Hyperbranch-polyethyleniminated functional polymers II: effect of polyethyleniminated polyoxypropylenediamines on copper nanoparticle formation in aqueous solution

Colloidal aqueous solution of zerovalent copper (Cu(0)) nanoparticles were prepared from the Cu²⁺ ions coordinated with polyethyleniminated polyoxypropylenediamines (D400(EI) _x ) followed by chemical reduction of NaBH₄. Aqueous solution of copper clusters formed in the presence of D400(EI)₈ with a loading ratio of [EI]/[Cu²⁺] = 3 were stable without precipitation for standing more than 1 month. The protective effects of D400(EI) _x and the particle size of the resulted Cu nanoparticle are regulated by the attachments of ethylenimine (EI) groups per polymer backbone and the normality ratio of [EI]/[Cu²⁺] used. It is found that the more EI-content per polymer backbone results in the smaller particle size and the narrower size dispersity of the colloidal Cu(0) particles, and the average particle size of 5.07 nm with standard deviation of 0.86 nm was obtained in the presence of D400(EI)₈ with the ratio of [EI]/[Cu²⁺] = 3. As the polymer concentration of D400(EI)₈ increases (the increase of [EI]/[Cu²⁺]), the average particle size of the prepared Cu(0) nanoparticle slightly changes, but interestingly, the size dispersity gradually decreases, where the standard deviation for the concentration at [EI]/[Cu²⁺] = 5 is 0.82 nm approaching that for monodispersed nanoparticles (0.5 nm).