Top

Structural and Multidisciplinary Optimization

Published in:

06-01-2020 | Review Paper

Identification of elastic properties utilizing non-destructive vibrational evaluation methods with emphasis on definition of objective functions: a review

Author: Jun Hui Tam

Published in: Structural and Multidisciplinary Optimization | Issue 4/2020

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Defining a suitable objective function is important as it affects the solution search process and the solution quality. In vibrational material identification, a number of objective functions have been employed since the last decades. It is the intent of the present study to provide a comprehensive review of the previous and current trends of non-destructive vibrational material identification with emphasis on the definition of objective function. Prior to defining an objective function, several aspects should be given utmost attention, including selection of responses, design variables and goals. Along with the critical review of past research, potential areas that could be worth for future investigation are as well explicated.

previous article A regression-based approach for estimating preliminary dimensioning of reinforced concrete cantilever retaining walls

next article Crashworthiness analysis and multi-objective optimization of expanding circular tube energy absorbers with cylindrical anti-clamber under eccentric loading for subway vehicles

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Anghileri M, Chirwa EC, Lanzi L, Mentuccia F (2005) An inverse approach to identify the constitutive model parameters for crashworthiness modelling of composite structures. Compos Struct 68:65–74. https://doi.org/10.1016/j.compstruct.2004.03.001CrossRef

Aragh BS, Farahani EB, Barati AN (2013) Natural frequency analysis of continuously graded carbon nanotube-reinforced cylindrical shells based on third-order shear deformation theory. Math Mech Solids 18:264–284. https://doi.org/10.1177/1081286512438794CrossRef

Araujo AL, Soares CMM, de Freitas MJM (1996) Characterization of material parameters of composite plate specimens using optimization and experimental vibrational data. Compos Part B: Eng 27:185–191. https://doi.org/10.1016/1359-8368(95)00050-XCrossRef

Araujo AL, Soares CMM, de Freitas MJM, Pedersen P, Herskovits J (2000) Combined numerical-experimental model for the identification of mechanical properties of laminated structures. Compos Struct 50:363–372. https://doi.org/10.1016/S0263-8223(00)00113-6CrossRef

Araújo AL, Mota Soares CM, Herskovits J, Pedersen P (2002) Development of a finite element model for the identification of mechanical and piezoelectric properties through gradient optimisation and experimental vibration data. Compos Struct 58:307–318. https://doi.org/10.1016/S0263-8223(02)00192-7CrossRef

Araujo AL, Lopes HMR, Vaz MAP, Soares CMM, Herskovits J, Pedersen P (2006a) Parameter estimation in active plate structures. Comput Struct 84:1471–1479. https://doi.org/10.1016/j.compstruc.2006.01.017CrossRef

Araujo AL, Soares CMM, Herskovits J, Pedersen P (2006b) Parameter estimation in active plate structures using gradient optimisation and neural networks. Inverse Problems Sci Eng 14:483–493. https://doi.org/10.1080/17415970600573676CrossRefMATH

Arora RK (2015) Optimization: algorithms and applications. CRC Press, Boca RatonCrossRef

Auzins J, Chate A, Rikards R, Skukis E (2015) Metamodeling and robust minimization approach for the identification of elastic properties of composites by vibration method. Zamm-Z Angew Math Me 95:1012–1026. https://doi.org/10.1002/zamm.201500008MathSciNetCrossRefMATH

Avril S et al (2008) Overview of identification methods of mechanical parameters based on full-field measurements. Exp Mech 48:381–402. https://doi.org/10.1007/s11340-008-9148-yCrossRef

Bledzki AK, Kessler A, Rikards R, Chate A (1999) Determination of elastic constants of glass/epoxy unidirectional laminates by the vibration testing of plates. Compos Sci Technol 59:2015–2024. https://doi.org/10.1016/S0266-3538(99)00059-7CrossRef

Bolzon G, Ghilotti D, Maier G1997 Parameter identification of the cohesive crack model. In, Dordrecht, . Material Identification Using Mixed Numerical Experimental Methods. Springer Netherlands, pp 213–222

Borza DN (2004) Vibration-based identification of isotropic material properties by quasi-binary electronic holography and finite element modelling. Inverse Problems Sci Eng 12:45–57. https://doi.org/10.1080/10682760310001597509CrossRef

Brancheriau L (2014) An alternative solution for the determination of elastic parameters in free-free flexural vibration of a Timoshenko beam. Wood Sci Technol 48:1269–1279. https://doi.org/10.1007/s00226-014-0672-xCrossRef

Cazzani A, Rizzi NL, Stochino F, Turco E (2018) Modal analysis of laminates by a mixed assumed-strain finite element model. Math Mech Solids 23:99–119. https://doi.org/10.1177/1081286516666405MathSciNetCrossRefMATH

Conceição António C, Rasheed S (2018) A displacement field approach based on FEM-ANN and experiments for identification of elastic properties of composites. Int J Adv Manuf Technol 95:4279–4291. https://doi.org/10.1007/s00170-017-1439-yCrossRef

Coolican H (2014) Research methods and statistics in psychology, 6th ed. Research methods and statistics in psychology, 6th ed. Psychology Press, New York, NY, US

Cornuéjols G, Peña J, Tütüncü R (2018) Optimization methods in finance, 2nd edn. Cambridge University Press, Cambridge. https://doi.org/10.1017/9781107297340CrossRefMATH

Cugnoni J, Gmur T, Schorderet A (2007) Inverse method based on modal analysis for characterizing the constitutive properties of thick composite plates. Comput Struct 85:1310–1320. https://doi.org/10.1016/j.compstruc.2006.08.090CrossRef

Cunha J, Cogan S, Berthod C (1999) Application of genetic algorithms for the identification of elastic constants of composite materials from dynamic tests. Int J Numer Methods Eng 45:891–900. https://doi.org/10.1002/(SICI)1097-0207(19990710)45:7<891::AID-NME610>3.0.CO;2-1CrossRefMATH

Daghia F, de Miranda S, Ubertini F, Viola E (2007) Estimation of elastic constants of thick laminated plates within a Bayesian framework. Compos Struct 80:461–473. https://doi.org/10.1016/j.compstruct.2006.06.030CrossRef

Dennis JE Jr, Schnabel RB (1996) Numerical methods for unconstrained optimization and nonlinear equations (Classics in Applied Mathematics, 16). Soc for Industrial \& Applied Math,

Deobald LR, Gibson RF (1988) Determination of elastic-constants of orthotropic plates by a modal-analysis Rayleigh-Ritz technique. J Sound Vib 124:269–283. https://doi.org/10.1016/S0022-460x(88)80187-1CrossRef

Dimitrovová Z, Rodrigues HC (2010) Optimization of passive vibration isolators mechanical characteristics. Struct Multidiscip O 42:325–340. https://doi.org/10.1007/s00158-010-0510-1CrossRef

Droz C, Bareille O, Ichchou MN (2017) A new procedure for the determination of structural characteristics of sandwich plates in medium frequencies. Compos Part B: Eng 112:103–111. https://doi.org/10.1016/j.compositesb.2016.12.023CrossRef

Frederiksen PS (1997) Application of an improved model for the identification of material parameters. Mech Compos Mater Struct 4:297–316. https://doi.org/10.1080/10759419708945886CrossRef

Gardner J, Kusner M, Zhixiang, Weinberger K, Cunningham J (2014) Bayesian optimization with inequality constraints. Paper presented at the Proceedings of the 31st International Conference on Machine Learning, Proceedings of Machine Learning Research,

Gibson RF (2016) Principles of composite material mechanics, 4th edn. CRC Press

Grediac M (2004) The use of full-field measurement methods in composite material characterization: interest and limitations. Compos A: Appl Sci Manuf 35:751–761. https://doi.org/10.1016/j.compositesa.2004.01.019CrossRef

Hwang SF, Chang CS (2000) Determination of elastic constants of materials by vibration testing. Compos Struct 49:183–190. https://doi.org/10.1016/S0263-8223(99)00132-4CrossRef

Hwang SF, Wu JC, He RS (2009) Identification of effective elastic constants of composite plates based on a hybrid genetic algorithm. Compos Struct 90:217–224. https://doi.org/10.1016/j.compstruct.2009.03.021CrossRef

Hwang SF, Wu JC, Barkanovs E, Belevicius R (2010) Elastic constants of composite materials by an inverse determination method based on a hybrid genetic algorithm. J Mech 26:345–353. https://doi.org/10.1017/S1727719100003907CrossRef

Ismail Z, Khov H, Li WL (2011) Identifying material properties of composite materials from vibration data. World J Eng 20:471–472

Ismail Z, Khov H, Li WL (2013) Determination of material properties of orthotropic plates with general boundary conditions using Inverse method and Fourier series. Measurement 46:1169–1177. https://doi.org/10.1016/j.measurement.2012.11.005CrossRef

Jiang D, Li YB, Fei QG, Wu SQ (2015) Prediction of uncertain elastic parameters of a braided composite. Compos Struct 126:123–131. https://doi.org/10.1016/j.compstruct.2015.02.004CrossRef

Lai TC, Ip KH (1996) Parameter estimation of orthotropic plates by Bayesian sensitivity analysis. Compos Struct 34:29–42. https://doi.org/10.1016/0263-8223(95)00128-XCrossRef

Larsson D (1997) Using modal analysis for estimation of anisotropic material constants. J Eng Mech 123:222–229. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:3(222)CrossRef

Lasn K, Echtermeyer AT, Klauson A, Chati F, Decultot D (2015) Comparison of laminate stiffness as measured by three experimental methods. Polym Test 44:143–152. https://doi.org/10.1016/j.polymertesting.2015.04.006CrossRef

Lauwagie T, Sol H, Roebben G, Heylen W, Shi YM, Van der Biest O (2003) Mixed numerical-experimental identification of elastic properties of orthotropic metal plates. Ndt&E Int 36:487–495. https://doi.org/10.1016/j.jsv.2006.01.054CrossRef

Lauwagie T, Sol H, Heylen W, Roebben G (2004) Determination of the in-plane elastic properties of the different layers of laminated plates by means of vibration testing and model updating. J Sound Vib 274:529–546. https://doi.org/10.1016/j.jsv.2003.05.023CrossRef

Lee IW, Jung GH (1997) An efficient algebraic method for the computation of natural frequency and mode shape sensitivities. 1. Distinct natural frequencies. Comput Struct 62:429–435. https://doi.org/10.1016/S0045-7949(96)00206-4CrossRefMATH

Lee CR, Kam TY (2006a) Identification of mechanical properties of elastically restrained laminated composite plates using vibration data. J Sound Vib 295:999–1016. https://doi.org/10.1016/j.jsv.2006.01.054CrossRef

Lee CR, Kam TY (2006b) System identification of partially restrained composite plates using measured natural frequencies. J Eng Mech 132:841–850. https://doi.org/10.1061/(ASCE)0733-9399(2006)132:8(841)CrossRef

Lee CR, Kam TY, Sun SJ (2007) Free-vibration analysis and material constants identification of laminated composite sandwich plates. J Eng Mech 133:874–886. https://doi.org/10.1061/(ASCE)0733-9399(2007)133:8(874)CrossRef

Li N, Ben Tahar M, Aboura Z, Khellil K (2016) A dynamic analysis approach for identifying the elastic properties of unstitched and stitched composite plates. Compos Struct 152:959–968. https://doi.org/10.1016/j.compstruct.2016.06.038CrossRef

Longo R, Delaunay T, Laux D, El Mouridi M, Arnould O, Le Clezio E (2012) Wood elastic characterization from a single sample by resonant ultrasound spectroscopy. Ultrasonics 52:971–974. https://doi.org/10.1016/j.ultras.2012.08.006CrossRef

Longo R, Laux D, Pagano S, Delaunay T, Le Clezio E, Arnould O (2018) Elastic characterization of wood by resonant ultrasound spectroscopy (RUS): a comprehensive study. Wood Sci Technol 52:383–402. https://doi.org/10.1007/s00226-017-0980-zCrossRef

Ma CC, Lin CC (1999) Inverse evaluation of material constants for composite plates by optical interferometry method AIAA J 37:947–953 https://doi.org/10.2514/2.815

Maletta C, Pagnotta L (2004) On the determination of mechanical properties of composite laminates using genetic algorithms. Int J Mech Mater Des 1:199–211. https://doi.org/10.1007/s10999-004-1731-5CrossRef

Matter M, Gmur T, Cugnoni J, Schorderet A (2007) Improved modal characterization of the constitutive parameters in multilayered plates. Compos Sci Technol 67:1121–1131. https://doi.org/10.1016/j.compscitech.2006.05.016CrossRef

Matter M, Gmur T, Cugnoni J, Schorderet A (2009) Numerical-experimental identification of the elastic and damping properties in composite plates. Compos Struct 90:180–187. https://doi.org/10.1016/j.compstruct.2009.03.001CrossRef

Matter M, Gmur T, Cugnoni J, Schorderet A (2011) Identification of the elastic and damping properties in sandwich structures with a low core-to-skin stiffness ratio. Compos Struct 93:331–341. https://doi.org/10.1016/j.compstruct.2010.09.009CrossRef

McCann DM, Forde MC (2001) Review of NDT methods in the assessment of concrete and masonry structures Ndt&E Int 34:71–84 https://doi.org/10.1016/S0963-8695(00)00032-3

Meruane V (2013) Model updating using antiresonant frequencies identified from transmissibility functions. J Sound Vib 332:807–820. https://doi.org/10.1016/j.jsv.2012.10.021CrossRef

Meruane V, Heylen W (2011a) An hybrid real genetic algorithm to detect structural damage using modal properties. Mech Syst Signal Pr 25:1559–1573. https://doi.org/10.1016/j.ymssp.2010.11.020CrossRef

Meruane V, Heylen W (2011b) Structural damage assessment with antiresonances versus mode shapes using parallel genetic algorithms. Struct Control Health Monit 18:825–839. https://doi.org/10.1002/stc.401CrossRef

Mishra AK, Chakraborty S (2015a) Determination of material parameters of FRP plates with rotational flexibility at boundaries using experimental modal testing and model updating. Exp Mech 55:803–815. https://doi.org/10.1007/s11340-014-9981-0CrossRef

Mishra AK, Chakraborty S (2015b) Development of a finite element model updating technique for estimation of constituent level elastic parameters of FRP plates. Appl Math Comput 258:84–94. https://doi.org/10.1016/j.amc.2015.02.003MathSciNetCrossRefMATH

Missoum S, Lacaze S, Amabili M, Alijani F (2017) Identification of material properties of composite sandwich panels under geometric uncertainty. Compos Struct 179:695–704. https://doi.org/10.1016/j.compstruct.2017.07.020CrossRef

Moon FC (1973) A critical survey of wave propagation and impact in composite materials. NASA-CR-121226, Princeton University

Morris MD (1991) Factorial sampling plans for preliminary computational experiments. Technometrics 33:161–174. https://doi.org/10.2307/1269043CrossRef

Mottershead JE, Link M, Friswell MI (2011) The sensitivity method in finite element model updating: a tutorial. Mech Syst Signal Pr 25:2275–2296. https://doi.org/10.1016/j.ymssp.2010.10.012CrossRef

Pagnotta L (2008) Recent progress in identification methods for the elastic characterization of materials. Int J Mech 2:129–140

Pagnotta L, Stigliano G (2008) Elastic characterization of isotropic plates of any shape via dynamic tests: theoretical aspects and numerical simulations. Mech Res Commun 35:351–360. https://doi.org/10.1016/j.mechrescom.2008.03.008CrossRefMATH

Pagnotta L, Stigliano G (2009) Elastic characterization of isotropic plates of any shape via dynamic tests: practical aspects and experimental applications. Mech Res Commun 36:154–161. https://doi.org/10.1016/j.mechrescom.2008.09.003CrossRefMATH

Papalambros PY, Wilde DJ (2017) Principles of optimal design: modeling and computation, Third edn. Cambridge University Press, Cambridge, UKCrossRef

Papazoglou VJ, Tsouvalis NG, Lazaridis AG (1996) A non-destructive evaluation of the material properties of a composite laminated plate. Appl Compos Mater 3:321–334. https://doi.org/10.1007/Bf00134974CrossRef

Pedersen P, Frederiksen PS (1992) Identification of orthotropic material moduli by a combined experimental/numerical method. Measurement 10:113–118. https://doi.org/10.1016/0263-2241(92)90003-MCrossRef

Perez RE, Jansen PW, Martins JRRA (2012) pyOpt: a python-based object-oriented framework for nonlinear constrained optimization. Struct Multidiscip O 45:101–118. https://doi.org/10.1007/s00158-011-0666-3MathSciNetCrossRefMATH

Petrone G, Meruane V (2017) Mechanical properties updating of a non-uniform natural fibre composite panel by means of a parallel genetic algorithm. Compos A: Appl Sci Manuf 94:226–233. https://doi.org/10.1016/j.compositesa.2016.12.017CrossRef

Ragauskas P, Belevičius R (2009) Identification of material properties of composite materials. Aviation 13:109–115. https://doi.org/10.3846/1648-7788.2009.13.109-115CrossRef

Rao SS (2009) Engineering optimization: theory and practice, Fourth edn. John Wiley & Sons, New Jersey, USACrossRef

Rebillat M, Boutillon X (2011) Measurement of relevant elastic and damping material properties in sandwich thick plates. J Sound Vib 330:6098–6121. https://doi.org/10.1016/j.jsv.2011.07.015CrossRef

Reddy JN (2004) Mechanics of laminated composite plates and shells: theory and analysis, Second edn. CRC Press, Taylor & Francis Group, Boca Raton, FLCrossRef

Rikards R, Chate A, Steinchen W, Kessler A, Bledzki AK (1999) Method for identification of elastic properties of laminates based on experiment design. Compos Part B: Eng 30:279–289. https://doi.org/10.1016/S1359-8368(98)00059-6CrossRef

Rikards R, Chate A, Gailis G (2001) Identification of elastic properties of laminates based on experiment design. Int J Solids Struct 38:5097–5115. https://doi.org/10.1016/S0020-7683(00)00349-8CrossRefMATH

Rikards R, Abramovich H, Green T, Auzins J, Chate A (2003) Identification of elastic properties of composite laminates. Mech Adv Mater Struct 10:335–352. https://doi.org/10.1080/15376490390231827CrossRef

Rouffaud R, Hladky-Hennion AC, Levassort F (2017) A combined genetic algorithm and finite element method for the determination of a practical elasto-electric set for 1-3 piezocomposite phases. Ultrasonics 77:214–223. https://doi.org/10.1016/j.ultras.2017.02.015CrossRef

Roylance D (2000) Laminated composite plates. John Wiley & Sons, MA, USA

Saito A, Nishikawa Y, Yamasaki S, Fujita K, Kawamoto A, Kuroishi M, Nakai H (2016) Equivalent orthotropic elastic moduli identification method for laminated electrical steel sheets. Mech Syst Signal Pr 72-73:607–628. https://doi.org/10.1016/j.ymssp.2015.10.027CrossRef

Schröder K, Grove S, Tsiapoki S, Gebhardt CG, Rolfes R (2018) Structural change identification at a wind turbine blade using model updating. J Phys Conf Ser 1104:012030. https://doi.org/10.1088/1742-6596/1104/1/012030CrossRef

Schwaar M, Gmur T, Frieden J (2012) Modal numerical-experimental identification method for characterising the elastic and damping properties in sandwich structures with a relatively stiff core. Compos Struct 94:2227–2236. https://doi.org/10.1016/j.compstruct.2012.02.017CrossRef

Schwarz BJ, Richardson MH experimental modal analysis. In: Proceedings of the CSI Reliability Week, Orlando, FL, October 1999

Senov A2018. Projective approximation based quasi-Newton methods. In, Cham, Machine learning, optimization, and big data. Springer International Publishing, pp 29–40

Setiawan R, Syngellakis S, Hill M (2009) A metamodeling approach to mechanical characterization of anisotropic plates. J Compos Mater 43:2333–2349. https://doi.org/10.1177/0021998308099008CrossRef

Shun-Fa H, Jen-Chih W, Rong-Song H (2017) A gradient taguchi method for engineering optimization. IOP Conf Ser: Mater Sci Eng 241:012022CrossRef

Silva MFT, Borges LMSA, Rochinha FA, de Carvalho LAV (2004) A genetic algorithm applied to composite elastic parameters identification. Inverse Problems in Science and Engineering 12:17–28. https://doi.org/10.1080/1068276031000097992CrossRef

Soares CMM, Defreitas MM, Araujo AL, Pedersen P (1993) Identification of material properties of composite plate specimens. Compos Struct 25:277–285. https://doi.org/10.1016/0263-8223(93)90174-OCrossRef

Sol H, Hua H, De Visscher J, Vantomme J, De Wilde WP (1997) A mixed numerical/experimental technique for the nondestructive identification of the stiffness properties of fibre reinforced composite materials. Ndt&E Int 30:85–91. https://doi.org/10.1016/S0963-8695(96)00049-7CrossRef

Swan CC, Arora JS (1997) Topology design of material layout in structured composites of high stiffness and strength. Structural Optimization 13:45–59. https://doi.org/10.1007/bf01198375CrossRef

Tam JH, Ong ZC, Ismail Z, Ang BC, Khoo SY (2017) Identification of material properties of composite materials using nondestructive vibrational evaluation approaches: a review. Mech Adv Mater Struct 24:971–986. https://doi.org/10.1080/15376494.2016.1196798CrossRef

Tam JH, Ong ZC, Ismail Z, Ang BC, Khoo SY (2018a) Identification of material properties of orthotropic composite plate using experimental frequency response function data. AIP Conference Proceedings 1958:020030. https://doi.org/10.1063/1.5034561CrossRef

Tam JH, Ong ZC, Ismail Z, Ang BC, Khoo SY (2018b) Inverse identification of composite material properties by using a two-stage Fourier method. Exp Mech 58:963–981. https://doi.org/10.1007/s11340-018-0396-1CrossRef

Tam JH, Ong ZC, Ismail Z, Ang BC, Khoo SY, Li WL (2018c) Inverse identification of elastic properties of composite materials using hybrid GA-ACO-PSO algorithm. Inverse Problems Sci Eng 26:1432–1463. https://doi.org/10.1080/17415977.2017.1411911MathSciNetCrossRefMATH

Tam JH, Ong ZC, Ho KW (2019a) Composite material identification using a two-stage meta-heuristic hybrid approach incorporated with a two-level FRF selection scheme. J Sound Vib 456:407–430. https://doi.org/10.1016/j.jsv.2019.05.033CrossRef

Tam JH, Ong ZC, Ismail Z, Ang BC, Khoo SY (2019b) A new hybrid GA−ACO−PSO algorithm for solving various engineering design problems. Int J Comput Math 96:883–919. https://doi.org/10.1080/00207160.2018.1463438MathSciNetCrossRef

Tam JH, Ong ZC, Lau CL, Ismail Z, Ang BC, Khoo SY (2019c) Identification of material properties of composite plates using Fourier-generated frequency response functions. Mech Adv Mater Struct 26:119–128. https://doi.org/10.1080/15376494.2017.1365980CrossRef

Ursin B (1983) Review of elastic and electromagnetic-wave propagation in horizontally layered media. Geophysics 48:1063–1081. https://doi.org/10.1190/1.1441529CrossRef

Venter G (2010) Review of optimization techniques. In. https://doi.org/10.1002/9780470686652.eae495

Viala R, Placet V, Cogan S (2018) Identification of the anisotropic elastic and damping properties of complex shape composite parts using an inverse method based on finite element model updating and 3D velocity fields measurements (FEMU-3DVF): application to bio-based composite violin soundboards Composites Part A. Appl Sci Manuf 106:91–103. https://doi.org/10.1016/j.compositesa.2017.12.018CrossRef

Zuo W, Huang K, Bai J, Guo G (2017) Sensitivity reanalysis of vibration problem using combined approximations method. Struct Multidiscip O 55:1399–1405. https://doi.org/10.1007/s00158-016-1586-zMathSciNetCrossRef

Title: Identification of elastic properties utilizing non-destructive vibrational evaluation methods with emphasis on definition of objective functions: a review
Author: Jun Hui Tam
Publication date: 06-01-2020
Publisher: Springer Berlin Heidelberg
Published in: Structural and Multidisciplinary Optimization / Issue 4/2020
Print ISSN: 1615-147X
Electronic ISSN: 1615-1488
DOI: https://doi.org/10.1007/s00158-019-02433-1

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 4/2020

Coiling and deploying dynamic optimization of a C-cross section thin-walled composite deployable boom

Hole seeding in level set topology optimization via density fields

Level set topology optimization of cooling channels using the Darcy flow model

A method to efficiently localize non-dominated regions using surrogate modeling with multi-fidelity data from a sequential decision process

Scalable gradient–enhanced artificial neural networks for airfoil shape design in the subsonic and transonic regimes

Toward the robust establishment of variable-fidelity surrogate models for hierarchical stiffened shells by two-step adaptive updating approach

Premium Partners