Issue 1/2010
Content (35 Articles)
Development of nutation motors (improvement of pneumatic nutation motor by optimizing diaphragm design)
Shinji Oda, Koichi Suzumori, Kazuo Uzuka, Isao Enomoto
A study on the bending stress of the hollow sun gear in a planetary gear train
Kyung-Eun Ko, Do-Hyeong Lim, Pan-Young Kim, Jinsoo Park
Nanotribological properties of silicon nano-pillars coated by a Z-DOL lubricating film
Duc Cuong Pham, Kyunghwan Na, Sungwook Yang, Jinseok Kim, Eui-Sung Yoon
Friction and wear properties of rice husk ceramics under dry condition
Tuvshin Dugarjav, Takeshi Yamaguchi, Kei Shibata, Kazuo Hokkirigawa
Assessment of adhesion between thin film and silicon based on a scratch test
Jung-Eun Lee, Hyun-Joon Kim, Dae-Eun Kim
Surface durability of WC/C-coated case-hardened steel gear
Masahiro Fujii, Masanori Seki, Akira Yoshida
Nanomechanical characteristics at an ultra-small particle-surface contact interface
In-Ha Sung, Hung-Gu Han, Hosung Kong
Sensitivity study of frictional behavior by dimensional analysis in cold forging
Joseph S. Ajiboye, Ki-Ho Jung, Yong-Taek Im
Parametric study on mechanical clinching process for joining aluminum alloy and high-strength steel sheets
Chan-Joo Lee, Jae-Young Kim, Sang-Kon Lee, Dae-Cheol Ko, Byung-Min Kim
Application of flexible forming process to hull structure forming
Seong-Chan Heo, Young-Ho Seo, Jung-Won Park, Tae-Wan Ku, Jeong Kim, Beom-Soo Kang
Optimal injection molding conditions considering the core shift for a plastic battery case with thin and deep walls
Dong-Gyu Ahn, Dae-Won Kim, Yeol-Ui Yoon
Eliminating weldlines of an injection-molded part with the aid of high-frequency induction heating
Keun Park, Dong-Hwi Sohn, Kwang-Hwan Cho
Indirect cutting force measurement in the micro end-milling process based on frequency analysis of sensor signals
Bong-Cheol Shin, Seok-Jae Ha, Myeong-Woo Cho, Tae-Il Seo, Gil-Sang Yoon, Young-Moo Heo
Fabrication and evaluation of various types of micro one-way valves through micro rubber molding process
Yuki Uohashi, Koichi Suzumori, Hironari Taniguchi
Vibration transmissibility reduction module with flexure mechanism for personal tools
Donghyun Hwang, Deuk-Kyu Lee, Jaehwa Jeong, Moon G. Lee
The effects of glass fiber reinforcement on the mechanical behavior of polyurethane foam
Dae-Suk Han, In-Beom Park, Myung-Hyun Kim, Byeong-Jae Noh, Wha-Soo Kim, Jae-Myung Lee
Study on recycling of waste water from spent water-soluble coolant
Kazuya Takada, Yasuo Kondo, Kenji Yamaguchi, Satoshi Sakamoto
Selection of an optimized method for pitting processes with sustainability as an important factor
Ryuichi Saitoh, Hiroki Yamakiri, Tsuneo Kurita, Shinsuke Kondoh, Nozomu Mishima, Shinya Sasaki
An application of ESD technology for the R2R printing process
Jung Su Kim, Kyung Hyun Choi, Kang Dae Kim, Chung Hwan Kim, Sung Woo Bae, Dong Soo Kim
Simulation of droplet generation through electrostatic forces
Khalid Rahman, Jeong-Beom Ko, Saleem Khan, Dong-Soo Kim, Kyung-Hyun Choi
Steering guide-based lateral control for roll-to-roll printed electronics
Hyeunhun Shin, Thanhtam Ho, Sangyoon Lee
Optimum suspension unit design for enhancing the mobility of wheeled armored vehicles
Eun-Ho Choi, Jae-Bong Ryoo, Jin-Rae Cho, O.-Kaung Lim
Novel design of a small field robot with multi-active crawlers capable of autonomous stair climbing
Byeong-Sang Kim, Quy-Hung Vu, Jae-Bok Song, Chung-Hyuk Yim
Stiffness modeling of a family of 6-DoF parallel mechanisms with three limbs based on screw theory
Bing Li, Hongjian Yu, Zongquan Deng, Xiaojun Yang, Hong Hu
Effect of boost pressure on thermal stratification in HCCI engine using the multi-zone model
O. Seok Kwon, Ock Taeck Lim
Behavior of thermal bubbles formed from a single nucleation site
Young Soo Chang, Kwang-Hun Jeong, Heon Ju Lee, Yoon Pyo Lee, Ho-Young Kim