Top

Glass and Ceramics

Published in:

29-05-2021

Laser Drilling of Porous Aluminum Silicate Ceramics

Authors: Ya. S. Fironov, I. V. Mel’nikov, E. R. Nadezhdin, V. N. Tokarev

Published in: Glass and Ceramics | Issue 1-2/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The features of laser drilling of highly porous composite ceramics consisting of aluminosilicate, glass, and a small addition of polystyrene (EPS) were studied experimentally. It was found that the formation of a liquid phase can contribute to the strengthening of ceramics. A list of factors determining the dynamics of hole formation is proposed. These include not only heating, melting, ablation, and ejection, previously known for metals and dense ceramics, but also a number of others: boiling-up of the mixture component with the lowest temperature of thermal decomposition and its departure from the affected zone; melt of less volatile components; compaction of ceramic adjoining the walls; glass transition of the liquid phase on cooling after irradiation. These effects depend on the density of the composite as well as on the viscosity of the liquefied material.

previous article Low-Fired Electrotechnical Porcelain with Diopside Additives

next article Use of Different Types of Aluminum-Containing Raw Materials in Type-E Fiber Production

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

P. Whiteley, H. D. Russman, and J. D. Bishop, “Porosity of building materials. A collection of published results,” J. Oil Col. Chem. Assoc., 60, 142 – 150 (1977).

P. A. M. Najar, M. T. Nimje, S. U. Bagde, et al., “Development of lightweight foamed bricks from red mud,” in: Bauxite, Alumina and Aluminium Industry of Asia Conference (2012).

Toru Shimizua, Kazuhiro Matsuura, Harumi Furue, and Kunio Matsuzak, “Thermal conductivity of high porosity alumina refractory bricks made by a slurry gelation and foaming method,” J. Eur. Ceram. Soc., 33, 3429 – 3435 (2013). URL: http://dx.doi.org/https://doi.org/10.1016/j.jeurceramsoc.2013.07.001

E. M. Bernal, M. Vlasova, P. A. M. Aguilar, et al., “Synthesis and properties of porous ceramics obtained with the use of spherical expanded polystyrene particles of packaging material,” Sci. Sint., 2020 (in press).

Yulong Yang, Fengli Liu, Qibing Chang, et al., “Preparation of fly ash-based porous ceramic with alumina as the pore-forming agent,” Ceramics, 2, 286 – 295 (2019). doi: https://doi.org/10.3390/ceramics2020023.CrossRef

S. Sarkar, S. Bandyopadhyay, A. Larbot, and S. Cerneaux, “New clay–alumina porous capillary supports for filtration application,” J. Membr. Sci., 392, 130 – 136 (2018). doi: https://doi.org/10.1016/j.memsci.2011.12.010.CrossRef

M. V. Twigg and J. T. Richardson, “Fundamentals and applications of structured ceramic foam catalysts,” Ind. Eng. Chem. Res., 46, 4166 – 4177 (2007).CrossRef

Hamdan Yahya, Mohd Roslee Othman, and Zainal Arifin Ahmad, “Effect of mullite formation on properties of aluminosilicate ceramic balls,” Proc. Chem., 19, 922 – 928 (2016). doi: https://doi.org/10.1016/j.proche.2016.03.136CrossRef

Chunbo Zhou, Xiaogang Mu, Youzhi Zhang, Xuanjun Wang, “Review on the research methods of the barrier and explosionproof properties of porous materials,” in: International Symposium on Mechanics, Structures and Materials Science (MSMS 2018), 2018_AIP Conf. Proc., 1995(1), 020003-1–020003-9; https: //doi.org/10.1063/1.5048734 Published by AIP Publishing. 978-0-7354-1711-3/$30.00

10.

I. Ya. Guzman and I. Ya. Guzman, “Certain principles of formation of porous ceramic structures: properties and applications (A review),” Glass Ceram., 60(9 – 10), 280 – 283 (2003) [Steklo Keram., No. 9, 28 – 31 (2003)].

11.

L. V. Morozova, A. E. Lapshin, and A. Drozdova, “Preparation and investigation of porous aluminosilicate ceramic materials,” Glass Phys. Chem., 34, 443 (2008). URL: https://doi.org/https://doi.org/10.1134/S1087659608040111

12.

J. Luyten, S. Mullens, J. Cooymans, et al., “Different methods to synthesize ceramic foams,” J. Eur. Ceram. Soc., 29, 829 – 832 (2009).CrossRef

13.

G. Burlak, M. Vlasova, P. A. M. Aguilar, et al., “Optical percolation in ceramics assisted by porous clusters,” Opt. Comm., 282, 2850 – 2856 (2009).CrossRef

14.

Ì. Vlasova, M. Kakazey, I. Mel’nikov, et al., “Formation of Cr_xC_yO_z coatings under laser ablation of Cr₂₃C₆ ceramics,” Surf. Coat. Technol., 349, 93 – 102 (2018).CrossRef

15.

M. Vlasova, M. Kakazey, A. P. Marquez, et al., “Laser corrosion of TiN–TiB₂ ceramics,” Res. Dev. Material Sci. RDMS, 10(2), 000731 (2019). doi: https://doi.org/10.31031/RDMS.2019.10.000731.CrossRef

16.

M. Vlasova, M. Kakazey, P. A. M. Aguilar, et al., “TiN–TiB₂ ñeramics degradation in the region of a steady-state laser heating,” Surf. Coat. Technol., 378, 124738 (2019).CrossRef

17.

M. V. Vlasova, M. G. Kakazey, I. V. Mel’nikov, et al., “Fiber-laser ablation of high-temperature TiN–TiB₂ ceramics for protective coating,” in: Laser Congress (ASSL, LAC, LS&C), OSA Technical Digest (Optical Society of America, 2019), paper JM5A.37 (2019). URL: https://doi.org/https://doi.org/10.1364/ASSL.2019.JM5A.37

18.

A. N. Volkov and L. V. Zhigilei, “Melt dynamics and melt-through time in continuous wave laser heating of metal films: Contributions of the recoil vapor pressure and Marangoni effects,” Int. J. Heat and Mass Transfer, 112, 300 – 317 (2017). URL: https://doi.org/https://doi.org/10.1016/j.ijheatmasstransfer.2017.04.100.

19.

R. Poprawe, W. Schulz, and R. Schmitt, “Hydrodynamics of material removal by melt expulsion: Perspectives of laser cutting and drilling,” Phys. Proc. A, 5, 1 – 18 (2010).CrossRef

20.

J. Dutta Majumdar and I. Manna, “Laser processing of materials,” Sadhana, 28(3–4), 495 – 562 (2003).CrossRef

21.

W. M. Steen, Laser Material Processing, Springer-Verlag, Berlin/Heidelberg (2003).

22.

D. Bäuerler, Laser Processing and Chemistry, Springer-Verlag, Berlin/Heidelberg (2000), 3rd ed.

23.

M. V. Allmen and A. Blatter, Laser-Beam Interactions with Materials: Physical Principles and Applications, Springer, Berlin/Heidelberg (2002).

24.

O. Guillon, “Effects of applied stress and heating rate in field assisted sintering,” in: R. Castro and K. van Benthem (eds.), Sintering. Engineering Materials, Springer, Berlin/Heidelberg (2012), Vol. 35. DOI: https://doi.org/10.1007/978-3-642-31009-69.

25.

M. S. Kovalchenko, “Rheology and kinetics of pressure sintering,” Mater. Sci. Forum, 835, 76–105 (2016). URL: https://doi.org/https://doi.org/10.4028/www.scientific.net/MSF.835.76.

26.

R. W. Rice, “Hot forming of ceramics,” in: J. J. Burke, N. L. Reed, and V. Weiss (eds.), Ultrafine-Grain Ceramics: Sagamore Army Materials Research Conference Proceedings, Springer, Boston (1970), Vol. 15.

27.

Hongjian Wang, Huatay Lin, and Chengyong Wang, “Laser drilling of structural ceramics: A review,” J. Eur. Ceram. Soc., 37, 1157 – 1173 (2017).CrossRef

28.

Shengyong Pang, Xin Chen, Jianxin Zhou, et al., “3D transient multiphase model for keyhole, vapor plume, and weld-pool dynamics in laser welding including the ambient pressure effect,” Opt. Lasers Eng., 74, 47–58 (2015). URL: https://doi.org/https://doi.org/10.1016/j.optlaseng.2015.05.003

29.

P. Bechtold, S. Eiselen, and M. Schmidt, “Influence of electrostatic fields and laser-induced discharges on ultrashort laser pulse drilling of copper,” Phys. Proc., 5, 525 – 531 (2010). URL: https://doi.org/https://doi.org/10.1016/j.phpro.2010.08.176

30.

A. Otto and M. Schmidt, “Towards a universal numerical simulation model for laser material processing,” Phys. Proc., 5, 35 – 46 (2010). URL: https://doi.org/https://doi.org/10.1016/j.phpro.2010.08.120

31.

R. Coquard, D. Rochais, and D. Baillis, “Conductive and radiative heat transfer in ceramic and metal foams at fire temperatures: Contribution to the special issue ‘Materials in Fire’,” Fire Technol., 48, 699 – 732 (2012). DOI: https://doi.org/10.1007/s10694-010-0167-8CrossRef

32.

E. Solórzano, J. A. Reglero, M. A. Rodríguez-Pérez, et al., “An experimental study on the thermal conductivity of aluminium foams by using the transient plane source method,” Int. J. Heat Mass. Transf., 51, 6259 – 6267 (2008).CrossRef

33.

R. Coquard, D. Rochais, and D. Baillis, “Experimental investigations of the coupled conductive and radiative heat transfer in metallic/ceramic foams,” Int. J. Heat Mass. Transf., 52(21–22), 4907–4918 (2009).CrossRef

34.

E. Takegoshi, Y. Hirasawa, J. Matsuo, and K. Okui, “A study on effective thermal conductivity of porous metals,” Trans. Jap. Soc. Mech. Eng., 58, 879 (1992).CrossRef

35.

M. Fetoui, F. Albouchi, F. Rigollet, and S. B. Nasrallah, “Highly porous metal foams: effective thermal conductivity measurement using a photothermal technique,” J. Porous Media, 12(10), 939 – 954 (2009).CrossRef

36.

R. Barea, M. I. Osendi, J. M. F. Ferreira, and P. Miranzo, “Thermal conductivity of highly porous mullite material,” Acta Mater., 53(11), 3313–3318 (2005).CrossRef

Title: Laser Drilling of Porous Aluminum Silicate Ceramics
Authors: Ya. S. Fironov
I. V. Mel’nikov
E. R. Nadezhdin
V. N. Tokarev
Publication date: 29-05-2021
Publisher: Springer US
Published in: Glass and Ceramics / Issue 1-2/2021
Print ISSN: 0361-7610
Electronic ISSN: 1573-8515
DOI: https://doi.org/10.1007/s10717-021-00342-8

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 1-2/2021

Gas Processing Waste: Promising Raw Material for Designing the Composition of Ceramic Grinding Bodies

Glass and Ceramics Volume 78, Number 1

Influence of Nepheline-Syenite and Mineral Wool Production Waste on Operational Properties of Ceramics

CM-Microwave Dielectric Characteristics of Low-Density Spheroplastics Based on Phenylone and Hollow Ceramic Microspheres

Yttrium-Aluminum Pomegranate Synthesis Based on Double Ammonium-Containing Carbonate Compounds of Yttrium and Aluminum

Experimental Studies on the Fabrication of Prototype Ceramic Composite Cladding Elements of the Flame Tube for a Combustion Chamber

Premium Partners