog. Org. Coat., 76 (5) 863–869 (2013)
26.
go back to reference Gao, JG, Lv, HQ, Zhang, XF, et al. “Synthesis and Properties of Waterborne Epoxy Acrylate Nanocomposite Coating Modified by MAP-POSS.” Prog. Org. Coat., 76 (10) 1477–1483 (2013) Gao, JG, Lv, HQ, Zhang, XF, et al. “Synthesis and Properties of Waterborne Epoxy Acrylate Nanocomposite Coating Modified by MAP-POSS.” Prog. Org. Coat., 76 (10) 1477–1483 (2013)
27.
go back to reference Wang, XF, Wang, X, Song, L, et al. “Preparation and Thermal Stability of UV-Cured Epoxy-based Coatings Modified with Octamercaptopropyl POSS.” Thermochim Acta., 568 130–139 (2013) Wang, XF, Wang, X, Song, L, et al. “Preparation and Thermal Stability of UV-Cured Epoxy-based Coatings Modified with Octamercaptopropyl POSS.” Thermochim Acta., 568 130–139 (2013)
28.
go back to reference Liu, FG, Miao, LQ, Wang, Y, et al. “Green Fabrication of Ultraviolet Curable Epoxy Acrylate-Silica Hybrid Coatings.” Prog. Org. Coat., 109 38–44 (2017) Liu, FG, Miao, LQ, Wang, Y, et al. “Green Fabrication of Ultraviolet Curable Epoxy Acrylate-Silica Hybrid Coatings.” Prog. Org. Coat., 109 38–44 (2017)
29.
go back to reference Yang, ZH, Ni, AQ, Wang, JH, “Synthesis and Characterization of Novel Ultraviolet-Curing Polyurethane Acrylate/Epoxy Acrylate/SiO2 Hybrid Materials via Sol-Gel Reaction.” J. Appl. Polym. Sci., 127 (4) 2905–2909 (2013) Yang, ZH, Ni, AQ, Wang, JH, “Synthesis and Characterization of Novel Ultraviolet-Curing Polyurethane Acrylate/Epoxy Acrylate/SiO2 Hybrid Materials via Sol-Gel Reaction.” J. Appl. Polym. Sci., 127 (4) 2905–2909 (2013)
30.
go back to reference Kardar, P, Ebrahimi, M, Bastani, S, “UV Curing Behavior and Mechanical Properties of Unpigmented and Pigmented Epoxy Acrylate/SiO2 Nanocomposites.” J. Therm. Anal. Calorim., 124 (3) 1425–1430 (2016) Kardar, P, Ebrahimi, M, Bastani, S, “UV Curing Behavior and Mechanical Properties of Unpigmented and Pigmented Epoxy Acrylate/SiO2 Nanocomposites.” J. Therm. Anal. Calorim., 124 (3) 1425–1430 (2016)
31.
go back to reference Shang, D, Sun, XY, Hang, JZ, et al. “Preparation and Stability of Silica Sol/TPGDA Dispersions and Its Application in the UV-Curable Hybrid Coatings for Fire Protection.” J. Sol.-Gel. Sci. Technol., 67 (1) 39–49 (2013) Shang, D, Sun, XY, Hang, JZ, et al. “Preparation and Stability of Silica Sol/TPGDA Dispersions and Its Application in the UV-Curable Hybrid Coatings for Fire Protection.” J. Sol.-Gel. Sci. Technol., 67 (1) 39–49 (2013)
32.
go back to reference Pan, HF, Song, L, Ma, LY, et al. “Transparent Epoxy Acrylate Resin Nanocomposites Reinforced with Cellulose Nanocrystals.” Ind. Eng. Chem. Res., 51 (50) 16326–16332 (2012) Pan, HF, Song, L, Ma, LY, et al. “Transparent Epoxy Acrylate Resin Nanocomposites Reinforced with Cellulose Nanocrystals.” Ind. Eng. Chem. Res., 51 (50) 16326–16332 (2012)
33.
go back to reference Xing, WY, Jie, GX, Song, L, et al. “Flame Retardancy and Thermal Properties of Epoxy Acrylate Resin/Alpha-Zirconium Phosphate Nanocomposites Used for UV-Curing Flame Retardant Films.” Mater. Chem. Phys., 125 (1–2) 196–201 (2011) Xing, WY, Jie, GX, Song, L, et al. “Flame Retardancy and Thermal Properties of Epoxy Acrylate Resin/Alpha-Zirconium Phosphate Nanocomposites Used for UV-Curing Flame Retardant Films.” Mater. Chem. Phys., 125 (1–2) 196–201 (2011)
34.
go back to reference Xing, WY, Song, L, Lv, XQ, et al. “Preparation, Combustion and Thermal Behaviors of UV-Cured Coatings Containing Organically Modified Alpha-ZrP.” J. Polym. Res., 18 (2) 179–185 (2011) Xing, WY, Song, L, Lv, XQ, et al. “Preparation, Combustion and Thermal Behaviors of UV-Cured Coatings Containing Organically Modified Alpha-ZrP.” J. Polym. Res., 18 (2) 179–185 (2011)
35.
go back to reference Uysal, E, Cakir, M, Ekici, B, “Graphene Oxide/Epoxy Acrylate Nanocomposite Production via SLA and Importance of Graphene Oxide Surface Modification for Mechanical Properties.” Rapid. Prototyping J., 27 (4) 682–691 (2021) Uysal, E, Cakir, M, Ekici, B, “Graphene Oxide/Epoxy Acrylate Nanocomposite Production via SLA and Importance of Graphene Oxide Surface Modification for Mechanical Properties.” Rapid. Prototyping J., 27 (4) 682–691 (2021)
36.
go back to reference Zhang, JH, Zhang, DH, Zhang, AQ, et al. “Poly(methyl methacrylate) Grafted Halloysite Nanotubes and Its Epoxy Acrylate Composites by Ultraviolet Curing Method.” J. Reinf. Plast. Comp., 32 (10) 713–725 (2013) Zhang, JH, Zhang, DH, Zhang, AQ, et al. “Poly(methyl methacrylate) Grafted Halloysite Nanotubes and Its Epoxy Acrylate Composites by Ultraviolet Curing Method.” J. Reinf. Plast. Comp., 32 (10) 713–725 (2013)
37.
go back to reference Li, SY, Qiu, SL, Yu, B, et al. “POSS-Functionalized Polyphosphazene Nanotube: Preparation and Effective Reinforcement on UV-Curable Epoxy Acrylate Nanocomposite Coatings.” RSC Adv., 6 (4) 3025–3031 (2016) Li, SY, Qiu, SL, Yu, B, et al. “POSS-Functionalized Polyphosphazene Nanotube: Preparation and Effective Reinforcement on UV-Curable Epoxy Acrylate Nanocomposite Coatings.” RSC Adv., 6 (4) 3025–3031 (2016)
38.
go back to reference dos Santos, MN, Opelt, CV, Lafratta, FH, et al. “Thermal and Mechanical Properties of a Nanocomposite of a Photocurable Epoxy-Acrylate Resin and Multiwalled Carbon Nanotubes.” Mat. Sci. Eng. A-Struct., 528 (13) 4318–4324 (2011) dos Santos, MN, Opelt, CV, Lafratta, FH, et al. “Thermal and Mechanical Properties of a Nanocomposite of a Photocurable Epoxy-Acrylate Resin and Multiwalled Carbon Nanotubes.” Mat. Sci. Eng. A-Struct., 528 (13) 4318–4324 (2011)
39.
go back to reference Xing, WY, Song, L, Wang, X, et al. “Preparation, Combustion, and Thermal Behavior of UV-Cured Epoxy-based Coatings Containing Layered Double Hydroxide.” Polym. Adv. Technol., 22 (12) 1859–1864 (2011) Xing, WY, Song, L, Wang, X, et al. “Preparation, Combustion, and Thermal Behavior of UV-Cured Epoxy-based Coatings Containing Layered Double Hydroxide.” Polym. Adv. Technol., 22 (12) 1859–1864 (2011)
40.
go back to reference Zhou, GD, Wang, WT, Peng, M, “Functionalized Aramid Nanofibers Prepared by Polymerization Induced Self Assembly for Simultaneously Reinforcing and Toughening of Epoxy and Carbon Fiber/Epoxy Multiscale Composite.” Compos. Sci. Technol., 168 312–319 (2018) Zhou, GD, Wang, WT, Peng, M, “Functionalized Aramid Nanofibers Prepared by Polymerization Induced Self Assembly for Simultaneously Reinforcing and Toughening of Epoxy and Carbon Fiber/Epoxy Multiscale Composite.” Compos. Sci. Technol., 168 312–319 (2018)
41.
go back to reference Patterson, BA, Malakooti, MH, Lin, JJ, et al. “Aramid Nanofibers for Multiscale Fiber Reinforcement of Polymer Composites.” Compos. Sci. Technol., 161 92–99 (2018) Patterson, BA, Malakooti, MH, Lin, JJ, et al. “Aramid Nanofibers for Multiscale Fiber Reinforcement of Polymer Composites.” Compos. Sci. Technol., 161 92–99 (2018)
42.
go back to reference Jung, J, Sodano, HA, “High Strength Epoxy Nanocomposites Reinforced by Epoxy Functionalized Aramid Nanofibers.” Polymer., 195 122438 (2020) Jung, J, Sodano, HA, “High Strength Epoxy Nanocomposites Reinforced by Epoxy Functionalized Aramid Nanofibers.” Polymer., 195 122438 (2020)
44.
go back to reference Chen, Y, Yin, Q, Zhang, XM, et al. “Rational Design of Multifunctional Properties for Styrene-Butadiene Rubber Reinforced by Modified Kevlar Nanofibers.” Compos. Part B-Eng., 166 196–203 (2019) Chen, Y, Yin, Q, Zhang, XM, et al. “Rational Design of Multifunctional Properties for Styrene-Butadiene Rubber Reinforced by Modified Kevlar Nanofibers.” Compos. Part B-Eng., 166 196–203 (2019)
45.
go back to reference Zhang, XM, Chen, Y, Yin, Q, et al. “Highly Improved Compatibility and Mechanical Properties of Carboxylated Nitrile Rubber/Styrene Butadiene Rubber by Incorporating Modified Kevlar Nanofibers.” Mater Chem Phys., 238 121926 (2019) Zhang, XM, Chen, Y, Yin, Q, et al. “Highly Improved Compatibility and Mechanical Properties of Carboxylated Nitrile Rubber/Styrene Butadiene Rubber by Incorporating Modified Kevlar Nanofibers.” Mater Chem Phys., 238 121926 (2019)
46.
go back to reference Jung, J, Sodano, HA, “Aramid Nanofiber Reinforced Rubber Compounds for the Application of Tire Tread with High Abrasion Resistance and Fuel Saving Efficiency.” ACS Appl. Polym. Mater., 2 (11) 4874–4884 (2020) Jung, J, Sodano, HA, “Aramid Nanofiber Reinforced Rubber Compounds for the Application of Tire Tread with High Abrasion Resistance and Fuel Saving Efficiency.” ACS Appl. Polym. Mater., 2 (11) 4874–4884 (2020)
47.
go back to reference Xue, XD, Jiang, K, Yin, Q, et al. “Tailoring the Structure of Kevlar Nanofiber and its Effects on the Mechanical Property and Thermal Stability of Carboxylated Acrylonitrile Butadiene Rubber.” J. Appl. Polym. Sci., 136 (26) 47698 (2019) Xue, XD, Jiang, K, Yin, Q, et al. “Tailoring the Structure of Kevlar Nanofiber and its Effects on the Mechanical Property and Thermal Stability of Carboxylated Acrylonitrile Butadiene Rubber.” J. Appl. Polym. Sci., 136 (26) 47698 (2019)
48.
go back to reference Koo, JM, Kim, H, Lee, M, et al. “Nonstop Monomer-to-Aramid Nanofiber Synthesis with Remarkable Reinforcement Ability.” Macromolecules., 522 (3) 923–934 (2019) Koo, JM, Kim, H, Lee, M, et al. “Nonstop Monomer-to-Aramid Nanofiber Synthesis with Remarkable Reinforcement Ability.” Macromolecules., 522 (3) 923–934 (2019)
49.
go back to reference Kuang, QX, Zhang, D, Yu, JC, et al. “Toward Record-High Stiffness in Polyurethane Nanocomposites Using Aramid Nanofibers.” J. Phys. Chem. C., 119 (49) 27467–27477 (2015) Kuang, QX, Zhang, D, Yu, JC, et al. “Toward Record-High Stiffness in Polyurethane Nanocomposites Using Aramid Nanofibers.” J. Phys. Chem. C., 119 (49) 27467–27477 (2015)
50.
go back to reference He, R, Xie, CJ, Chen, YX, et al. “Robust and Highly Resilient Waterborne Polyurethane-based Composite Aerogels Prepared by Blending with Aramid Nanofibers.” Compos. Sci. Technol., 228 109622 (2022) He, R, Xie, CJ, Chen, YX, et al. “Robust and Highly Resilient Waterborne Polyurethane-based Composite Aerogels Prepared by Blending with Aramid Nanofibers.” Compos. Sci. Technol., 228 109622 (2022)
51.
go back to reference Guan, Y, Li, W, Zhang, Y, et al. “Aramid Nanofibers and Poly(vinyl alcohol) Nanocomposites for Ideal Combination of Strength and Toughness via Hydrogen Bonding Interactions.” Compos. Sci. Technol., 144 193–201 (2017) Guan, Y, Li, W, Zhang, Y, et al. “Aramid Nanofibers and Poly(vinyl alcohol) Nanocomposites for Ideal Combination of Strength and Toughness via Hydrogen Bonding Interactions.” Compos. Sci. Technol., 144 193–201 (2017)
52.
go back to reference Park, SA, Eom, Y, Jeon, H, et al. “Aramid Nanofiber Templated In Situ SNAr Polymerization for Maximizing the Performance of All-Organic Nanocomposites.” ACS Macro Lett., 9 (4) 558–564 (2020) Park, SA, Eom, Y, Jeon, H, et al. “Aramid Nanofiber Templated In Situ SNAr Polymerization for Maximizing the Performance of All-Organic Nanocomposites.” ACS Macro Lett., 9 (4) 558–564 (2020)
53.
go back to reference Dong, CC, Guo, P, Yuan, Y, et al. “Aramid Nanomaterials of Various Morphologies: Preparation and Mechanical Property Enhancement.” Front. Chem., 7 939 (2020) Dong, CC, Guo, P, Yuan, Y, et al. “Aramid Nanomaterials of Various Morphologies: Preparation and Mechanical Property Enhancement.” Front. Chem., 7 939 (2020)
54.
go back to reference Nasser, J, Zhang, LS, Lin, JJ, et al. “Aramid Nanofiber Reinforced Polymer Nanocomposites via Amide-Amide Hydrogen Bonding.” ACS Appl. Polym. Mater., 2 (7) 2934–2945 (2020) Nasser, J, Zhang, LS, Lin, JJ, et al. “Aramid Nanofiber Reinforced Polymer Nanocomposites via Amide-Amide Hydrogen Bonding.” ACS Appl. Polym. Mater., 2 (7) 2934–2945 (2020)
55.
go back to reference Wang, Y, Qu, R, Pan, Y, et al. “High-Performance UV-Curable Epoxy Acrylate Nanocomposite Coatings Reinforced with Aramid Nanofibers.” Prog. Org. Coat., 163 106631 (2022) Wang, Y, Qu, R, Pan, Y, et al. “High-Performance UV-Curable Epoxy Acrylate Nanocomposite Coatings Reinforced with Aramid Nanofibers.” Prog. Org. Coat., 163 106631 (2022)
56.
go back to reference Shi, YF, Qiu, T, Tuo, XL, “The Bottom-up Synthesis for Aramid Nanofibers: The Influence of Copolymerization.” J. Appl. Polym. Sci., 137 (48) 49589 (2020) Shi, YF, Qiu, T, Tuo, XL, “The Bottom-up Synthesis for Aramid Nanofibers: The Influence of Copolymerization.” J. Appl. Polym. Sci., 137 (48) 49589 (2020)
57.
go back to reference Yan, H, Li, J, Tian, W, et al. “A New Approach to the Preparation of Poly(p-phenylene terephthalamide) Nanofibers.” RSC Adv., 6 (32) 26599–26605 (2016) Yan, H, Li, J, Tian, W, et al. “A New Approach to the Preparation of Poly(p-phenylene terephthalamide) Nanofibers.” RSC Adv., 6 (32) 26599–26605 (2016)
58.
go back to reference Fan, JC, Shi, ZX, Zhang, L, et al. “Aramid Nanofiber-Functionalized Graphene Nanosheets for Polymer Reinforcement.” Nanoscale., 4 (22) 7046–7055 (2012) Fan, JC, Shi, ZX, Zhang, L, et al. “Aramid Nanofiber-Functionalized Graphene Nanosheets for Polymer Reinforcement.” Nanoscale., 4 (22) 7046–7055 (2012)
Metadata
Title
Highly improved UV-shielding and mechanical properties of UV-curable epoxy acrylate nanocomposites by incorporating functionalized aramid nanofibers
Authors
Ying Wang
Yuexin Luo
Yuankai Pan
Changmei Sun
Ying Zhang
Chunnuan Ji
Rongjun Qu
Publication date
01-09-2023
Publisher
Springer US
Published in
Journal of Coatings Technology and Research / Issue 1/2024
Print ISSN: 1547-0091
Electronic ISSN: 1935-3804
DOI
https://doi.org/10.1007/s11998-023-00822-2

Other articles of this Issue 1/2024

Journal of Coatings Technology and Research 1/2024 Go to the issue

Premium Partners