Top

Wood Science and Technology

Published in:

01-03-2013 | Original

J-integral evaluation in cracked wood specimen using the mark tracking method

Authors: Octavian Pop, Frédéric Dubois, Joseph Absi

Published in: Wood Science and Technology | Issue 2/2013

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In this paper, an experimental analysis of the fracture parameters via the invariant J-integral for a cracked specimen made of wood is presented. The experimental test is realized using a sample made of Douglas fir loaded in opening mode. The sample geometry is a mix between the single edge notch and wedge splitting specimens, and the crack advances in the radial-longitudinal system, parallel to the wood rings. By using the optical mark tracking method, the displacement field evolution close to the crack tip is recorded during the test. The stress and strain fields are calculated using a finite element model generated from the experimental displacement fields. Further, the energy release rate is evaluated for different circular paths or crowns defined around the crack tip and for different loading values.

previous article Effect of thermal treatment on properties of OSB panels

next article Advanced wireless sensors for termite detection in wood constructions

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Anderson TS (2005) Fracture mechanics. CRC Press, Boca Raton, FL

Barsoum RS (1976) On the use of isoparametric finite elements in linear fracture mechanics. Int J Numer Methods Eng 10:25–37CrossRef

Bathe J, Klaus J (1982) Finite element procedures in engineering analysis. Prentice-Hall, Englewood Cliffs, NJ

Bretagne N, Valle V, Dupre JC (2005) Development of the marks tracking technique for strain field and volume variation measurements. NDT&E Int 38:290–298CrossRef

Broek D (1974) Elementary engineering fracture mechanics. Kluwer, Dordrecht

Brühwiler E, Wittmann HS (1990) The wedge splitting test, a new method of performing stable fracture mechanics tests. Eng Fract Mech Special Issue Fract Damage Concr Rock 35(1–3):117–125CrossRef

Budiansky B, Rice JR (1973) Conservation laws and energy-release rates. ASME J Appl Mech 40:201–203CrossRef

Cherepanov GP (1962) The stress in a heterogeneous plate with slits, in Russian, Izvestia AN SSSR, OTN, Mekhan. I Mashin 1:131–137

Cherepanov GP (1979) Mechanics of brittle fracture. McGraw-Hill, New York

Gross B, Srawley JE (1965) Stress-intensity factors for single-edge-notch specimens in bending or combined bending and tension by boundary collocation of a stress function. NASA technical note

Guitard D (1987) Mechanics of wood material and composites (In French), Cepadues—Editions

Henshell RD, Shaw KG (1975) Crack tip elements are unnecessary. Int J Numer Methods Eng 9:495–507CrossRef

Hild F, Roux S (2006) Measuring stress intensity factors with a camera: integrated digital image correlation (I-DIC). Comptes Rendus Mécanique 334(1):8–12CrossRef

Hussain F, Nairn J, Muszynski L (2011) An experimental method for measurement of strain distribution between wood the flour particles and polymer matrix on micro-mechanical level. Mater Sci Eng, A 528:6072–6078CrossRef

Lanczos C (1970) The variational principles of mechanics, 4th edn. Dover Publications, New York

Le Fichoux E (1998) Presentation and use of Castem 2000 (In French), ENSTA-LME

Miyauchi K, Murata K (2007) Strain-softening behavior of wood under tension perpendicular to the grain. J Wood Sci 53:463–469CrossRef

Orosz K, Täljsten B (2009) Development of a new test method for mineral based composites—wedge splitting test. In: Alexander et al (eds) Concrete repair, rehabilitation and retrofitting II. Taylor & Francis Group, London

Orteu JJ (2009) 3-D computer vision in experimental mechanics. Opt Laser Eng 47:282–291CrossRef

Post D (1993) Moire interferometry. In: Kobayashi AS (ed) Handbook on experimental mechanics. VCH Publishers Inc, New York, pp 297–405

Réthoré J, Roux S, Hild F (2008) Noise-robust stress intensity factor determination from kinematic field measurements. Eng Fract Mech 75:3763–3781CrossRef

Réthoré J, Roux S, Hild F (2009) An extended and integrated digital image correlation technique applied to analysis fractured samples. Eur J Comput Mech 18:285–306

Rice JR (1968) A path independent integral and the approximate analysis of strain concentration by notches and cracks. J Appl Mech 35:379–386CrossRef

Sanford RJ (1982) Fracture mechanics. ASTM STP 833

Smith I, Landis E, Gong M (2003) Fracture and fatigue in wood. Wiley, New York

Sutton MA, Wolters WJ, Peters WH, Ranson WF, McNeil SR (1983) Determination of displacements using an improved digital correlation method. Image Vision Comput 1(3):133–139CrossRef

Sutton MA, Cheng MQ, Peters WH, Chao YJ, McNeill SR (1986) Application of an optimized digital correlation method to planar deformation analysis. Image Vision Comput 4(3):143–151CrossRef

Sutton MA, Yan JH, Tiwari V, Schreier HW, Orteu JJ (2008) The effect of out-of-plane motion on 2D and 3D digital image correlation measurements. Opt Laser Eng 46(10):746–757CrossRef

Vujanovic BD, Atanackovic TM (1930) An introduction to modern variational techniques in mechanics. Birkhäuser, Switzerland

Wells A, Post D (1958) The dynamic stress distribution surrounding a running crack—a photoelastic analysis. Proc Soc Exp Stress Anal 16:69–92

Yoneyama S, Morimoto Y, Takashi M (2003) Automatic determination method of stress intensity utilizing digital image correlation and nonlinear least squares. In: Abe M, Wu Z (eds) Structural health monitoring and intelligent infrastructure. Swet & Zeitlinger, Amsterdam, pp 1357–1424

Zienkiewicz OC, Taylor RL (2005) The finite element method for solid and structural mechanics. Elsevier Butterworth Heinemann, Amsterdam

Title: J-integral evaluation in cracked wood specimen using the mark tracking method
Authors: Octavian Pop
Frédéric Dubois
Joseph Absi
Publication date: 01-03-2013
Publisher: Springer-Verlag
Published in: Wood Science and Technology / Issue 2/2013
Print ISSN: 0043-7719
Electronic ISSN: 1432-5225
DOI: https://doi.org/10.1007/s00226-012-0488-5

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Other articles of this Issue 2/2013

Fire retardancy and CO/CO2 emission of intumescent coatings on thin plywood panel with waterborne vinyl acetate-acrylic resin

Effect of thermal treatment on properties of OSB panels

Annual meeting of IAWS 21–24 October 2013, Nanjing, China

Evaluation of the photo stabilising efficiency of clear coatings comprising organic UV absorbers and mineral UV screeners on wood surfaces

Nondestructive evaluation of drying stress level on wood surface using near-infrared spectroscopy

Advanced wireless sensors for termite detection in wood constructions