Landfill Base Liners: Assessment of Material Equivalency and Impact to Groundwater

This paper gathered available flow and transport solutions and used them for two composite liners, consisting of geomembrane (GM) overlying either a compacted clay liner (CCL) or a geosynthetic clay liner (GCL). Its aim is to provide a guiding framework for the possible choices of (a) approaches to bottom liner design, (b) respective analytical solutions to flow and transport equations, as well as (c) parameters required for each type of solution. On the basis of the obtained results, the following recommendations are made. When the goal of analysis is to determine material equivalency, leachate flow rate is an adequate key parameter for GM-CCL composite liners. For GM-GCL composite liners, it is necessary to compute contaminant concentration or mass flux, considering (a) transport through defects for inorganic contaminants and (b) diffusion and the contribution of any available attenuation layer for organic contaminants. When the goal of analysis is to assess impact to groundwater, it is advised to calculate both discharge rate and contaminant mass flux regardless of liner type. The critical parameter for the transport calculations is the retardation factor of the contaminant, for the case of CCLs, while the results for GCLs are much less sensitive to this parameter.