Issue 11/2023
Content (53 Articles)
Sustainable 3D printing with recycled materials: a review
- Invited Review Article
Shivani Lodha, Bo Song, Sang-In Park, Hae-Jin Choi, Sang Won Lee, Hyung Wook Park, Seung-Kyum Choi
Ultrasonic atomization of magnesium alloy AZ61 based on the TIG melting method
- Original Article
Jan Jaros, Daniel Koutny, Lenka Klakurkova, Stefan Gneiger, Sascha Senck
Influence of process parameters on temperature field and residual strain in FFF-printed parts
- Original Article
Alberto Corvi, Luca Collini, Corrado Sciancalepore, Adrian Lutey
Strategies for wire arc additive manufacturing of thin walls and overhangs
- Original Article
Jakub Slavíček, Jakub Franke, Jan Jaroš, Daniel Koutný
Penetration testing of 3D printed projectiles made of various types of polymers
- Original Article
Muhamed Bisić, Faruk Razić, Adi Pandžić, Mustafa Bevrnja
Manufacturing parameter influence on FDM polypropylene tensile properties
- Original Article
Aleksa Milovanović, Zorana Golubović, Snežana Kirin, Tomáš Babinský, Ivo Šulák, Miloš Milošević, Aleksandar Sedmak
Printing orientation influence on tensile strength of PA12 specimens obtained by SLS
- Original Article
Ivana Jevtić, Zorana Golubović, Goran Mladenović, Filippo Berto, Aleksandar Sedmak, Aleksa Milovanović, Miloš Milošević
Static and fatigue behavior of 3D printed PLA and PLA reinforced with short carbon fibers
- Original Article
Estera Vălean, Pietro Foti, Seyed Mohammad Javad Razavi, Filippo Berto, Liviu Marșavina
Experimental setup for testing climatic stress component in vegetation via AM: challenges and new opportunities
- Original Article
Ozge Ogut, Ole Emil Herrmann, Chao Gao, Nerantzia Julia Tzortzi, Chiara Bertolin
Determination of the influence of infill pattern and fiberglass reinforcement on the tensile properties of additively manufactured material by FDM technology
- Original Article
Marko Delić, Vesna Mandić, Srbislav Aleksandrović, Dušan Arsić
The influence of material infill on ABS-X flexural strength
- Original Article
Isaak Trajković, Aleksandra Dragičević, Ivana Medojević, Goran Mladenović, Miloš Milošević
Acoustic signal analysis for gear fault diagnosis using a uniform circular microphone array
- Original Article
Chi Li, Changzheng Chen, Xiaojiao Gu
A new hybrid method for bearing fault diagnosis based on CEEMDAN and ACPSO-BP neural network
- Original Article
Shanshan Song, Shuqing Zhang, Wei Dong, Xiaowen Zhang, Wei Ma
Optimal design of nuclear power plants containment with tuned mass damper inerter device for earthquake loadings
- Original Article
Guangcai Han, Yanhong Wu, Gangling Hou, Zhihua Yue
Numerical investigation of the dynamic response of a simplified floating structure subjected to two underwater explosion bubbles
- Original Article
Xudong Jiang, Yuxiang Wang, Cheng Sun
Transverse vibration of the boring bar for BTA deep hole machining under stochastic excitation
- Original Article
Quanbin Zhang, Wu Zhao, Yamin Li, Shuangxi Jing
Lightweight fault diagnosis method in embedded system based on knowledge distillation
- Original Article
Ran Gong, Chenlin Wang, Jinxiao Li, Yi Xu
Multi-objective optimization of multi-axle heavy duty vehicle ride comfort and handling stability based on analytical target cascading method
- Original Article
Yimeng Fu, Xiaojun Zhou
Theoretical analysis of non-linear dynamic response of a bridge pier under two-phase flow excitation
- Original Article
Loic Z. Ngou, Hyacinthe K. Simo, Benjamin K. Lekama, Serge I. Fewo, Yves C. Mbono Samba
Characteristics of vibration response of ball bearing with local defect considering skidding
- Original Article
Yu Tian, Changfeng Yan, Yaofeng Liu, Wei Luo, Jianxiong Kang, Zonggang Wang, Lixiao Wu
A structural response reconstruction method based on a continuous-discrete state space model
- Original Article
Fanghua Chen, Zhenrui Peng
Free vibration analysis of functionally graded plates with different porosity distributions and grading patterns
- Original Article
Xuchu Hu, Tao Fu
Transfer path analysis using deep neural networks trained by measured operational responses
- Original Article
Dooho Lee, Yun-Yeong Park
Rotational behavior of carbodies and design improvement for a mountain tram running on sharply curved roads
- Original Article
Sungil Seo, Jea Hoon Yeon
Adaptive range selection for parameter optimization of VMD algorithm in rolling bearing fault diagnosis under strong background noise
- Original Article
Ziyou Zhou, Wenhua Chen, Ce Yang
Fourier ptychographic microscopy utilizing chromatic aberration for extended depth of field
- Original Article
Soo Hwan Seo, Hyun Choi
Design of a lateral active suspension controller for railway vehicles: a focus on ride comfort and perturbations
- Original Article
Jungwan Park, Hyunseok Yang
Individual drive cross-coupled control system to compensate for measurement time-delay for roll-to-roll contact pressure uniformization
- Original Article
Daehyeon Kim, Youngjin Kim, Hyeongrae Kim, Juyeon Kim, Jongmo Kang, Yuchang Choi, Dongho Oh
Weibull parameter estimation and reliability analysis with small samples based on successive approximation method
- Original Article
Jin Guo, Xiangwei Kong, Ningxiang Wu, Liyang Xie
Evaluation of the mechanical properties of aircraft composite materials after indentation
- Original Article
Marius Jatulis, Eltahry Elghandour, Nagwa Elzayady
Acoustic characteristic of bio-composite micro-perforated panel (BC-MPP) backed with natural fiber
- Original Article
Faridah Wahab, Tan Wei Hong, Mohamad Haziman Mohamad Azhar, Nor Hafizul Hilni Abdul Rahman
Multi-objective optimization of a co-rotating twin-screw gear transmission system based on heuristic search
- Original Article
Mingzhu Hu, Haixia Wang, Peitang Wei, Genshen Liu, Lei Zhang, Zhiqiang He, Huaiju Liu
Variable speed sliding mode control of magnetic suspension linear synchronous motor based on feedback linearization
- Original Article
Yunpeng Sun, Yipeng Lan, Xiaolei Shi, Zelai Xu, Cheng Lei
Morphological, microstructural, and mechanical study of FGM coatings prepared using the HVOF technique
- Original Article
Prabhat Ranjan, Rajesh Kumar, R. S. Walia
Study on the transient coupling of flow characteristics and heat transfer for a reciprocating piston oil-injection cooling
- Original Article
Hong Wang, Hancong Xu, Jialong Li, Zhanpeng Zhou
Analysis of extreme wall-shear stress and vortical structure through direct numerical simulation of transitional flow in a stenosed carotid artery
- Original Article
Dongmin Kim, Jinyul Hwang, Too-Jae Min, Won-Min Jo
Effects of Reynolds number on the flow field in a low-pressure turbine with incoming wakes
- Original Article
Xu Zhao, Yunfei Wang, Xiaozhong Ma, Yaowen Zhang, Long Yue, Bin Zheng
Effect of initial velocity distribution and Reynolds number on two-dimensional wall jet of transition region impinging
- Original Article
Gentaro Takeda, Yu Ito, Kenji Yamashiro, Hideyuki Takahashi, Nao Ninomiya, Jurai Fujikura, Shun Akutsu
Parametric study of a projectile launched by a compressed air cannon
- Original Article
Woojin Sung, Jihoon Kim, Kyeong sik Jang, Thi Thanh Giang Le, Jeonglae Kim, Dong Hyeon Kim, Hyoungsoon Lee, Jaiyoung Ryu
Research on active flow control to reduce aerodynamic drag of mira notchback model
- Original Article
Yingchao Zhang, Ruizhuo Zhou, Jinji Li, Hui Zhu, Haipeng Liu, Zhe Zhang, Chengchun Zhang
Investigation on quasi-static and dynamic mechanical properties of disc springs considering asymmetric frictional boundary
- Original Article
Yanfeng Zhou, Dan Wang, Jianyuan He, Weifang Chen, Rupeng Zhu
Characteristics of triangle in triangulated cylindrical origami with axial load test for space deployable structures
- Original Article
Divlan Audie Sentanu, Muhammad Akhsin Muflikhun
A rapid prediction method for the stiffness and the machining accuracy evaluation of a parallel kinematic mechanism
- Original Article
Mengrui Shi, Hao Li, Shipeng Li, Xuda Qin, Haitao Liu
Additive manufacturing processes and materials for spare parts
- Original Article
Salmi Mika, Eujin Pei
Determination of line heating conditions for plate forming using the strain directed boundary method based on deformation superposition
- Original Article
Hee-Chan Yoon, Hong-Jun Noh, Young-Hwan Han, Hun-Bong Lim, Hyun-Ik Yang
Decision of impedance-based scaling factor for workspace mapping in teleoperation
- Original Article
Taemun Park, Hak Yi
Effect of operating and geometrical parameters on real-time thermal effectiveness of closed-loop borehole heat exchangers in GSHP application
- Original Article
Satish Kumar, K. Murugesan
Unsteady analysis of a solar air heater with sensible heat storage using 2D finite difference approximation
- Original Article
Nguyen Minh Phu, Lai Hoai Nam, Nguyen Le Hong Son
Recoil reduction and projectile velocity improvement design of recoilless gun with combustible cartridge
- Original Article
Pengzhan Liu, Guoqiang Wang, Zhen Yang, Xiongfei Zhao
Development of a 1D solution algorithm to predict ejector performance in high altitude wind tunnels
- Original Article
Hyunwoo Park, Sang Hun Kang
Design and assessment of short-in-length shape transition hypersonic inlet with circular throat
- Original Article
Changwon Lim, Sangwook Jin, Gisu Park
Experimental investigation of non-condensable gas effects in a natural circulation system
- Original Article
Dahoon Jeong, Seyeon Hwang, Hyewon Kim, Juheon Kim, Hyungmo Kim
Noninvasive measurement of body temperature distribution during radiofrequency hyperthermia for cancer treatment
- Original Article
Ki Sun Park, M. Tamim Hossain, Jung Kyung Kim, Hee Joon Lee
