Issue 3/2014
Content (26 Articles)
Computed-Tomography-Based Analysis of Voids in SnBi57Ag1 Solder Joints and Their Influence on the Reliability
Miriam Rauer, Antje Volkert, Timo Schreck, Stefan Härter, Michael Kaloudis
Macropitting in Microsegregated Induction-Hardened Gear Tooth
Nicholas Bantz
Corrosion Failure Analysis of a Condenser on the Top of Benzene Tower in Styrene Unit
Y. G. Zheng, G. Q. Liu, Y. M. Zhang, H. X. Hu, Q. N. Song
Fatigue Failure of LP Compressor Blade in an Aero Gas Turbine Engine
R. K. Mishra, Johney Thomas, K. Srinivasan, Syed Iftekar Ahmed
Premature Failure of Ductile Iron Pump Impeller in Cooling Tower System
Pankaj Sharma
Stress Corrosion Cracking of Ring Type Joint of Reactor Pipeline of a Hydrocracker Unit
Poorwa Gore, M. Sujata, S. K. Bhaumik
Microbiological-Influenced Corrosion Failure of a Heat Exchanger Tube of a Fertilizer Plant
Pankaj Sharma
Training
Events
Oxidation Resistance of Polypropylene Random Copolymer Pipe to Chlorinated Water
Donald Duvall
Fracture Surface Analysis of 3D-Printed Tensile Specimens of Novel ABS-Based Materials
Angel R. Torrado Perez, David A. Roberson, Ryan B. Wicker
A New Spectral Average-Based Bearing Fault Diagnostic Approach
Brandon Van Hecke, Yongzhi Qu, David He, Eric Bechhoefer
Use of Spectral Kurtosis for Improving Signal to Noise Ratio of Acoustic Emission Signal from Defective Bearings
C. Ruiz-Cárcel, E. Hernani-Ros, Y. Cao, D. Mba
Microscopic Analysis of Fractured Screws Used as Implants in Bone Fixation
Cassio Barbosa, Ibrahim de Cerqueira Abud, Tatiana Silva Barros, Sheyla Santana de Carvalho, Ieda Maria Vieira Caminha
Failure Analysis: Sulfide Stress Corrosion Cracking and Hydrogen-Induced Cracking of A216-WCC Wellhead Flow Control Valve Body
S. M. R. Ziaei, A. H. Kokabi, J. Mostowfi
Strength Evaluation of Concrete Made with Dug-up Gravel from Southwestern Nigeria
Akinropo Musiliu Olajumoke, Fola Lasisi
Risk-Based Inspection of a Crude Oil Import/Export Line: The Corrosion Engineer’s Role
D. Ifezue, F. H. Tobins
Fatigue Fracture of a Locomotive Diesel Engine Cardan-Shaft
Zhi-wei Yu, Xiao-lei Xu
Residual Capacity Estimation for Lead–Acid Batteries Used in Automobiles by the Method of Median Internal Resistance
Shang-Kuo Yang, Chih-Yung Huang
Failure Analysis of a Corroded Threaded Fitting in an Ammonia Refrigeration System
S. A. Sanders, M. E. Stevenson, G. J. Novak, R. Pape
Unification of Common Cause Failures’ Parametric Models Using a Generic Markovian Model
Mourad Chebila, Fares Innal