Issue 6/2011
Content (51 Articles)
Optical and structural investigations on iron-containing phosphate glasses
M. Elisa, R. Iordanescu, B. A. Sava, G. Aldica, V. Kuncser, C. Valsangiacom, G. Schinteie, F. Nastase, C. Nastase, V. Bercu, A. Volceanov, S. Peretz
Preparation and properties of hollow silica tubes/cyanate ester hybrids for high-frequency copper-clad laminates
Dongxian Zhuo, Aijuan Gu, Guozheng Liang, Jiang-tao Hu, Li Yuan
Structure and ferroelectric properties of stoichiometric and Sr-deficient–SrBi4Ti4O15 thin films
Hui Sun, Xiao-bing Chen
Synthesis of potassium niobate (KNbO3) nano-powder by a modified solid-state reaction
Nopsiri Chaiyo, Anucha Ruangphanit, Rangson Muanghlua, Surasak Niemcharoen, Banjong Boonchom, Naratip Vittayakorn
In vitro remineralization of human dental enamel by bioactive glasses
Zhihong Dong, Jiang Chang, Yue Zhou, Kaili Lin
Suppression of phase transitions in Pd thin films by insertion of a Ti buffer layer
Kyung Rae Kim, Jin-Seo Noh, Jun Min Lee, Youn Joo Kim, Wooyoung Lee
Characterization of an AlN buffer layer and a thick-GaN layer grown on sapphire substrate by MOCVD
S. Çörekçi, M. K. Öztürk, A. Bengi, M. Çakmak, S. Özçelik, E. Özbay
Sb-doped CuAlO2: widening of band gap and nonlinear J–E characteristics
C. K. Ghosh, S. R. Popuri, D. Sarkar, K. K. Chattopadhyay
Influence of Ti, B and Sr on the microstructure and mechanical properties of A356 alloy
D. G. Mallapur, S. A. Kori, K. Rajendra Udupa
Effects of high magnetic fields on solidification microstructure of Al–Si alloys
Tie Liu, Qiang Wang, Hong-Wei Zhang, Chang-Sheng Lou, Keiji Nakajima, Ji-Cheng He
Structural and electronic properties of 0.5 ML sulfur adsorbed on the GaP(001) surface
D. F. Li, B. L. Li, H. Y. Xiao, Z. G. Wang, H. N. Dong, X. T. Zu
Synthesis of manganese–zinc ferrite by powder mixing using ferric oxide from a steel mill acid recovery unit
S. S. Marins, T. Ogasawara, L. M. Tavares
Photocatalytic activity of polypyrrole/TiO2 nanocomposites under visible and UV light
Qingzhi Luo, Xueyan Li, Desong Wang, Yanhong Wang, Jing An
Monoclinic effects and orthotropic estimation for the behaviour of rolled sheet
O. Chahaoui, M. L. Fares, D. Piot, F. Montheillet
Solid-state precipitation of stable and metastable layered compounds in thermoelectric AgSbTe2
J. D. Sugar, D. L. Medlin
Effect of heating rate on the microstructural and magnetic properties of nanocrystalline Fe81Si4B12P2Cu1 alloys
M. Guo, Y. G. Wang, X. F. Miao
Time-dependent reinforcement effect of nanoclay in rubber nanocomposites
H. H. Le, Z. Ali, S. Ilisch, H.-J. Radusch
The relationship of crystallization behavior, mechanical properties, and morphology of polypropylene nanocomposite fibers
Tawat Soitong, Jantrawan Pumchusak
Effect of thermal treatment on hardness and fracture toughness of a poly-para-phenylene-copolymer
K. Friedrich, A. A. Almajid, A. Noll, T. Burkhart
Ceramic/natural rubber composites: influence types of rubber and ceramic materials on curing, mechanical, morphological, and dielectric properties
Subhan Salaeh, Nantakan Muensit, Pornsuda Bomlai, Charoen Nakason
Effect of pretreatment of bagasse fibers on the properties of chitosan/microfibrillated cellulose nanocomposites
Mohammad L. Hassan, Enas A. Hassan, Kristiina N. Oksman
Synthesis, characterization of novel silicotungstic acid incorporated SPEEK/PVA-co-ethylene-based composite membranes for fuel cell
Baskar Ramaganthan, P. M. Sivakumar, Sangeetha Dharmalingam
Influence of the size-controlled TiO2 nanotubes fabricated by low-temperature chemical synthesis on the dye-sensitized solar cell properties
Jang-Yul Kim, Tohru Sekino, Shun-Ichiro Tanaka
Effect of annealing process in water on the essential work of fracture response of ultra high molecular weight polyethylene
Sinan Yilmaz, Taner Yilmaz, A. Armagan Arici
Multi-length scale modeling and analysis of microstructure evolution and mechanical properties in polyurea
Mica Grujicic, B. Pandurangan, A. E. King, J. Runt, J. Tarter, G. Dillon
TEM observation of growth and phase transformation in nanometer-sized titanium oxide powder
Gwan-Hyoung Lee, Jian-Min Zuo
Microstructure and mechanical properties of V–Ti–N microalloyed steel used for fracture splitting connecting rod
Xianzhong Zhang, Qizhou Cai, Guifeng Zhou, Qingfeng Chen, Yuzhang Xiong
Synthesis and characterizations of novel acid functionalized and fluorescent poly(ε-caprolactone)
Hung-Hsia Chen, R. Anbarasan, Long-Sheng Kuo, Ping-Hei Chen
Phase formation and dielectric properties of Ba0.5Sr0.5TiO3 by slow injection sol–gel technique
R. Balachandran, H. K. Yow, B. H. Ong, K. B. Tan, K. Anuar, W. T. Teoh, M. N. Ahmad Fauzi, S. Sreekantan, V. Swaminathan
Study of curing process of glass fiber and epoxy resin composite by FT-NIR, photoacoustic spectroscopy and luminescence spectroscopy
R. C. M. Sales, M. F. Diniz, R. C. L. Dutra, G. P. Thim, D. Dibbern-Brunelli
Stabilization of metastable tetragonal zirconia nanocrystallites by surface modification
M. Skovgaard, K. Almdal, A. van Lelieveld
Dominancy of antiferromagnetism in Zn1−x Co x O diluted magnetic semiconductors
Musa Mutlu Can, Tezer Fırat, Şadan Özcan
Poling field versus piezoelectric property for [001] c oriented 91%Pb(Zn1/3Nb2/3)O3–9%PbTiO3 single crystals
Yang Xiang, Rui Zhang, Wenwu Cao
Preparation and characterization of olivary carbon by pyrolysis of ethanol with the manganese acetate as promoter via solvothermal method
Wenqi He, Yong Xiao, Jialiang Cheng, Guandong Wei, Shuai Zhao, Guangui Yi, Yingliang Liu
Synthesis and characterization of composite membrane by deposition of acrylic acid plasma polymer onto pre-treated polyethersulfone support
Betina Villagra Di Carlo, Juan Carlos Gottifredi, Alberto Claudio Habert
Carbon nanofibers prepared by a novel co-extrusion and melt-spinning of phenol formaldehyde-based core/sheath polymer blends
Kuo-Kuang Cheng, Tzu-Chien Hsu, Li-Heng Kao
Growth mechanism and multiphoton-induced photoluminescence of crownlike zinc oxide
G. P. Zhu, C. X. Xu, J. Zhu, M. H. Wang
Structural, optical, electrical properties and FTIR studies of fluorine doped SnO2 films deposited by spray pyrolysis
B. Zhang, Y. Tian, J. X. Zhang, W. Cai
Studies on the friction and wear characteristics of rubber-based friction materials containing carbon and cellulose fibers
Akbar Shojaei, Mohammad Arjmand, Amir Saffar
Solution for the critical thickness models of dislocation generation in epitaxial thin films using the Lambert W function
Chokri Hadj Belgacem, Mustapha Fnaiech
Polymer matrix–clay interaction mediated mechanism of electrical transport in exfoliated and intercalated polymer nanocomposites
A. L. Sharma, Awalendra K. Thakur
Sol–gel synthesis, densification, and electrical properties of CuO–B2O3 doped Ba6−3x R8+2x Ti18O54 (R = Nd) microwave dielectric ceramics
Yang Wu, Ruzhong Zuo, Yuanyuan Zhou, Zhenxing Yue
Shear deformation and grain refinement during accumulative back extrusion of AZ31 magnesium alloy
S. M. Fatemi-Varzaneh, A. Zarei-Hanzaki, S. Izadi
Aluminum-based composites reinforced with SiC particles and NiTi fibers: influence of fiber dimensions and aging time on mechanical properties
Zariff Chaudhury, Mohammad Hailat, Yi Liu, Golam Newaz
Fabrication of dense β-calcium orthophosphate with submicrometer-sized grains and its high-temperature superplastic deformation
Daisuke Watanabe, Keishi Nishio, Yoshio Sakka, Masataka Ohgaki, Ian J. Davies, Tomohiro Umeda, Seiichiro Koda, Kiyoshi Itatani
Ductile-to-brittle transition in cenosphere-filled polypropylene composites
Bhabani K. Satapathy, Arijit Das, Amar Patnaik