Top

Published in:

2020 | OriginalPaper | Chapter

Influence of Alloying Compositions on the Properties of Nickel-Based Superalloys: A Review

Authors : Dileep Kumar Ganji, G. Rajyalakshmi

Published in: Recent Advances in Mechanical Engineering

Publisher: Springer Singapore

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Superalloys were initially intended to take care of the demand in the materials execution prerequisites of space vehicles, turbo chargers, supplies of heat treatments, turbine motors of aircrafts and numerous others. Among the iron, nickel and cobalt-based superalloys, Ni as primary constituent is gaining lot of significance because of the presence of good mechanical properties including oxidation resistance at high temperatures, and also resistance to creep with precipitation strengthening. Nickel-based alloys also offer repetitivity to strengthen the phases either by solid solutioning or by hardening precipitated phase which enhances strength at peak temperatures. Also, the nature of solid solutions, pressures and environments, phase stability at different temperatures, grain shape, size and distribution are the important parameters for the study of superalloys based on nickel. The performance of these will largely depend on the composition of the elements used for alloying. To impart all the required characteristics for a particular application, alloying elements should be considered in appropriate proportions. With this review, future research endeavour might focus on the modelling and development of nickel-based superalloys for high-temperature applications along with the characterization studies of these superalloys with optimum composition of the constituent elements for better performance.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

previous chapter The Machining Characteristics of the Al7075-B4C Nanocomposites Developed Using Ultrasonic Liquid Processor

next chapter Patient Pulse Rate Monitoring System Using LabVIEW

Nowotnik A (2016) Nickel-based superalloys. Reference module in materials science and materials engineering. https://doi.org/10.1016/b978-0-12-803581-8.02574-1

Donachie MJ, Donachie SJ (2002) Superalloys. A technical guide, 2nd edn. ASM International, Cleveland

Nunes R UFRGS, Adams JH Eagle-Picher Industries, Inc., Ammons M Martin Marietta Energy Systems (1990) Metals handbook, vol 2, 10th edn. ASM International, Cleveland

Singh S (2016) Super alloys technical report. ResearchGate Publications. https://doi.org/10.13140/rg.2.1.2385.0009

Palakudtewar RK, Gaikwad SV (2014) Dry machining of superalloys: difficulties and remedies. Int J Sci Res 3(7):277–282

Reed RC, Rae CMF (2014) Physical metallurgy of the nickel-based superalloys. In: Physical metallurgy, 5th edn. pp 2215–2290. https://doi.org/10.1016/b978-0-444-53770-6.00022-8

Sims CT, Stoloff NS, Hagel WC (1987) Superalloys II: high-temperature materials for aerospace and industrial power. Wiley, Hoboken

Appa Rao G, Kumar M, Srinivas M, Sarma DS (2003) Effect of standard heat treatment on the microstructure and mechanical properties of hot isostatically pressed superalloy Inconel 718. Mater Sci Eng A 355(1–2):114–125. https://doi.org/10.1016/s0921-5093(03)00079-0

Monajati H, Jahazi M, Bahrami R, Yue S (2004) The influence of heat treatment conditions on γ′ characteristics in Udimet 720. Mater Sci Eng A 373(1–2):286–293. https://doi.org/10.1016/j.msea.2004.01.027CrossRef

10.

Zhang ZJ, Zhang P, Li L, Zhang ZF (2012) Fatigue cracking at twin boundaries: effects of crystallographic orientation and stacking fault energy. Acta Mater 60:3113–3127. https://doi.org/10.1016/j.actamat.2012.02.016

11.

Fedelich B, Epishin A, Link T (2012) Rafting during high temperature deformation in a single crystal superalloy: experiments and modeling. Superalloys. https://doi.org/10.1002/9781118516430.ch54CrossRef

12.

Chen Z (2014) Surface integrity of broached Inconel 718 and influence of thermal exposure. Linköping studies in science and technology thesis no. 1676

13.

Thellaputta GR, Chandra PS, Rao CSP (2017) Machinability of nickel based superalloys: a review. Mater Today Proc 3712–3721. https://doi.org/10.1016/j.matpr.2017.02.266

14.

Goward GW (1998) Progress in coatings for gas turbine airfoils. Surf Coat Technol 108–109. https://doi.org/10.1016/s0257-8972(98)00667-7

15.

Stringer J (2016) High temperature corrosion of superalloys. Mater Sci Technol 3(7):482–493. https://doi.org/10.1080/02670836.1987.11782259CrossRef

16.

Rapp RA (1986) Chemistry and electrochemistry of the hot corrosion of metals. Whitney award lecture, pp 568–577. https://doi.org/10.5006/1.3583026

17.

Satyanarayana DVV, Eswara Prasad N (2016) Nickel-based superalloys. In: Aerospace materials and material technologies. Springer, Berlin, pp 199–228

18.

Pollock TM, Field RD (2002) Dislocations and high temperature plastic deformation of superalloy single crystals. In: Dislocations in solids, vol 11, pp 547–618. https://doi.org/10.1016/s1572-4859(02)80014-6

19.

Reed RC (2006) The superalloys—fundamentals and applications, 1st edn. Cambridge University Press, Cambridge

20.

Sarosi PM, Wang B, Simmons JP, Wang Y, Mills MJ (2007) Formation of multimodal size distributions of γ′ in a nickel-base superalloy during interrupted continuous cooling. Scripta Mater 57(8):767–770. https://doi.org/10.1016/j.scriptamat.2007.06.014CrossRef

21.

Aba-Perea PE, Pirling T, Withers PJ, Kelleher J, Kabra S, Preuss M (2016) Determination of the high temperature elastic properties and diffraction elastic constants of Ni-base superalloys. Mater Des 89:856–863. https://doi.org/10.1016/j.matdes.2015.09.152CrossRef

22.

Benghersallah M, Boulanouar L, Lecoz G, Dudzinski D (2003) Dry high speed milling of nickel-based superalloy. Mechanika 19(2):223–228. https://doi.org/10.5755/j01.mech.19.2.4149CrossRef

23.

Kirka M (2014) Thermomechanical behavior of a directionally solidified nickel-base superalloys in the aged state. Georgia Tech theses and dissertations, Georgia Institute of Technology

24.

Matsuo T, Ueki M, Takeyama M, Tanaka R (1987) Strengthening if nickel base superalloys for nuclear heat exchanger application. J Mater Sci 22:1901–1907. https://doi.org/10.1007/BF01132914CrossRef

25.

Ko HS, Paik KW, Park LJ, Kim YG, Tundermann JH (1998) Influence of rhenium on the microstructures and mechanical properties of a mechanically alloyed oxide dispersion-strengthened nickel base superalloy. J Mater Sci 33(13):3361–3370. https://doi.org/10.1023/A:1013293515482CrossRef

26.

Lin YC, Li L, He D-G, Chen M-S, Liu GQ (2017) Effects of pre-treatments on mechanical properties and fracture mechanism of a nickel-based superalloy. Mater Sci Eng A 679:401–409. https://doi.org/10.1016/j.msea.2016.10.058

27.

Jiang T, Chen LB, Jiang F, Chai HP, Sun J (2016) Microstructural evolution and mechanical properties of a nickel-based superalloy through long-term service. Mater Sci Eng A 656. https://doi.org/10.1016/j.msea.2016.01.037

28.

Long Z, Liu X, Yang W, Chang KM, Barbero E (2004) Thermodynamic assessment of liquid composition change during solidification and its effect on freckle formation in superalloys. Mater Sci Eng A 386:254–261. https://doi.org/10.1016/j.msea.2004.07.038CrossRef

29.

Chapman L (2004) Applications of high temperature DSC technique to nickel based superalloys. J Mater Sci 39(24):7229–7236. https://doi.org/10.1023/B:JMSC.0000048736.86794.12CrossRef

30.

Sato A, Moverare JJ, Hasselqvist M, Reed RC (2012) On the mechanical behavior of a new single crystal superalloy for industrial gas turbine applications. Metall Mater Trans 43(7):2302–2315. https://doi.org/10.1007/s11661-011-0995-2CrossRef

31.

Reed RC, Tao T, Warnken N (2009) Alloys-by-design: application to nickel-based single crystal superalloys. Acta Mater 57(19):5898–5913. https://doi.org/10.1016/j.actamat.2009.08.018CrossRef

32.

Zao X, Dang Y, Yin H, Lu J (2016) Effect of heat treatment on the microstructure of a Ni–Fe based superalloy for advanced ultra-supercritical power plant applications. Prog Nat Sci Mater Int 26(2):204–209. https://doi.org/10.1016/j.pnsc.2016.03.013CrossRef

33.

Clemens ML, Price A, Bellows RS (2003) Advanced solidification processing of an industrial gas turbine engine component. JOM 27–31. https://doi.org/10.1007/s11837-003-0156-1

34.

Bhadeshia HKDH (1997) Recrystallisation of practical mechanically alloyed iron-base and nickel-base superalloys. Mater Sci Eng A 223(1–2):64–77. https://doi.org/10.1016/S0921-5093(96)10507-4CrossRef

35.

Dye D, Roder BA, Tin S, Rist MA, James JA, Daymond MR (2004) Modeling and measurement of residual stresses in a forged IN718 superalloy disc. Superalloys. TMS (The Minerals, Metals & Materials Society) 315–322. https://doi.org/10.7449/2004/superalloys_2004_315_322

36.

Das N (2010) Advances in nickel-based cast superalloys. Trans Indian Inst Met 63:265–274. https://doi.org/10.1007/s12666-010-0036-7CrossRef

37.

Ulutan D, Ozel T (2010) Machining induced surface integrity in titanium and nickel alloys: a review. Int J Mach Tools Manuf 250–280. https://doi.org/10.1016/j.ijmachtools.2010.11.003

38.

Miller S (1996) Advanced materials means advanced engines. Interdisc Sci Rev 21(2):117–129. https://doi.org/10.1179/isr.1996.21.2.117CrossRef

39.

Ezugwu EO, Bonney J, Yamane Y (2003) An overview of the machinability of aero engine alloys. J Mater Process Technol 134(2):233–253. https://doi.org/10.1016/S0924-0136(02)01042-7CrossRef

40.

Pervaiz S, Rashid A, Deiab I, Nicolescu M (2014) Influence of tool materials on machinability of titanium- and nickel-based alloys: a review. Mater J Mater Manuf Process 29(3):219–252. https://doi.org/10.1080/10426914.2014.880460CrossRef

41.

Ezugwu EO (2005) Key improvements in the machining of difficult-to-cut aerospace superalloys. Int J Mach Tools Manuf 45:1353–1367. https://doi.org/10.1016/j.ijmachtools.2005.02.003CrossRef

42.

M’Saoubi R, Axinte D, Soo SL, Nobel C, Attia H, Kappmeyer G, Engin S, Sim WM (2015) High performance cutting of advanced aerospace alloys and composite materials. CIRP Ann 64(2):557–580. https://doi.org/10.1016/j.cirp.2015.05.002

43.

M’Saoubi R, Outeiro JC, Chandrasekaran H, Dillon OW Jr, Jawahir IS (2008) A review of surface integrity in machining and its impact on functional performance and life of machined products. Int J Sustain Manuf 1:203–236. https://doi.org/10.1504/IJSM.2008.019234CrossRef

44.

Guo YB, Li W, Jawahir IS (2009) Surface integrity characterization and prediction in machining of hardened and difficult-to-machine alloys; a state-of-the-art research review and analysis. Mach Sci Technol 13(4):437–470. https://doi.org/10.1080/10910340903454922CrossRef

45.

Wu Q (2007) Serrated chip formation and tool-edge wear in high-speed machining of advanced aerospace materials. Utah State University

46.

Li ZY, Wei XT, Guo YB, Sealy MP (2015) State-of-art, challenges, and outlook on manufacturing of cooling holes for turbine blades. Mach Sci Technol 19(3):361–399. https://doi.org/10.1080/10910344.2015.1051543CrossRef

47.

Biermann D, Kersting P, Surmann T (2010) A general approach to simulating workpiece vibrations during five-axis milling of turbine blades. CIRP Ann 59(10):125–128. https://doi.org/10.1016/j.cirp.2010.03.057CrossRef

48.

Choudhury IA, El-Baradie MA (1998) Machinability of nickel base super alloys: a general review. J Mater Process Technol 77(1–3):278–284. https://doi.org/10.1016/S0924-0136(97)00429-9CrossRef

49.

Hood R, Soo SL, Aspinwall DK, Andrews P, Sage C (2011) Twist drilling of Haynes 282 superalloy. Procedia Eng 19:150–155. https://doi.org/10.1016/j.proeng.2011.11.094CrossRef

50.

Pollock T, Tin S (2006) Nickel-based superalloys for advanced turbine engines: chemistry, microstructure and properties. J Propul Power 22(2):361–374. https://doi.org/10.2514/1.18239CrossRef

51.

Chen Z, Peng RL, Avdovic P, Moverare J, Karlsson F, Zhou JM, Johansson S (2014) Analysis of thermal effect on the residual stresses of broached Inconel 718. Adv Mater Res 966:574–579. https://doi.org/10.4028/www.scientific.net/AMR.996.574

52.

Thakur A, Gangopadhyay S (2016) State-of-the-art in surface integrity in machining of nickel-based super alloys. Int J Mach Tools Manuf 100:25–54. https://doi.org/10.1016/j.ijmachtools.2015.10.001

53.

Huang W, Li S, Yang X, Shi D, Qi H (2018) Experimental investigation and modelling of microstructure degradation in a DS Ni-based superalloy using a quantitative cross-correlation analysis method. J Alloy Compd 762:488–499. https://doi.org/10.1016/j.jallcom.2018.05.131CrossRef

54.

Neumeier S, Pyczak F, Goken M (2011) Influence of rhenium and ruthenium on the local mechanical properties of the γ and γ′ phase in nickel-base superalloys. Philos Mag A 91(33):1–13. https://doi.org/10.1080/14786435.2011.607139CrossRef

55.

Zhong Z, Gu Y, Yuan Y, Yokokawa T, Harada H (2012) Mechanical properties and fracture modes of an advanced Ni–Co-base disk superalloy at elevated temperatures. Mater Charact 67:101–111. https://doi.org/10.1016/j.matchar.2012.02.021CrossRef

56.

Chang L, Jin H, Sun W (2015) Solidification behavior of Ni-base superalloy udimet 720Li. J Alloy Compd 653:266–270. https://doi.org/10.1016/j.jallcom.2015.09.001CrossRef

57.

Rist MA, James JA, Tin S, Roder BA, Daymond MR (2006) Residual stresses in a quenched superalloy turbine disc: measurements and modeling. Metall Mater Trans A 37(2):459–467. https://doi.org/10.1007/s11661-006-0017-yCrossRef

58.

Yang ZG, Stevenson JW, Paxton DM, Singh P, Weil KS (2002) Materials properties database for selection of high-temperature alloys and concepts of alloy design for SOFC applications. Pacific Northwest National Laboratory Richland, WashingtonCrossRef

59.

Furrer DU, Shankar R, White C (2003) Optimizing the heat treatment of Ni-based superalloy turbine discs. JOM 55(3):32–34. https://doi.org/10.1007/s11837-003-0157-0CrossRef

Title: Influence of Alloying Compositions on the Properties of Nickel-Based Superalloys: A Review
Authors: Dileep Kumar Ganji
G. Rajyalakshmi
Publisher: Springer Singapore
Book: Recent Advances in Mechanical Engineering
Print ISBN: 978-981-15-1070-0

Electronic ISBN: 978-981-15-1071-7

Copyright Year: 2020
DOI: https://doi.org/10.1007/978-981-15-1071-7_44

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partners