Top

Glass and Ceramics

Published in:

08-11-2018 | SCIENCE FOR CERAMIC PRODUCTION

Investigation of the Properties of SiC–ZrB₂-Based Ceramic Composite Materials Obtained by Spark Plasma Sintering

Authors: N. E. Shchegoleva, S. A. Evdokimov, S. Yu. Modin, F. N. Karachevtsev

Published in: Glass and Ceramics | Issue 7-8/2018

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Spark plasma sintering was used to obtain experimental samples of ceramic composite materials in the system SiC–ZrB₂ with graphite and aluminum nitride as additives. The physical and mechanical properties of composites (density, strength in bending, hardness, cracking resistance) were studied as a function of the production temperature parameters. The microstructure of the materials was studied and x-ray spectral microanalysis was performed and the oxidation resistance of the obtained samples at 1500°C was determined.

previous article Specifics of Heat-Transfer Through the Melting Tank Wall in a Glass Furnace

next article Porous Functional Coatings by Microarc Oxidation

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

E. N. Kablov, “Innovative development work at FGUP “VIAM” GNTs RF on the implementation of ‘Strategic directions of advancement of materials and their processing technologies for the period to 2030’,” Aviats. Mater. Tekhnol., No. 1, 3 – 33 (2015); DOI: https://doi.org/10.18577/2071-9140-2015-0-1-3-33.

E. N. Kablov, D. V. Grashchenkov, N. V. Isaeva, et al., “Glass and ceramics based high-temperature composite materials for use in aviation technology,” Steklo Keram., No. 4, 7 – 11 (2012); E. N. Kablov, D. V. Grashchenkov, N. V. Isaeva, et al., “Glass and ceramics based high-temperature composite materials for use in aviation technology,” Glass Ceram., 69(3 – 4), 109 – 112 (2012).CrossRef

E. N. Kablov, D. V. Graschenkov, N. V. Isaeva, and S. Sg. Solntsev, “Promising high-temperature ceramic composite materials,” Ross. khim. Zh., 54(1), 20 – 24 (2010).

A. S. Chainikova, L. A. Orlova, N. V. Popovich, et al., “Functional composites based on glass_glass-ceramic matrices and discrete fillers: properties and applications,” Aviats. Mater. Tekhnol., No. S6, 52 – 58 (2014); DOI: https://doi.org/10.18577/2071-9140-2014-0-s6-52-58.CrossRef

A. S. Chainikova, L. A. Orlova, N. V. Popovich, et al., “Dispersion-hardened composites based on glass/glass-ceramic matrices: properties and applications (overview),” Aviats. Mater. Tekhnol., No. 3, 45 – 54 (2014); DOI: https://doi.org/10.18577/2071-9140-2014-0-3-45-54.CrossRef

O. Yu. Sorokin, D. V. Graschenkov, S. St. Solntsev, and S. A. Evdokimov, “Ceramic composite materials with high oxidation resistance for advanced aircraft,” Tr. VIAM: Elektron. Nauch-Tekhnich. Zh., No. 6, Art. 08 (2014); URL: http://www.viamworks.ru; DOI: https://doi.org/10.18577/2307-6046-2014-0-6-8-8.CrossRef

D. V. Grashchenkov, O. Y. Sorokin, Y. E. Lebedeva, and M. L. Vaganova, “Specific features of sintering of HfB₂-based refractory ceramic by hybrid spark plasma sintering,” Russ. J. Appl. Chem., 88(3), 386 – 393 (2015).CrossRef

Yu. E. Lebedeva, D. V. Graschenkov, N. V. Popovich, et al., “R&D on thermostable coatings obtained by the sol-gel method in the system Y₂O₃–Al₂O₃–SiO₂ for SiC-containing materials,” Tr. VIAM: Elektron. Nauch.-Tekhn . Zh., No. 12, Art. 03 (2013); URL: http://www.viam-works.ru.

Pat. US 5990025 A, Ceramic Matrix Composite and Method of Manufacturing the Same, publ. 1999.

10.

A. Noviyanto, Y. Dang-Hyok, and H. Young-Hwan, “Study of SiC_f /SiC hybrid composites fabricated by hot pressing and spark plasma sintering,” Adv. Appl. Ceram., 110(7), 375 – 382 (2011); DOI: https://doi.org/10.1179/1743676111Y.0000000025. CrossRef

11.

Pat. US 6291058 B1, Composite Material with ceramic Matrix and SiC Fiber Reinforcement, Method for Making Same; publ. 2001.

12.

Pat. US 20110200748 A1, Method for Producing Parts Made of a Thermostructural Composite Material; publ. 2001.

13.

W. Krenkel and F. Berndt, “C/C-SiC composites for space applications and advanced friction systems,” Mater. Sci. Eng. A, 412(1 – 2), 177 – 181 (2005); DOI: https://doi.org/10.1016/j.msea.2005.08.204.CrossRef

14.

N. S. Jacobson, “Corrosion of silicon-based ceramics in combustion environments,” J. Eur. Ceram. Soc., 76, 3 – 28 (1993).CrossRef

15.

D. Shaoming, “Preparation of SiC/SiC composites by hot pressing, using Tyranno-SA fiber as reinforcement,” J. Am. Ceram. Soc., 86(1), 26 – 32 (2003).CrossRef

16.

G. Corman, R. Upadhyay, S. Sinha, et al., “General Electric company: selected applications of ceramics and composite materials,” Materials Research for Manufacturing (2016), pp. 59 – 91; DOI: https://doi.org/10.1007/978-3-319-23419-9 3.

17.

G. Corman, “Melt infiltrated composites (HIPERCOMP) for gas turbine engine applications,” in: GE Global Research High Temperature and Structural Ceramics Laboratory Niskayuna, New York (2006); DOI: https://doi.org/10.2172/936318.

18.

G. Corman, “Melt infiltrated ceramic matrix composites for shrouds and combustor liners of advanced industrial gas turbines, Final report,” in: GE Global Research Advanced Ceramics Laboratory Niskayuna, New York (2010); DOI: https://doi.org/10.2172/1004879.

19.

T. D. Karimbaev, M. A. Mezentsev, and A. Yu. Eezhov, “R&D experimental studies of nonmetallic details and assemblies of the hot part of an advanced gas turbine engine,” Vest. Samar. Gos. Aerokos. Univer., 14(3), Part 1, 128 – 138 (2015).CrossRef

20.

E. P. Simonenko, N. P. Simonenko, A. V. Derbenev, and V. A. Nikolaev, “Synthesis of nanocrystalline silicon carbide using sol-gel method,” Zh. Neorg. Khim., 58(13), 1279 – 1488 (2013); DOI: https://doi.org/10.7868/S0044457X1310022X.CrossRef

21.

R. R. Naslain, “Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview,” Comp. Sci. Technol., 64, 155 – 170 (2004).CrossRef

22.

E. P. Simonenko, N. P. Simonenko, V. G. Sevastyanov, et al., “Functional-gradient composite SiC/(ZrO₂–HfO₂–Y₂O₃) obtained using a sol-gel method,” Komp. Nanostrukt., No. 4, 52 – 64 (2011).

23.

R. R. Naslain, “Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview,” Comp. Sci. Technol., 64, 155 – 170 (2004); DOI: https://doi.org/10.1016/S0266-3538(03)00230-6. CrossRef

24.

O. Yu. Sorokin, S. St. Solntsev, S. A. Evdokimov, and I. V. Osin, “Method of hybrid spark plasma sintering: principle, possibilities, prospects of application,” Aviats. Mater. Tekhnol., No. S6, 11 – 16 (2014); DOI: https://doi.org/10.18577/2071-9140-2014-0-s6-11-16.CrossRef

25.

M. S. Boldin, N. V. Sakharov, S. V. Shotin, et al., “Composite ceramics based on aluminum oxide obtained by the method of electropulse plasma sintering for tribological applications,” Vest. Nizhegorod. Univ. im. N. I. Lobachevskogo, No. 6(1), 32 – 37 (2012).

26.

V. N. Chuvildeev, M. S. Boldin, Ya. G. Dyatlova, et al., “A comparative study of hot pressing and high-speed electrowelded plasma sintering of Al₂O₃/ZrO₂/Ti powders (C, N),” Zh. Neorg. Khim., 60(8), 1088 (2015); DOI: https://doi.org/10.7868/S0044457X1508005X.CrossRef

27.

R. Naslain and R. Design, “Preparation and properties of nonoxide CMCs for application in engines and nuclear reactors: an overview,” Comp. Sci. Technol., 64, 155 – 170 (2004).CrossRef

28.

V. N. Chuvildeev,M. S. Boldin, Ya. G. Dyatlova, et al., “A comparative study of hot pressing and spark plasma sintering of Al₂O₃–ZrO₂–Ti powders (C, N),” Zh. Neorg. Khim., 51(10), (2015); DOI: https://doi.org/10.7868/S0002337X15090031.CrossRef

29.

E. N. Kablov, “Strategic directions for the development of materials and technologies for their processing for the period up to 2030,” Aviats. Mater. Tekhnol., No. S, 7 – 17 (2012).

Title: Investigation of the Properties of SiC–ZrB2-Based Ceramic Composite Materials Obtained by Spark Plasma Sintering
Authors: N. E. Shchegoleva
S. A. Evdokimov
S. Yu. Modin
F. N. Karachevtsev
Publication date: 08-11-2018
Publisher: Springer US
Published in: Glass and Ceramics / Issue 7-8/2018
Print ISSN: 0361-7610
Electronic ISSN: 1573-8515
DOI: https://doi.org/10.1007/s10717-018-0066-x

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 7-8/2018

Calcium Phosphate Ceramic in the System Ca(PO3)2–Ca2P2O7 Based on Powder Mixtures Containing Calcium Hydrophosphate

Structure Formation in Cellular Glass Based on Novocherkassk CHPP Ash-Slag Wastes

Rheological Properties of Ceramic Bodies and the Physical-Mechanical Indices of Acid-Resistant Materials Based on Nano-Technogenic Wastes from Petroleum Chemistry and Non-Ferrous Metallurgy and on Pyrophyllite

Porous Functional Coatings by Microarc Oxidation

Fiberglass Coating Technology for the Production of Water Attractions

Low-Temperature Co-Firing Ceramic Li2Zn3Ti4O12 Modified by Li2O–ZnO–B2O3 Eutectic Additive

Premium Partners