Top

International Journal on Interactive Design and Manufacturing (IJIDeM)

Published in:

31-01-2023 | Original Paper

Investigation of buckling response of variable angle fiber composite plates using differential evolution

Authors: Umut Beyazgül, Demet Balkan

Published in: International Journal on Interactive Design and Manufacturing (IJIDeM) | Issue 4/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In this paper, the effectiveness of variable angle fiber composites is studied in terms of layers and aspect ratio. The performance of variable angle tow laminated composite plates under the effect of the critical buckling load is examined by using the differential evolution algorithm. The behaviors of optimal variable angle fiber composite plates and constant angle fiber composite plates under uniaxial loading were compared. An antisymmetric linear angle change depending on a single axis is used for continuous angle orientation distribution, and a radius of tow curvature constraint has been introduced to maintain manufacturability using the automated fiber placement. The increment rate of critical buckling load is investigated, and the results were validated by comparing the buckling and ply failure results obtained as the number of layers and aspect ratio changes.

previous article Analysis on significance of various statistical texture features in vision-based surface roughness prediction in end milling process

next article De-manufacturing: identification of the best strategies through the environmental and economic evaluation

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Mangalgiri, P.D.: Composite materials for aerospace applications. Bull. Mater. Sci. 22(3), 657–664 (1999). https://doi.org/10.1007/bf02749982CrossRef

Nagelsmit, M.H., Kassapoglou, C., Gürdal, Z.: A New Fibre Placement Architecture for Improved Damage Tolerance. Nationaal Lucht- en Ruimtevaartlaboratorium, (2010)

Peeters, D.M.J.: Design Optimisation of Practical Variable Stiffness and Thickness Laminates. Ph.D. thesis (2017). http://resolver.tudelft.nl/uuid:a07ea6a4-be73-42a6-89b5-e92d99bb6256

Clint, J., Kumar, S., Shaik, N.: Buckling analysis on aircraft fuselage structure skin. Int. J. Eng. Dev. Res. 2(4), 3461–3474 (2014)

Marques, F.E.C., da Mota, A.F.S., Loja, M.A.R.: Variable stiffness composites: optimal design studies. J. Compos. Sci. 4(2), 80 (2020). https://doi.org/10.3390/jcs4020080CrossRef

Hyer, M., Lee, H.: The use of curvilinear fiber format to improve buckling resistance of composite plates with central circular holes. Compos. Struct. 18(3), 239–261 (1991). https://doi.org/10.1016/0263-8223(91)90035-wCrossRef

Campen, J.V., Kassapoglou, C., Gurdal, Z.: Design of Fiber-Steered Variable-Stiffness Laminates Based on a Given Lamination Parameters Distribution, American Institute of Aeronautics and Astronautics, (2011). https://doi.org/10.2514/6.2011-1894

Stegmann, J., Lund, E.: Discrete material optimization of general composite shell structures. Int. J. Numer. Meth. Eng. 62(14), 2009–2027 (2005). https://doi.org/10.1002/nme.1259CrossRefMATH

Setoodeh, S., Abdalla, M.M., Gürdal, Z.: Design of variable–stiffness laminates using lamination parameters. Compos. B Eng. 37(4–5), 301–309 (2006). https://doi.org/10.1016/j.compositesb.2005.12.001CrossRef

10.

Fallahi, N., Viglietti, A., Carrera, E., Pagani, A., Zappino, E.: Effect of fiber orientation path on the buckling free vibration, and static analyses of variable angle tow panels. Facta Univ. Series Mech. Eng. 18(2), 165 (2020). https://doi.org/10.22190/fume200615026fCrossRef

11.

Gurdal, Z., Olmedo, R.: Composite Laminates with Spatially Varying Fiber Orientations - ‘Variable Stiffness Panel Concept’, American Institute of Aeronautics and Astronautics, (1992). https://doi.org/10.2514/6.1992-2472

12.

Gurdal, Z., Olmedo, R.: In-plane response of laminates with spatially varying fiber orientations—variable stiffness concept. AIAA J. 31(4), 751–758 (1993). https://doi.org/10.2514/3.11613CrossRefMATH

13.

Waldhart, C., Gurdal, Z., Ribbens, C.: Analysis of Tow Placed, Parallel Fiber, Variable Stiffness Laminates, American Institute of Aeronautics and Astronautics, (1996). https://doi.org/10.2514/6.1996-1569

14.

Lemaire, E., Zein, S., Bruyneel, M.: Optimization of composite structures with curved fiber trajectories. Compos. Struct. 131, 895–904 (2015). https://doi.org/10.1016/j.compstruct.2015.06.040

15.

Reddy, J.N.: Mechanics of Laminated Composite Plates and Shells, CRC Press, (2003). https://doi.org/10.1201/b12409

16.

Jones, R.M.: Mechanics of Composite Materials, CRC Press, (2018). https://doi.org/10.1201/9781498711067

17.

Halpin, J.C., Finlayson, K.M.: Primer on Composite Materials Analysis, 2nd edn. Routledge, (2017). https://doi.org/10.1201/9780203742235

18.

Goldberg, D.E.: Genetic algorithms in search, optimization, and machine learning. Choice Reviews Online, 27 (02), 27–0936–27–0936 (1989). https://doi.org/10.5860/choice.27-0936

19.

Rechenberg, I.: Evolution Strategy: Optimization of Technical Systems According to the Principles of Biological Evolution. Ph.D. thesis (1973)

20.

Lukman, N., Irfan, M., Nugraha, A., Jumadi, J.: Comparison between genetic algorithm with differential evolution in study scheduling. IOP Conf. Series Mater. Sci. Eng. 1098(3), 032082 (2021). https://doi.org/10.1088/1757-899x/1098/3/032082CrossRef

21.

Storn, R., Price, K.: J. Global Optim. 11(4), 341–359 (1996). https://doi.org/10.1023/a:1008202821328

22.

Storn, R.: On the usage of differential evolution for function optimization (IEEE)

23.

McKay, M.D., Beckman, R.J., Conover, W.J.: Comparison of three methods for selecting values of input variables in the analysis of output from a computer code. Technometrics 21(2), 239–245 (1979). https://doi.org/10.1080/00401706.1979.10489755MathSciNetCrossRefMATH

24.

Kassapoglou, C.: Design and Analysis of Composite Structures. Wiley (2013). https://doi.org/10.1002/9781118536933

25.

Abdel-Ghany, A.W., Taha, I., Ebeid, S.: Failure prediction of fiber reinforced polymer pipes using fea. Int. J. Eng. Tech. Res. 4(2), 115–120 (2016)

26.

Lopes, C., Gürdal, Z., Camanho, P.: Variable-stiffness composite panels: buckling and first-ply failure improvements over straight-fibre laminates. Comput. Struct. 86(9), 897–907 (2008). https://doi.org/10.1016/j.compstruc.2007.04.016CrossRef

27.

Freedman, D., Pisani, R., Purves, R.: Statistics, 4th edn. WW Norton, New York, NY (2007)MATH

28.

Piepho, H.P.: A coefficient of determination (r2) for generalized linear mixed models. Biom. J. (2019). https://doi.org/10.1002/bimj.201800270MathSciNetCrossRefMATH

29.

Olmedo, R., Gurdal, Z.: Buckling Response of Laminates with Spatially Varying Fiber Orientations, American Institute of Aeronautics and Astronautics, (1993). https://doi.org/10.2514/6.1993-1567

Title: Investigation of buckling response of variable angle fiber composite plates using differential evolution
Authors: Umut Beyazgül
Demet Balkan
Publication date: 31-01-2023
Publisher: Springer Paris
Published in: International Journal on Interactive Design and Manufacturing (IJIDeM) / Issue 4/2023
Print ISSN: 1955-2513
Electronic ISSN: 1955-2505
DOI: https://doi.org/10.1007/s12008-022-01195-3

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Other articles of this Issue 4/2023

A comparative analysis on optimization of end milling processes using multi-criteria decision making methods

An in-process tool wear assessment using Bayesian optimized machine learning algorithm

Design and implementation of eye tracking application for generation of augmented reality content on spatial see through display of remote and virtual control tower (RVT)

Design authentication of a novel common interconvertible pallets for automobile engine: a finite element study

Analysis of influence of process parameters in ultrasonic assisted jet electrochemical manufacturing

An Adaptive Quadrature Criterion for Simulating Thermoelastic Crack Propagation Using EFGM

Premium Partner