Top

Metallurgist

Published in:

15-11-2023

Investigation of Material Properties for Cryogenic Products, Produced by Additive Manufacturing Techniques

Authors: S. B. Ermakov, B. S. Ermakov, S. A. Vologzhanina, O. I. Sleptsov

Published in: Metallurgist | Issue 5-6/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Modern capabilities of additive technologies make it possible to maximize the metal utilization rate, reduce the carbon footprint, and ensure fast and high-quality manufacture of products of the required shapes and sizes with minimal deviations from the required geometric dimensions from metals, alloys, and polymeric materials. However, the almost complete absence of domestic producers of initial powders, as well as the lack of information about the features of structure formation in products made by 3D printing, especially taking into account operation in a wide temperature range, hinder the development of this industry. The article presents the results of investigating powders obtained from the atomized powder of steel 12Cr18Ni12Ti, and samples made by direct laser melting, across the temperature range from +600 to –196°C.

previous article Effect of Technological Parameters of Selective Electron Beam Melting on Chemical Composition, Microstructure, and Porosity of a TiAl-Alloy of Ti-Al-V-Nb-Cr-Gd System

next article Investigation of the Intensity of Residual Stresses in a Growing Body Obtained by the Electric Arc Method

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Y. P. Solntsev, B. S. Ermakov, and O. I. Sleptsov, Materials for Low and Cryogenic Temperatures: Encyclopedic Reference [in Russian], Khimizdat, St. Petersburg (2008).

M. V. Kostina, L. G. Rigina, S. O. Muradyan, A. I. Il’inskii, and V. S. Kostina, “Properties of austenitic, heavily alloyed, high-nitrogen steels made by various casting, special electrometallurgy, and hot deformation methods,” Russian Metallurgy (Metally), 6, 559–568 (2022); DOI:https://doi.org/10.1134/S0036029522060131.

T. V. Rashev, A. V. Eliseev, L. T. Zhekova, and P. V. Bogev, “High nitrogen steels,” Izvestiya. Ferrous Metallurgy, 62(7), 503–510 (2019); DOI:https://doi.org/10.17073/0368-0797-2019-7-503-510.CrossRef

I. B. Sergeev and O. Yu. Lebedeva, “Russia and Germany: new prospects for cooperation in the raw materials sector,” Zapiski Gornogo instituta, 221, 749 (2016); DOI: https://doi.org/10.18454/pmi.2016.5.749.CrossRef

M. I. Davydenko and A. Y. Baranov, “Analysis of the possibility of improving the energy efficiency of the LNG shipment system from large-capacity storage facilities by upgrading the design of the submersible pump,” IOP Conf. Ser.: Earth and Environmental Sci., 988(3), 1–6 (2022).

A. Y. Baranov, A. V. Novitskaya, D. V. Makarchuk, and A. P. Spiridonova, “Liquid cooling systems of individual cryotherapy units,” Vestnik Kazakhskogo Natsional’nogo Universiteta. Seriya: Fizicheskaya, 1(80), 58–65 (2022)

L. V. Ivanov, A. Y. Baranov, V. A. Tsvetkov, A. V. Vasilenok, and A. M. Andreev, “Change of exploitation parameters of a vessel after the switch to the usage of LNG as the main fuel,” IOP Conf. Ser.: Mater. Sci. and Eng., 1111(1), 012021 (2021).

A. N. Kubanova, A. N. Sergeev, N. M. Dobrovolsky, A. E. Gvozdev, P. N. Medvedev, and D. V. Maliy, “Features of materials and technologies of additive fabrication,” Chebyshevskii Sbornik , 20(3), 453–477 (2019).CrossRef

E. R. Guseinov, P. V. Petrovsky, A. Y. Travyanov, A. S. Aleshenko, P. Y. Sokolov, and A. O. Lagutin, “Directional hot isostatic pressing of Ti6Al4V-SiC composite with elements prepared by selective laser melting technology,” Metallurgist, 65(11/12), 1413–1422 (2022); DOI:https://doi.org/10.1007/s11015-022-01293-3.CrossRef

10.

P. Moghimian, T. Poirie, M. Habibnejad-Korayem, J. A. Zavala, J. Kroeger, F. Marion, and F. Larouche, “Metal powders in additive manufacturing: A review on reusability and recyclability of common titanium, nickel and aluminum alloys,” Addit. Manuf., 43, 102017 (2021); DOI:https://doi.org/10.1016/j.addma.2021.102017.CrossRef

11.

V. I. Alekseev, B. K. Barakhtin, and A. S. Zhukov, “Chemical inhomogeneity as a factor in increasing the strength of steels manufactured using selective laser melting technology,” J. of Mining Institute, 242, 19 (2020).CrossRef

12.

P. Kunwar, M. J. Ransbottom, and P. Soman, “Threedimensional printing of double-network hydrogels: Recent progress, challenges, and future outlook,” 3D Print. Addit. Manuf., 9(5), 435–449 (2022); DOI:https://doi.org/10.1089/3dp.2020.0239.CrossRef

13.

A. S. Akhmetov and Z. V. Eremeeva, “Investigation of the structure of sintered blanks from powder mixture of R6M5K5 high-speed steel containing diffusion-alloyed powder,” Metallurgist, 66(3-4), 299–303 (2022); DOI:https://doi.org/10.1007/s11015-022-01329-8.CrossRef

14.

S. B. Ermakov, S. A. Vologzhanina, B. S. Ermakov, et al., “Features of obtaining Ni–Cr–Fe alloy powders by plasma atomization,” Materi. Sci. Forum, 1040, 1–7 (2021).CrossRef

15.

S. B. Ermakov, “Regulation of powder particles shape and size at plasma spraying,” Science Vector of Togliatti State University, No. 1, 7–15 (2021).

16.

K. Grzelak, M. Bielecki, J. Kluczynski, I. Szachogtuchowicz, L. Sniezek, et al., “A comparative study on laser powder bed fusion of differently atomized 316L stainless steel,” Materials, 15(14), 4938 (2022); DOI:https://doi.org/10.3390/ma15144938.CrossRef

17.

Z. Zhang, C. Wang, Q. Sun, S. Zhu, and W. Xia, “Spheroidization of tungsten powder by a DC arc plasma generator with multiple cathodes,” Plasma Chem. Plasma Process., 42(4), 939–956 (2022); DOI:https://doi.org/10.1007/s11090-022-10250-6.CrossRef

18.

Q. Zhang, D. Yu, P. Zhang, Y. Shen, J. Liu, and Y. Xiao, “Modeling and analysis of the plasma primary atomization for controllable preparation of high-quality spherical metal powders,” J. Mater. Process. Technol., 309, 117753 (2022); DOI: 10.1016/ j.jmatprotec.2022.117753.CrossRef

19.

I. M. Gembitskaya and M. V. Gvozdetskaya, “Transformation of grains of technological raw materials in the process of obtaining fine powders,” J. of Mining Institute, 249(5), 401–407 (2021); DOI: https://doi.org/10.31897/PMI.2021.3.9.CrossRef

20.

V. Safronov, N. Arkhipov, V. Bakhtin, V. Barsuk, S. Kurkin, E. Mironova, G. Piazza, H. Wurz, and A. Zhitlukhin, “Macroscopic erosion of divertor materials under plasma heat load typical for ITER hard disruption,” Nuclear Science and Technology (Voprosy Atomnoy Nauki i Tekhniki) (VANT), No. 5, 27–29 (2002).

21.

N. E. Ozerskoy, A. A. Popovich, and B. S. Ermakov, “Preparation of spherical powders of VT6 alloy for selective laser melting”, Nauchno-Tekhnicheskie Vedomosti SPbPU. Estestvennye i Inzhenernye Nauki, 25(4), 107–115 (2019).

22.

A. M. Dmitriev, N. V. Korobova, and A. Zh. Badalyan, “Development and study of moulding technology using specialized presses with subsequent sintering of high-density parts from iron-based powders,” Zapiski Gornogo Instituta, 236, 216 (2019); DOI: https://doi.org/10.31897/pmi.2019.2.216.CrossRef

23.

B. S. Ermakov, S. B. Ermakov, and M. A. Odnobludov, Metal Powder Production Facility. Utility Model Patent 204335 U1, May 20, 2021. Application No. 2020140625 of December 19, 2020.

24.

K. Y. Shakhnazarov and E. I. Pryakhin, “Detection of intermediate phases in metal alloys,” Key Eng. Mater., 854, 23–29 (2020); https://doi.org/10.4028/www.scientific.net/KEM.854.23.CrossRef

25.

A. G. Syrkov, N. R. Prokopchuk, A. G. Vorobiev, and V. N. Brichkin, “Academician N. S. Kurnakov as the founder of physicochemical analysis — the scientific base for the development of new metal alloys and materials,” Tsvetnye Metally, No. 1, 77–83 (2021); DOI: https://doi.org/10.17580/tsm.2021.01.09.CrossRef

26.

E. I. Pryakhin and D. M. Sharapova, “Understanding the structure and properties of the heat affected zone in welds and model specimens of high-strength low-alloy steels after simulated heat cycles,” CIS Iron and Steel Rev., No. 19, 60–65 (2020).

27.

B. Chalmers, Principles of Solidification, Theories of Melting and the Liquid State, Wiley, New York (1964).

28.

H. Fredriksson and U. Akerlind, Solidification and Crystallization Processing in Metals and Alloys, Stockholm, Sweden (2012).CrossRef

29.

V. Prokhorenko, S. Mudry, S. Prokhorenko, and V. Halchak, “New complex of experimental methods in studying of crystallization in metallic systems,” in: Proc. of 7th Int. Sci. Conf. AMME — Gliwice (1998), pp. 431–434.

30.

J. Linke, M. Akiba, R. Duwe, A. Lodato, H. J. Penkalla, M. Rodig, and K. Schopflin, “Material degradation and particle formation under transient thermal loads”, J. Nucl. Mater., 290-293, 1102–1106 (2001).CrossRef

31.

A. G. Syrkov and N. R. Prokopchuk, “Dispersed iron obtaining by the method of solid state hydride synthesis and the problem of hydrophobicity of metal,” CIS Iron and Steel Rev., 21(1), 16–22 (2021); DOI: https://doi.org/10.17580/cisisr.2021.01.03.CrossRef

32.

J. Qinggong, W. Qingxiang, and L. Shuhua, “Effect of powders on microstructure and performance of inconel 718 alloy prepared by SPS,” Mater. Res. Express, 9(9); DOI:https://doi.org/10.1088/2053-1591/ac8c1e.

33.

V. Sufiyarov, A. V. Orlov, E. V. Borisov, V. V. Sokolova, M. O. Chukovenkova, A. V. Soklakov, D. S. Mikhalyuk, and A. A. Popovich, “Modelling of mechanical properties of cellular structures fabricated by selective laser fusion,” Pis’ma o materialakh , 10(2), 123–128 (2020).

Title: Investigation of Material Properties for Cryogenic Products, Produced by Additive Manufacturing Techniques
Authors: S. B. Ermakov
B. S. Ermakov
S. A. Vologzhanina
O. I. Sleptsov
Publication date: 15-11-2023
Publisher: Springer US
Published in: Metallurgist / Issue 5-6/2023
Print ISSN: 0026-0894
Electronic ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-023-01552-x

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 5-6/2023

Metallurgist Volume 67, Number 5

Composition, Structure and Properties of Hard Alloy Components Made of Electroerosive Powders Prepared from Solid T5K10 Alloy Waste in Water

Simulation of Heat Transfer Conditions in a Secondary Cooling Zone of a CCM

Investigation of the Intensity of Residual Stresses in a Growing Body Obtained by the Electric Arc Method

Structure, Phase Composition, and Wear Resistance of 20Cr13 Steel after Microarc Carburizing

Comparison of X-Ray Computed Tomography and Metallography for Determination of Pore Size

Premium Partners