Top

Journal of Materials Science

Published in:

25-06-2021 | Metals & corrosion

Influence of pre-recovery on the recrystallization of pure tantalum

Authors: J. Baton, W. Geslin, C. Moussa

Published in: Journal of Materials Science | Issue 27/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In order to study the influence of recovery, various pre-recovery treatments at different temperatures followed by a recrystallization treatment are performed on deformed microstructures of pure tantalum. Electron backscatter diffraction is used to characterize deformed and annealed microstructures. Analysis reveals that intergranular deformation strongly depends on the crystallographic orientation. In particular, dislocation content and development of dislocation substructures are the highest for γ-fiber grains. Subsequent recrystallization is affected by this orientation dependence: nucleation is favored in these grains and γ-fiber recrystallized grains are the largest. Pre-recovery affects recrystallization differently depending on initial plastic strain, temperature and time. For low- and moderately-deformed specimens, pre-recovery at low temperature or for short-time favors recrystallization due to more mobile subboundaries which enhance nucleation. Conversely, pre-recovery at high temperature or for long-time disfavors recrystallization due to the prevalence of stored energy decrease over the nucleation enhancement. Recovery is discussed on the basis of those two mechanisms. For highly deformed specimens, pre-recovery leads to a finer recrystallized microstructure whatever the temperature and the time of the treatment.

previous article Zinc oxide nanorods-based immuno-field-effect transistor for human serum albumin detection

next article Corrosion and wear resistance of micro-arc oxidation coating on glass microsphere reinforced Mg alloy composite

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Available only for authorised users

Polak C (2009) Métallurgie et recyclage du niobium et du tantale. Tech Ing Métallurgie Extr, TIB369DUO

Buckman RW (2000) New applications for tantalum and tantalum alloys. JOM 52:40–41. https://doi.org/10.1007/s11837-000-0100-6CrossRef

Cardonne SM, Kumar P, Michaluk CA, Schwartz HD (1995) Tantalum and its alloys. Int J Refract Met Hard Mater 13:187–194. https://doi.org/10.1016/0263-4368(95)94023-RCrossRef

Humphreys FJ, Hatherly M (2004) Recrystallization and related annealing phenomena (2nd edition). Elsevier

Hull D, Bacon DJ (2011) Dislocations in other crystal structures. In: Butterworth-Heinemann (ed) Introduction to Dislocations, 5th edn. Oxford, p 109–136. https://doi.org/10.1016/B978-0-08-096672-4.00006-2

Raabe D (2014) Recovery and recrystallization: phenomena, Physics, models, simulation. In: Laughlin DE, Hono K (ed) Physical Metallurgy, 5th edn. Oxford, Elsevier, p 2291–2239 https://doi.org/10.1016/B978-0-444-53770-6.00023-X

Cahn R (1949) Recrystallization of single crystals after plastic bending. J Inst Met 76:121–143

Furu T, Ørsund R, Nes E (1995) Subgrain growth in heavily deformed aluminium—experimental investigation and modelling treatment. Acta Metall Mater 43:2209–2232. https://doi.org/10.1016/0956-7151(94)00410-2CrossRef

Moussa C, Bernacki M, Besnard R, Bozzolo N (2015) About quantitative EBSD analysis of deformation and recovery substructures in pure Tantalum. IOP Conf Ser Mater Sci Eng 89:1–7. https://doi.org/10.1088/1757-899x/89/1/012038CrossRef

10.

Moussa C, Bernacki M, Besnard R, Bozzolo N (2017) Statistical analysis of dislocations and dislocation boundaries from EBSD data. Ultramicroscopy 179:63–72. https://doi.org/10.1016/j.ultramic.2017.04.005CrossRef

11.

Bunkholt S, Nes E, Marthinsen K (2019) Orientation independent and dependent subgrain growth during Iso-thermal annealing of high-purity and commercial purity aluminium. Metals 9:1–19. https://doi.org/10.3390/met9101032CrossRef

12.

Furu T, Marthinsen K, Nes E (1990) Modelling recrystallisation. Mater Sci Technol 6:1093–1102. https://doi.org/10.1179/mst.1990.6.11.1093CrossRef

13.

Stüwe HP, Padilha AF, Siciliano F (2002) Competition between recovery and recrystallization. Mater Sci Eng A 333:361–367. https://doi.org/10.1016/S0921-5093(01)01860-3CrossRef

14.

Kašpar R, Pluhař J (1975) Recrystallization of previously recovered aluminium. Met Sci 9:104–110. https://doi.org/10.1179/030634575790444333CrossRef

15.

Rosen A, Burton MS, Smith GV (1964) Recrystallization of high-purity iron. Trans Metall Soc AIME 230:205–215

16.

Decreus B, Zurob HS, Dunlop J, Bréchet YJM (2007) Effect of low-temperature recovery treatments on subsequent recrystallization in Al-2.5%Mg. Fundam Deform Annealing 550:381–386

17.

Huang L, Huang G, Cao L, Wu X, Jia Z, Xia M, Liu Q (2017) Influence of pre-recovery on the subsequent recrystallization and mechanical properties of a twin-roll cast Al-Mn alloy. Mater Sci Eng A 682:63–72. https://doi.org/10.1016/j.msea.2016.11.018CrossRef

18.

Huang L, Cao L, Huang G, Wu X, Xia M (2018) Effect of pre-recovery on subsequent recrystallization kinetics in moderately deformed and supersaturated Al-Mn alloys. J Cent South Univ 25:534–542. https://doi.org/10.1007/s11771-018-3758-zCrossRef

19.

Ren X, Huang Y, Zhou W, Zhao L, Wang Q, Min X (2019) Influence of pre-recovery on recrystallization behavior, microstructure and mechanical properties of twin-roll cast AA6016 sheet. Mater Sci Eng A 764:1–10. https://doi.org/10.1016/j.msea.2019.138159CrossRef

20.

Liu S, Liu Y, Li LJ, Deng C, Fan H, Guo Y, Cao L, Liu Q (2018) Effects of pre-recovery on the recrystallization microstructure and texture of high-purity tantalum. J Mater Sci 53:2985–2994. https://doi.org/10.1007/s10853-017-1732-zCrossRef

21.

Bachmann F, Hielscher R, Schaeben H (2011) Grain detection from 2d and 3d EBSD data—specification of the MTEX algorithm. Ultramicroscopy 111:1720–1733. https://doi.org/10.1016/j.ultramic.2011.08.002CrossRef

22.

Baton J, Geslin W, Moussa C (2021) Orientation and deformation conditions dependence of dislocation substructures in cold deformed pure tantalum. Mater Charact 171:1–17. https://doi.org/10.1016/j.matchar.2020.110789CrossRef

23.

Dieter GE (1988) Mechanical metallurgy. In SI Metric (Ed) McGraw-Hill Book Company

24.

Asbeck HO, Mecking H (1978) Influence of friction and geometry of deformation on texture inhomogeneities during rolling of Cu single crystals as an example. Mater Sci Eng 34:111–119. https://doi.org/10.1016/0025-5416(78)90041-1CrossRef

25.

Truszkowski W, Krol J, Major B (1980) Inhomogeneity of rolling texture in fcc metals. Metall Trans A 11:749–758. https://doi.org/10.1007/BF02661204CrossRef

26.

Ashby MF (1970) The deformation of plastically non-homogeneous materials. Philos Mag J Theor Exp Appl Phys 21:399–424. https://doi.org/10.1080/14786437008238426CrossRef

27.

Nye JF (1953) Some geometrical relations in dislocated crystals. Acta Metall 1:153–162. https://doi.org/10.1016/0001-6160(53)90054-6CrossRef

28.

Pantleon W (2008) Resolving the geometrically necessary dislocation content by conventional electron backscattering diffraction. Scr Mater 58:994–997. https://doi.org/10.1016/j.scriptamat.2008.01.050CrossRef

29.

Seret A, Moussa C, Bernacki M, Signorelli JW, Bozzolo N (2019) Estimation of geometrically necessary dislocation density from filtered EBSD data by a local linear adaptation of smoothing splines. J Appl Crystallogr 52:548–563. https://doi.org/10.1107/S1600576719004035CrossRef

30.

Deng C, Liu S, Hao XB, Ji JL, Zhang Z, Liu Q (2014) Orientation dependence of stored energy release and microstructure evolution in cold rolled tantalum. Int J Refract Met Hard Mater 46:24–29. https://doi.org/10.1016/j.ijrmhm.2014.05.005CrossRef

31.

Lin N, Liu S, Liu Y, Fan H, Zhu J, Deng C, Liu Q (2019) Effects of asymmetrical rolling on through-thickness microstructure and texture of body-centered cubic (BCC) tantalum. Int J Refract Met Hard Mater 78:51–60. https://doi.org/10.1016/j.ijrmhm.2018.08.012CrossRef

32.

Liu Y, Liu S, Deng C, Fan H, Yuan X, Liu Q (2018) Inhomogeneous deformation of 111 grain in cold rolled tantalum. J Mater Sci Technol 34:2178–2182. https://doi.org/10.1016/j.jmst.2018.03.015CrossRef

33.

Borbély A, Driver JH, Ungár T (2000) An X-ray method for the determination of stored energies in texture components of deformed metals; application to cold worked ultra high purity iron. Acta Mater 48:2005–2016. https://doi.org/10.1016/S1359-6454(99)00457-7CrossRef

34.

Dillamore IL, Smith CJE, Watson TW (1967) Oriented Nucleation in the Formation of Annealing Textures in Iron. Met Sci J 1:49–54. https://doi.org/10.1179/msc.1967.1.1.49CrossRef

35.

Every RL, Hatherly M (1974) Oriented nucleation in low-carbon steels. Texture 1:183–194. https://doi.org/10.1155/TSM.1.183CrossRef

36.

Hutchinson B (1999) Deformation microstructures and textures in steels. Philos Trans R Soc Math Phys Eng Sci 357:1471–1485. https://doi.org/10.1098/rsta.1999.0385CrossRef

37.

Ruggles TJ, Rampton TM, Khosravani A, Fullwood DT (2016) The effect of length scale on the determination of geometrically necessary dislocations via EBSD continuum dislocation microscopy. Ultramicroscopy 164:1–10. https://doi.org/10.1016/j.ultramic.2016.03.003CrossRef

38.

Naghdy S, Verleysen P, Petrov R, Kestens L (2018) Resolving the geometrically necessary dislocation content in severely deformed aluminum by transmission Kikuchi diffraction. Mater Charact 140:225–232. https://doi.org/10.1016/j.matchar.2018.04.013CrossRef

39.

Juul Jensen D, West SS, Poulsen S, Schmidt S (2012) New 3DXRD results on recrystallization and grain growth. Mater Sci Forum 715:393–398CrossRef

40.

Fan H, Liu S, Deng C, Wu X, Cao L, Liu Q (2018) Quantitative analysis: How annealing temperature influences recrystallization texture and grain shape in tantalum. Int J Refract Met Hard Mater 72:244–252. https://doi.org/10.1016/j.ijrmhm.2017.12.003CrossRef

41.

Liu Y, Liu S, Zhu J, Deng C, Fan H, Cao L, Liu Q (2017) Strain path dependence of microstructure and annealing behavior in high purity tantalum. Mater Sci Eng A 707:518–530. https://doi.org/10.1016/j.msea.2017.09.097CrossRef

42.

Vandermeer RA, Snyder WB (1979) Recovery and recrystallization in rolled tantalum single crystals. Metall Trans A 10:1031–1044. https://doi.org/10.1007/BF02811649CrossRef

43.

Sandim HRZ, Martins JP, Padilha AF (2001) Orientation effects during grain subdivision and subsequent annealing in coarse-grained tantalum. Scr Mater 45:733–738. https://doi.org/10.1016/S1359-6462(01)01087-9CrossRef

44.

Sandim HRZ, Martins JP, Pinto AL, Padilha AF (2005) Recrystallization of oligocrystalline tantalum deformed by cold rolling. Mater Sci Eng A 392:209–221. https://doi.org/10.1016/j.msea.2004.09.032CrossRef

45.

Hupalo MF, Sandim HRZ (2001) The annealing behavior of oligocrystalline tantalum deformed by cold swaging. Mater Sci Eng A 318:216–223. https://doi.org/10.1016/S0921-5093(01)01323-5CrossRef

46.

Sandim HRZ, Padilha AF, Randle V, Blum W (1999) Grain subdivision and recrystallization in oligocrystalline tantalum during cold swaging and subsequent annealing. Int J Refract Met Hard Mater 17:431–435. https://doi.org/10.1016/S0263-4368(99)00035-9CrossRef

47.

Ray RK, Jonas JJ, Hook RE (1994) Cold rolling and annealing textures in low carbon and extra low carbon steels. Int Mater Rev 39:129–172CrossRef

48.

Bocos JL, Novillo E, Petite MM, Iza-Mendia A, Gutiérrez I (2003) Aspects of Orientation-Dependent grain growth in extra-low carbon and interstitial-free steels during continuous annealing. Metall Mater Trans A 34:827–839. https://doi.org/10.1007/s11661-003-1010-3CrossRef

49.

Siciliano F, Monteiro W, Padilha AF (1995) Comparative study of the recrystallization of pure niobium and a Nb-1 wt.% Zr alloy. Z Fuer Met 86:713–718

50.

Nes E (1995) Recovery revisited. Acta Metall Mater 43:2189–2207. https://doi.org/10.1016/0956-7151(94)00409-9CrossRef

51.

Ryum N (1969) The influence of dislocation arrangement on recrystallization in an Al-Mg-Zn alloy. Acta Metall 17:831–837. https://doi.org/10.1016/0001-6160(69)90102-3CrossRef

52.

Price CW (1989) Comments on the extent of simultaneous recovery during recrystallization and its effect on recrystallization kinetics. Scr Metall 23:1273–1276. https://doi.org/10.1016/0036-9748(89)90043-4CrossRef

53.

Bréchet YJM, Zurob HS, Hutchinson CR (2009) On the effect of pre-recovery on subsequent recrystallization. Int J Mater Res 100:1446–1448. https://doi.org/10.3139/146.110194CrossRef

54.

Yu T, Hansen N (2016) Coarsening kinetics of fine-scale microstructures in deformed materials. Acta Mater 120:40–45. https://doi.org/10.1016/j.actamat.2016.08.032CrossRef

55.

Yu T, Hansen N, Huang X (2011) Recovery by triple junction motion in aluminium deformed to ultrahigh strains. Proc R Soc Math Phys Eng Sci 467:3039–3065. https://doi.org/10.1098/rspa.2011.0097CrossRef

56.

Duggan BJ, Lücke K, Köhlhoff G, Lee CS (1993) On the origin of cube texture in copper. Acta Metall Mater 41:1921–1927. https://doi.org/10.1016/0956-7151(93)90211-ACrossRef

57.

Primig S, Leitner H, Knabl W, Lorich A, Clemens H, Stickler R (2012) Influence of the heating rate on the recrystallization behavior of molybdenum. Mater Sci Eng A 535:316–324. https://doi.org/10.1016/j.msea.2011.12.099CrossRef

58.

Gatti JR, Bhattacharjee PP (2015) Effect of prior recovery treatment on the evolution of cube texture during annealing of severely warm-rolled Al-2.5 wt pctMg alloy. Metall Mater Trans A 46:4966–4977. https://doi.org/10.1007/s11661-015-3129-4CrossRef

Title: Influence of pre-recovery on the recrystallization of pure tantalum
Authors: J. Baton
W. Geslin
C. Moussa
Publication date: 25-06-2021
Publisher: Springer US
Published in: Journal of Materials Science / Issue 27/2021
Print ISSN: 0022-2461
Electronic ISSN: 1573-4803
DOI: https://doi.org/10.1007/s10853-021-06218-0

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 27/2021

ZnO@zeolitic imidazolate frameworks derived porous hybrid hollow carbon shell as an efficient electrocatalyst for oxygen reduction

A review on the direct electroplating of polymeric materials

Nanomaterials-patterned flexible electrodes for wearable health monitoring: a review

Exploration of the temperature-dependent correlations present in the structural, morphological and electrical properties of thermally reduced free-standing graphene oxide papers

Promotion effect of rare earth elements (Ce, Nd, Pr) on physicochemical properties of M-Al mixed oxides (M = Cu, Ni, Co) and their catalytic activity in N2O decomposition

Photovoltaic effect on the n-GaAs surface irradiated with low-energy Ar+ ions

Premium Partners