Skip to main content
Top
Published in: Metallurgical and Materials Transactions A 5/2019

25-02-2019

Influence of Ir Additions and Icosahedral Short Range Order (ISRO) on Nucleation and Growth Kinetics in Au-20.5Wt Pct Cu-4.5Wt PctAg Alloy

Authors: J. Zollinger, B. Rouat, J. Guyon, S. K. Pillai, M. Rappaz

Published in: Metallurgical and Materials Transactions A | Issue 5/2019

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Based on detailed EBSD analyses, Kurtuldu et al. (Acta Mater. 70:240–248, 2014) have explained the grain refinement of Au-12.5 wt pctCu-12.5 wt pctAg (yellow gold) by the addition of minute amounts of Ir in terms of “icosahedral quasicrystal (iQC)-mediated nucleation”, i.e., Ir induced the formation of Icosahedral short range order (ISRO) of atoms in the liquid, leading to the formation of iQC on which the fcc-phase forms. In the present contribution, we show that: (i) this mechanism is also responsible of the grain refinement in Au-20.5 wt pctCu-4.5 wt pctAg (pink gold) with Ir addition; (ii) ISRO also influences the morphology and growth kinetics of the fcc phase: at solidification rate of a few mm/s, \(\langle 100\rangle \) dendrites are replaced by a cellular-type morphology growing along \(\langle 111\rangle \) when 100 wt ppm of Ir is added to the melt; (iii) iQC-mediated nucleation is accompanied by a spinodal decomposition of the liquid, which is revealed at high cooling rate by the formation of Cu-rich particles or dendrites, some of them being also twinned, in parallel to iQC-mediated grain refinement and twin formation.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference G. Kurtuldu, A. Sicco, and M. Rappaz: Acta Mater., 2014, vol. 70, pp. 240–48.CrossRef G. Kurtuldu, A. Sicco, and M. Rappaz: Acta Mater., 2014, vol. 70, pp. 240–48.CrossRef
2.
go back to reference G. Kurtuldu, P. Jarry, and M. Rappaz: Acta Mater., 2013, vol. 61(19), pp. 7098–108.CrossRef G. Kurtuldu, P. Jarry, and M. Rappaz: Acta Mater., 2013, vol. 61(19), pp. 7098–108.CrossRef
3.
4.
go back to reference M. Rappaz and G. Kurtuldu: J.P.E.D., 2016, vol. 37(1, SI), pp. 2–3. M. Rappaz and G. Kurtuldu: J.P.E.D., 2016, vol. 37(1, SI), pp. 2–3.
5.
go back to reference N. Nakayama, K. Tanaka, S. Matsukawa, K. Deguchi, K. Imura, T. Ishimasa, and N.K. Sato: J. Phys. Soc. Jpn., 2015, vol. 84, art. id 024721. N. Nakayama, K. Tanaka, S. Matsukawa, K. Deguchi, K. Imura, T. Ishimasa, and N.K. Sato: J. Phys. Soc. Jpn., 2015, vol. 84, art. id 024721.
6.
go back to reference S. Matsukawa, K. Tanaka, N. Nakayama, K. Deguchi, K. Imura, H. Takakura, S. Kashimoto, T. Ishimasa, and N.K. Sato: J. Phys. Soc. Jpn., 2014, vol. 83, art. id 034705. S. Matsukawa, K. Tanaka, N. Nakayama, K. Deguchi, K. Imura, H. Takakura, S. Kashimoto, T. Ishimasa, and N.K. Sato: J. Phys. Soc. Jpn., 2014, vol. 83, art. id 034705.
7.
go back to reference Q. Lin and J.D. Corbett: J. Am. Chem. Soc., 2007, vol. 129, pp. 6789–97.CrossRef Q. Lin and J.D. Corbett: J. Am. Chem. Soc., 2007, vol. 129, pp. 6789–97.CrossRef
8.
go back to reference I. Karakaya and W.T. Thompson: Binary Alloy Phase Diagrams, II Ed., Ed. T.B. Massalski, 1990, vol. 1, pp. 49–50. I. Karakaya and W.T. Thompson: Binary Alloy Phase Diagrams, II Ed., Ed. T.B. Massalski, 1990, vol. 1, pp. 49–50.
10.
go back to reference E. Raub and E. Roeschel: Z. Metallkd., 1969, vol. 60, pp. 142–44. E. Raub and E. Roeschel: Z. Metallkd., 1969, vol. 60, pp. 142–44.
11.
go back to reference C.J. Essig: Manual for the Use of Dental Students, The S. S. White Dental Manufacturing Co., 1893. C.J. Essig: Manual for the Use of Dental Students, The S. S. White Dental Manufacturing Co., 1893.
12.
go back to reference J.P. Nielsen and J.J. Tuccillo: J. Dent. Res., 1966, vol. 45(3), pp. 964–69.CrossRef J.P. Nielsen and J.J. Tuccillo: J. Dent. Res., 1966, vol. 45(3), pp. 964–69.CrossRef
13.
14.
go back to reference G. Kurtuldu, P. Jarry, and M. Rappaz. Acta Mater., 2016, vol. 115, pp. 423–433.CrossRef G. Kurtuldu, P. Jarry, and M. Rappaz. Acta Mater., 2016, vol. 115, pp. 423–433.CrossRef
15.
go back to reference W. Hornfeck, R. Kobold, M. Kolbe, M. Conrad and D. Herlach: Nat. Commun., 2018, vol. 9, art. id 4054. W. Hornfeck, R. Kobold, M. Kolbe, M. Conrad and D. Herlach: Nat. Commun., 2018, vol. 9, art. id 4054.
16.
go back to reference S. Wang, D. Daloz, F. Bruneseaux, and G. Lesoult: IOP Conf. Ser. Mater. Sci. Eng., 2012, vol. 27, art. id 012064. S. Wang, D. Daloz, F. Bruneseaux, and G. Lesoult: IOP Conf. Ser. Mater. Sci. Eng., 2012, vol. 27, art. id 012064.
17.
go back to reference S. Wang: PhD thesis, Université de Lorraine, 2012. S. Wang: PhD thesis, Université de Lorraine, 2012.
18.
go back to reference G. Jeanmaire, M. Dehmas, A. Redjaiemia, S. Puech, and G. Fribourg: Mater. Char., 2014, vol. 98, pp. 193–201.CrossRef G. Jeanmaire, M. Dehmas, A. Redjaiemia, S. Puech, and G. Fribourg: Mater. Char., 2014, vol. 98, pp. 193–201.CrossRef
19.
go back to reference J.O. Andersson, T. Helander, L.H. Hoglund, P.F. Shi, and B. Sundman: Calphad, 2002, vol.26(2), pp. 273–312.CrossRef J.O. Andersson, T. Helander, L.H. Hoglund, P.F. Shi, and B. Sundman: Calphad, 2002, vol.26(2), pp. 273–312.CrossRef
20.
go back to reference B Sundman, S.G. Fries, and W.A. Oates: Calphad, 1998, vol. 22(3), pp. 335–54.CrossRef B Sundman, S.G. Fries, and W.A. Oates: Calphad, 1998, vol. 22(3), pp. 335–54.CrossRef
21.
go back to reference S. Hassam, J. Ågren, M. Gaune-Escard, and J.P. Bros. Metal. Trans. A, 1990, vol. 21, pp. 1877–84.CrossRef S. Hassam, J. Ågren, M. Gaune-Escard, and J.P. Bros. Metal. Trans. A, 1990, vol. 21, pp. 1877–84.CrossRef
22.
26.
go back to reference J.A. Dantzig and M. Rappaz: Solidification, 2nd ed., EPFL-Press, Lausanne, Switzerland, 2016. J.A. Dantzig and M. Rappaz: Solidification, 2nd ed., EPFL-Press, Lausanne, Switzerland, 2016.
27.
go back to reference L. Gránásy, T. Pusztai, J.A. Warren, J.F. Douglas, T. Börzsönyi, and V. Ferreiro: Nature Mater., 2003, vol. 2, pp. 92–96.CrossRef L. Gránásy, T. Pusztai, J.A. Warren, J.F. Douglas, T. Börzsönyi, and V. Ferreiro: Nature Mater., 2003, vol. 2, pp. 92–96.CrossRef
28.
go back to reference S. Henry, T. Minghetti, and M. Rappaz: Acta Mater., 1998, vol. 46, pp.6431–43.CrossRef S. Henry, T. Minghetti, and M. Rappaz: Acta Mater., 1998, vol. 46, pp.6431–43.CrossRef
29.
go back to reference G. Kurtuldu: PhD thesis, EPFL, Lausanne, 2014. G. Kurtuldu: PhD thesis, EPFL, Lausanne, 2014.
30.
go back to reference M. Bedel, G. Reinhart, A.-A. Bogno, C.-A. Gandin, S. Jacomet, E. Boller, H. Nguyen-Thi, and H. Henein: Acta Mater., 2015, vol. 89, pp. 234–246.CrossRef M. Bedel, G. Reinhart, A.-A. Bogno, C.-A. Gandin, S. Jacomet, E. Boller, H. Nguyen-Thi, and H. Henein: Acta Mater., 2015, vol. 89, pp. 234–246.CrossRef
31.
go back to reference J. Ding, M. Asta, and J.J. Hoyt: Frontiers in solidification, TMS Conference, Nashville, USA, 2016. Collection of extended abstracts, Eds W. Kurz et al, wilfried.kurz@epfl.ch. J. Ding, M. Asta, and J.J. Hoyt: Frontiers in solidification, TMS Conference, Nashville, USA, 2016. Collection of extended abstracts, Eds W. Kurz et al, wilfried.kurz@epfl.ch.
32.
go back to reference M. Lima and W. Kurz: . Metall. Mater. Trans. A, 2002, vol. 33A(8), pp. 2337–45.CrossRef M. Lima and W. Kurz: . Metall. Mater. Trans. A, 2002, vol. 33A(8), pp. 2337–45.CrossRef
33.
go back to reference I.L. Shabalin: Ultra-High Temperature Materials I, Springer, New York, 2014, pp. 609–49. I.L. Shabalin: Ultra-High Temperature Materials I, Springer, New York, 2014, pp. 609–49.
Metadata
Title
Influence of Ir Additions and Icosahedral Short Range Order (ISRO) on Nucleation and Growth Kinetics in Au-20.5Wt Pct Cu-4.5Wt PctAg Alloy
Authors
J. Zollinger
B. Rouat
J. Guyon
S. K. Pillai
M. Rappaz
Publication date
25-02-2019
Publisher
Springer US
Published in
Metallurgical and Materials Transactions A / Issue 5/2019
Print ISSN: 1073-5623
Electronic ISSN: 1543-1940
DOI
https://doi.org/10.1007/s11661-019-05176-2

Other articles of this Issue 5/2019

Metallurgical and Materials Transactions A 5/2019 Go to the issue

Premium Partners