Top

Published in:

2019 | OriginalPaper | Chapter

Influence of Residual Stress Induced in Steel Material on Eddy Currents Response Parameters

Authors : Frantisek Botko, Jozef Zajac, Andrej Czan, Svetlana Radchenko, Dominika Lehocka, Jan Duplak

Published in: Advances in Manufacturing II

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Nowadays, it is very important to monitor the quality of engineered products. An indispensable part of the product’s qualitative characteristics is the integrity of the surface. It also includes a residual stress monitoring area. Residual stresses can be detected and measured by many destructive and non-destructive methods. The implementation of non-destructive methods is becoming increasingly desirable because the component being tested can be checked without disturbing and therefore continue to be used. The eddy currents method is expanded in the engineering practice to detect cracks in conductive materials. Residual stress detection has the potential in the future to accelerate and reduce the detection of residual stresses directly in the production process. Presented article is aimed at comparing the response of the eddy currents to the residual stresses induced in the steel material. Experiments were performed on free cutting steel 11SMnPb37. Residual stresses were induced by chip machining. Subsequent were investigated different residual stresses values in response to the eddy currents. The results of the experiment point to the possible application of the eddy current method to detect residual stresses in conductive materials.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter The Impact of Long-Term Environmental Conditions on the Lifetime Prediction (S-N) of Biomaterial Used in Dentistry

next chapter Determination of Dynamic Properties of a Steel Hollow Section Filled with Composite Mineral Casting

Kloos, K.H., Kaiser, B.: Residual stresses induced by manufacturing, residual stresses measurement, calculation, evaluation. In: Proceedings of the Conference on Residual Stresses, pp. 205–226 (1991)

Davim, P.J.: Residual stresses and microstructural modifications. In: Surface Integrity in Machining, pp. 67–126. Springer (2010). https://doi.org/10.1007/978-1-84882-874-2

Winiarski, B., Benedetti, M., Fontanari, V., et al.: High spatial resolution evaluation of residual stresses in shot peened specimens containing sharp and blunt notches by micro-hole drilling, micro-slot cutting, and micro-X-ray diffraction methods. Exp. Mechan. 56(8), 1449–1463 (2016). https://doi.org/10.1007/s11340-016-0182-xCrossRef

Sun, T.Z., Roy, M.J., Strong, D., et al.: Comparison of residual stress distributions in conventional and stationary shoulder high-strength aluminum alloy friction stir welds. J. Mater. Process. Technol. 242, 91–100 (2017). https://doi.org/10.1016/j.jmatprotec.2016.11.015CrossRef

Coules, H.E., Smith, D.J., Orrock, P.J., et al.: A combined experimental and modelling approach to elastic-plastic crack driving force calculation in the presence of residual stresses. Exp. Mech. 56(8), 1313–1325 (2016). https://doi.org/10.1007/s11340-016-0171-0CrossRef

Smith, D.J.: Creep stress relaxation and crack incubation in the presence of structural elastic follow-up. Trans. Indian Inst. Met. 69(2), 483–488 (2016). https://doi.org/10.1007/s12666-015-0819-yCrossRef

Ainsworth, R.A., Sharples, J.K., Smith, S.D.: Effects of residual stresses on fracture behaviour-experimental results and assessment methods. J. Strain Anal. Eng. Des. 35(4), 307–316 (2000). https://doi.org/10.1243/0309324001514431CrossRef

Venkata, K.A., Truman, C.E., Smith, D.J., et al.: Characterising electron beam welded dissimilar metal joints to study residual stress relaxation from specimen extraction. Int. J. Press. Vessels Pip. 139, 237–249 (2016). https://doi.org/10.1016/j.ijpvp.2016.02.025CrossRef

Wang, D.M., Mu, J., Chen, Y., et al.: A study of stress-induced phase transformation and micromechanical behavior of CuZr-based alloy by in-situ neutron diffraction. J. Alloy. Compd. 696, 1096–1104 (2017). https://doi.org/10.1016/j.jallcom.2016.12.020CrossRef

10.

Wang, Y.L., Zhu, Y.L., Hou, S., et al.: Investigation on fatigue performance of cold expansion holes of 6061-T6 aluminum alloy. Int. J. Fatigue 95, 216–228 (2017). https://doi.org/10.1016/j.ijfatigue.2016.10.030CrossRef

11.

Yang, H., Yo, D., Chen, Y., et al.: In-situ TOF neutron diffraction studies of cyclic softening in superelasticity of a NiFeGaCo shape memory alloy. Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process. 680, 324–328 (2017). https://doi.org/10.1016/j.msea.2016.10.078CrossRef

12.

Aba-Perea, P.E., Pilling, T., Withers, P.J., et al.: Determination of the high-temperature elastic properties and diffraction elastic constants of Ni-base superalloys. Mater. Des. 89, 856–863 (2016). https://doi.org/10.1016/j.matdes.2015.09.152CrossRef

13.

Aba-Perea, P.E., Pilling, T., Preuss, M.: In-situ residual stress analysis during annealing treatments using neutron diffraction in combination with a novel furnace design. Mater. Des. 110, 925–931 (2016). https://doi.org/10.1016/j.matdes.2016.07.078CrossRef

14.

Krejci, L., Hlavaty, I., Sevcikova, X.: Transition zones study of the heterogenous welded joints. In: Metal 2013: 22nd International Conference on Metallurgy and Materials, pp. 785–789. Tanger Ltd. (2013)

15.

Wang, Q., Liu, X.S., Yan, Z.J., et al.: On the mechanism of residual stresses relaxation in welded joints under cyclic loading. Int. J. Fatigue 105, 43–59 (2017). https://doi.org/10.1016/j.ijfatigue.2017.08.016CrossRef

16.

Mohyla, P., Tomcik, P., Benes, L., et al.: Effect of post-welding heat treatment on secondary hardening of welded joints Cr-Mo-V steel. Met. Sci. Heat Treat. 53(7–8), 374–378 (2011). https://doi.org/10.1007/s11041-011-9401-3CrossRef

17.

Cozzolino, L.D., Coules, H.E., Colegrove, P.A., et al.: Investigation of post-weld rolling methods to reduce residual stress and distortion. J. Mater. Process. Technol. 247, 243–256 (2017). https://doi.org/10.1016/j.jmatprotec.2017.04.018CrossRef

18.

Shen, Y., Lo, C.C.H., Nakagawa, N., Frishman, A.M.: Residual stress profile assessment by eddy current for shot peened nickel superalloy. J. Nondestr. Eval. 29(1), 1–13 (2010). https://doi.org/10.1007/s10921-009-0060-xCrossRef

19.

Abu-Nabah, B.A., Hassan, W.T., Ryan, D., Blodgett, M.P., Nagy, P.B.: The effect of hardness on eddy current residual stress profiling in shot-peened nickel alloys. J. Nondestr. Eval. 29(3), 143–153 (2010). https://doi.org/10.1007/s10921-010-0072-6CrossRef

20.

Habibalahi, A., Safizadeh, M.S.: Forward to residual stress measurement by using pulsed eddy current technique. Insight-Non-Destr. Test. Cond. Monit. 55(9), 492–497 (2013). https://doi.org/10.1784/insi.2012.55.9.492CrossRef

21.

Blodgett, M., Abu-Nabah, B., Hassan, W., Nagy, P.B.: On the limitations of eddy current residual stress profiling in precipitation-hardened nickel-base superalloys. In: Electromagnetic Nondestructive Evaluation (XIII), vol. 33, pp. 95–102. IOS Press (2010). https://doi.org/10.3233/978-1-60750-554-9-95

22.

Boone, T.A.P.S., Raoa, S.I., Wang, P., Nagy, P., Blodgett M.: Investigation of microstructural effects on electrical resistivity and their implications for eddy current methods in measuring residual stresses in IN718. In: Electromagnetic Nondestructive Evaluation (XIII), vol. 33, pp. 165–172. IOS Press (2010). https://doi.org/10.3233/978-1-60750-554-9-165

23.

Withers, P.J., Bhadeshia, H.K.D.H.: Residual stress. Part 1–measurement techniques. Mater. Sci. Technol. 17(4), 355–365 (2001). https://doi.org/10.1179/026708301101509980CrossRef

24.

Botko, F., Zajac, J., Czan, A., Radchenko, S., Simkulet, V., Radic, P., Bircak, J.: Preliminary study of residual stress measurement using eddy currents phasor angle. In: Advances in Manufacturing Engineering and Materials, pp. 386–397. Springer, Cham (2019)

25.

García-Martín, J., Gómez-Gil, J., Vázquez-Sánchez, E.: Non-destructive techniques based on eddy current testing. Sensors 11(3), 2525–2565 (2011). https://doi.org/10.3390/s110302525CrossRef

26.

Krolczyk, G.M., Maruda, R.W., Krolczyk, J.B., et al.: Parametric and nonparametric description of the surface topography in the dry and MQCL cutting conditions. Measurement 121, 225–239 (2018). https://doi.org/10.1016/j.measurement.2018.02.052CrossRef

27.

Jurko, J.: Optimization of technological process and their safety factors. In: Safety in Manufacturing Processes, pp. 58–67. Institute of Scientific Research and Expertises, Gorzów Wlkp (2017). ISBN 978-83-64249-63-1

Title: Influence of Residual Stress Induced in Steel Material on Eddy Currents Response Parameters
Authors: Frantisek Botko
Jozef Zajac
Andrej Czan
Svetlana Radchenko
Dominika Lehocka
Jan Duplak
Publisher: Springer International Publishing
Book: Advances in Manufacturing II
Print ISBN: 978-3-030-16942-8

Electronic ISBN: 978-3-030-16943-5

Copyright Year: 2019
DOI: https://doi.org/10.1007/978-3-030-16943-5_47

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners