Top

Production Engineering

Published in:

23-09-2016 | Tooling

Influence of heat pipe cooling on the wear of hot forging dies

Authors: Bernd-Arno Behrens, Jan Puppa, Adis Huskic, Kai Brunotte, Anas Bouguecha, Tobias Prüß

Published in: Production Engineering | Issue 6/2016

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The temperature of hot forging dies has a high influence on the wear of tool surfaces. In order to reduce the thermal impact on tool life, passively acting heat pipes are tested and the results are presented within this paper. For this purpose, the upper die of a commonly used hot forging tool was equipped with heat pipes and serial forging trials have been performed. The influence of the heat pipes on the die temperature as well as the effects on wear behavior are presented. The heat pipe cooling leads to a lower die temperature and thus to a reduction of adhesive wear. The wear is examined by optical and tactile measurements as well as by micrograph analyses. Conclusively, hardness tests of the tool edge layer are carried out.

previous article Preform optimization for hot forging processes using an adaptive amount of flash based on the cross section shape complexity

next article Discrete lot-sizing and scheduling problems considering renewable energy and CO2 emissions

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Gronostajski Z, Kaszuba M, Polak S, Zwierzchowski M, Niechajowicz A, Hawryluk M (2016) The failure mechanisms of hot forging dies. Mater Sci Eng A 657:147–160CrossRef

Alimi A, Fajoui J, Kchaou M, Branchu S, Elleuch R, Jacquemin F (2016) Multi-scale hot working tool damage (X40CrMoV5-1) analysis in relation to the forging process. Eng Fail Anal 62:142–155CrossRef

Xu W, Li W, Wang Y (2015) Experimental and theoretical analysis of wear mechanism in hot-forging die and optimal design of die geometry. Wear 318:78–88CrossRef

Behrens BA, Prüß T (2015) Alternative temperature control of closed forging dies using heat pipes. Key Eng Mater, Vol 651–653, Trans Tech Publications, Switzerland, pp 311–316

Puppa J, Behrens BA (2015) Optimization of cooling and lubrication for nitrided and ceramic-coated hot forging dies. Appl Mech Mater, Vol 794, Trans Tech Publications, Switzerland, pp 97–104

Chang Y-W, Cheng C-H, Wang J-C, Chen S-L (2008) Heat pipe for cooling of electronic equipment. Energy Convers Manag 49:3398–3404CrossRef

Meseguer J, Pérez-Grande I, Sanz-Andrés A (2012) Spacecraft thermal control. Woodhead Publishing, CambridgeCrossRef

Vasiliev LL (2005) Heat pipes in modern heat exchangers. Appl Therm Eng 25:1–19MathSciNetCrossRef

Yang X, Yan YY, Mullen D (2012) Recent developments of lightweight, high performance heat pipes. Appl Therm Eng 33–34:1–14CrossRef

10.

Zohuri B (2011) Heat pipe design and technology a practical approach. CRC Press, Taylor & Francis Group, LondonCrossRef

11.

De Kerpel K, De Schampheleire S, Steuperaert H, De Jaeger P, De Paepe M (2016) Experimental study of the effect of felt wick porosity on capillary driven heat pipes. Appl Therm Eng 96:690–698CrossRef

12.

Paschke H, Yilkiran T, Lippold L, Brunotte K, Weber M, Brauer G, Behrens B-A (2015) Adapted surface properties of hot forging tools using plasma technology for an effective wear reduction. Wear 330–331:429–438CrossRef

13.

Cho D-H, Lee S-A, Lee Y-Z (2012) Mechanical properties and wear behavior of the white layer. Tribol Lett 45:123–129MathSciNetCrossRef

Title: Influence of heat pipe cooling on the wear of hot forging dies
Authors: Bernd-Arno Behrens
Jan Puppa
Adis Huskic
Kai Brunotte
Anas Bouguecha
Tobias Prüß
Publication date: 23-09-2016
Publisher: Springer Berlin Heidelberg
Published in: Production Engineering / Issue 6/2016
Print ISSN: 0944-6524
Electronic ISSN: 1863-7353
DOI: https://doi.org/10.1007/s11740-016-0698-z

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 6/2016

Dynamic facility layout problem under competitive environment: a new formulation and some meta-heuristic solution methods

Discrete lot-sizing and scheduling problems considering renewable energy and CO2 emissions

Application potential of coarse-grained diamond grinding wheels for precision grinding of optical materials

Improvement of seizure resistance by roughening surface of stainless steel drawn cup in ironing using die having lubricant pockets

Preform optimization for hot forging processes using an adaptive amount of flash based on the cross section shape complexity

Analysis of the fluid pressure, load capacity, and coefficient of friction of an elliptic machine hammer peened surface structure in hydrodynamic lubrication

Premium Partners