Top

The International Journal of Life Cycle Assessment

Published in:

01-03-2011 | WOOD AND OTHER RENEWABLE RESOURCES

Life cycle assessment of base–load heat sources for district heating system options

Authors: Saeed Ghafghazi, Taraneh Sowlati, Shahab Sokhansanj, Xiaotao Bi, Staffan Melin

Published in: The International Journal of Life Cycle Assessment | Issue 3/2011

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Purpose

There has been an increased interest in utilizing renewable energy sources in district heating systems. District heating systems are centralized systems that provide heat for residential and commercial buildings in a community. While various renewable and conventional energy sources can be used in such systems, many stakeholders are interested in choosing the feasible option with the least environmental impacts. This paper evaluates and compares environmental burdens of alternative energy source options for the base–load of a district heating center in Vancouver, British Columbia (BC) using the life cycle assessment method. The considered energy sources include natural gas, wood pellet, sewer heat, and ground heat.

Methods

The life cycle stages considered in the LCA model cover all stages from fuel production, fuel transmission/transportation, construction, operation, and finally demolition of the district heating system. The impact categories were analyzed based on the IMPACT 2002+ method.

Results and discussion

On a life-cycle basis, the global warming effect of renewable energy options were at least 200 kgeqCO2 less than that of the natural gas option per MWh of heat produced by the base–load system. It was concluded that less than 25% of the upstream global warming impact associated with the wood pellet energy source option was due to transportation activities and about 50% of that was resulted from wood pellet production processes. In comparison with other energy options, the wood pellets option has higher impacts on respiratory of inorganics, terrestrial ecotoxicity, acidification, and nutrification categories. Among renewable options, the global warming impact of heat pump options in the studied case in Vancouver, BC, were lower than the wood pellet option due to BC's low carbon electricity generation profile. Ozone layer depletion and mineral extraction were the highest for the heat pump options due to extensive construction required for these options.

Conclusions

Natural gas utilization as the primary heat source for district heat production implies environmental complications beyond just the global warming impacts. Diffusing renewable energy sources for generating the base–load district heat would reduce human toxicity, ecosystem quality degradation, global warming, and resource depletion compared to the case of natural gas. Reducing fossil fuel dependency in various stages of wood pellet production can remarkably reduce the upstream global warming impact of using wood pellets for district heat generation.

previous article Assessment of land use impacts on soil ecological functions: development of spatially differentiated characterization factors within a Canadian context

next article Combined application of LCA and eco-design for the sustainable production of wood boxes for wine bottles storage

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Ecoinvent v1.2 is a European database provided in the Simapro software. In this study, Ecoinvent database has been adopted by incorporating North American and case specific inputs into Ecoinvent; exception is the case of major equipment supplied from Europe where the Ecoinvent database is used unchanged.

Athena Sustainable Materials Institute (2005) Cement and structural concrete products: Life cycle inventory update #2. Ottawa, Canada

Cuddihy J, Kennedy C, Byer P (2005) Energy use in Canada: environmental impacts and opportunities in relationship to infrastructure systems. C J Civil Eng 32(1):1–15CrossRef

Doll R (1988) Effects of exposure to vinyl chloride. An assessment of the evidence. Scand J Work Enviro Health 14(2):61–78

Environmental Protection Agency (EPA) (2003) External combustion sources. In: Stationary point and area sources, AP 42. 5th ed. compilation of air pollutant emission factors No. vol. 1). Washington, DC

Eriksson O, Finnveden G, Ekvall T, Björklund A (2007) Life cycle assessment of fuels for district heating: a comparison of waste incineration, biomass and natural gas combustion. Energy Policy 35(2):1346–1362CrossRef

Frischknecht T, Jungbluth N, Althaus HJ, Doka G, Dones R, Heck T et al (2005) The ecoinvent database: overview and methodological framework. Int J Life Cycle Assess 10:3–9CrossRef

Gagnon L, Bélanger C, Uchiyama Y (2002) Life-cycle assessment of electricity generation options: the status of research in year 2001. Energ Policy 30(14):1267–1278CrossRef

Ghafghazi S, Sowlati T, Sokhansanj S, Melin S (2009) A multicriteria approach to evaluate district heating options. Appl Energ 87(4):1134–1140CrossRef

Ghafghazi S, Sowlati T, Sokhansanj S, Melin S (2010) Techno-economic analysis of renewable energy source options for a district heating project. Int J Energ Res 34:1109–1120CrossRef

Government of BC (2010) The BC bioenergy strategy: growing our natural energy advantage. Available from: http://www.energyplan.gov.bc.ca/bioenergy/PDF/BioEnergy_Plan_005_0130_web0000.pdf. Accessed on: 5 Feb 2010

Hasler P, Nussbaumer T (1999) Gas cleaning for IC engine applications from fixed bed biomass gasification. Biomass Bioenerg 16(6):385–395CrossRef

Heller MC, Keoleian GA, Mann MK, Volk TA (2004) Life cycle energy and environmental benefits of generating electricity from willow biomass. Renew Energ 29(7):1023–1042CrossRef

Hondo H (2005) Life cycle GHG emission analysis of power generation systems: Japanese case. Energy 30(11–12):2042–2056CrossRef

International Standard ISO 14042 (2000) Environmental management—life cycle assessment—life cycle impact assessment. ISO, Geneva

Johansson LS, Tullin C, Leckner B, Sjövall P (2003) Particle emissions from biomass combustion in small combustors. Biomass Bioenerg 25(4):435–446CrossRef

Johnson E (2009) Goodbye to carbon neutral: getting biomass footprints right. Environ Impact Asses Rev 29(3):165–168CrossRef

Jolliet O, Margni M, Charles RL, Humbert S, Payet J, Rebitzer G et al (2003) IMPACT 2002+: a new life cycle impact assessment methodology. Int J Life Cycle Assess 8(6):324–330CrossRef

Jungmeier G, Resch G, Spitzer J (1998) Environmental burdens over the entire life cycle of a biomass CHP plant. Biomass Bioenerg 15(4–5):311–323CrossRef

Koch FH (2000) Hydropower-internalised costs and externalised benefits. Ottawa, Canada: International Energy Agency (IEA)—Implementing Agreement for Hydropower Technologies and Programmes

Li TX, Guo KH, Wang RZ (2002) High temperature hot water heat pump with non-azeotropic refrigerant mixture HCFC-22/HCFC-141b. Energ Convers Manage 43(15):2033–2040CrossRef

Magelli F, Boucher K, Bi HT, Melin S, Bonoli A (2009) An environmental impact assessment of exported wood pellets from Canada to Europe. Biomass Bioenerg 33(3):434–441CrossRef

Mani S (2005) A systems analysis of biomass densification process. Ph.D. Dissertation, the University of British Columbia, Canada

Mann M, Spath P (2001) A life cycle assessment of biomass cofiring in a coal-fired power plant. Clean Technol Envir 3(2):81–91

Metro Vancouver, Boilers and Process Heaters Emission Regulation Bylaw No. 1087, Vancouver, Canada (2008). Available from: http://www.metrovancouver.org/boards/bylaws/Bylaws/GVRD_Bylaw_1087.pdf

Milota MR, West CD, Hartley ID (2005) Gate-to-gate life-cycle inventory of softwood lumber production. Wood Fiber Sci 37:47–57

Ministry of Energy, Mines and Petroleum Resources (2009) BC energy plan report on progress. Available from: www.energyplan.gov.bc.ca

Niemann T (2006) The state of British Columbia's forests No. SD387.S87S72 2007). British Columbia: Ministry of Forests and Range

Norris GA (2004) Simapro database manual. Franklin US LCI library. Available from: http://www.pre.nl/download/manuals/databasemanualfranklinus98.pdf. Accessed on: 2 Feb, 2010

Oliver-Solà J, Gabarrell X, Rieradevall J (2009) Environmental impacts of the infrastructure for district heating in urban neighbourhoods. Energ Policy 37:4711–4719CrossRef

Pa A (2009) Streamlined LCA of wood pellets: Export and possible utilization in UBC boiler house. Available from: http://www.sustain.ubc.ca/seedslibrary/files/SEEDS_Report_Streamlined_LCA_of_Wood_Pellets_051509.pdf. Accessed on: Feb 2010

Rafaschieri A, Rapaccini M, Manfrida G (1999) Life cycle assessment of electricity production from poplar energy crops compared with conventional fossil fuels. Energ Convers Manage 40:1477–1493CrossRef

Ressaire L (2006) Transporting more while consuming less: performance comparison of two different-size engines. Advantage, FERIC 7(20):1–5

Sambo SM (2002) Fuel consumption for ground-based harvesting systems in Western Canada. Advantage, FERIC 3(29):1–12

Shabani N (2009) Incorporating flood control rule curves of the Columbia river hydroelectric system in a multireservoir reinforcement learning optimization model, Master of Applied Science Thesis, University of British Columbia, Vancouver, Canada

St Lawrence J (2007) A demand perspective on greenhouse gas emissions. EnviroStats 1(2)

Statistics Canada (2009) Report on energy supply and demand in canada 2007 No. 57- 003- XIE). Statistics Canada

US LCI Database Project (2004a) Natural gas extraction and processing. National Renewable Energy Laboratory

US LCI Database Project (2004b) USA integrated steel production. National Renewable Energy Laboratory

Vigon BW, Tolle DA, Cornaby BW, Latham HC, Harrison L, Boguski TL et al (1994) In: Curran MA (ed) Life cycle assessment: inventory guidelines and principles. Columbus, OH: Battelle Memorial In, Battelle Institute

Zhang Y, McKechnie J, Cormier D, Lyng R, Mabee W, Ogino A et al (2010) Life cycle emissions and cost of producing electricity from coal, natural gas, and wood pellets in Ontario, Canada. Environ Sci Technol 44(1):538–544CrossRef

Title: Life cycle assessment of base–load heat sources for district heating system options
Authors: Saeed Ghafghazi
Taraneh Sowlati
Shahab Sokhansanj
Xiaotao Bi
Staffan Melin
Publication date: 01-03-2011
Publisher: Springer-Verlag
Published in: The International Journal of Life Cycle Assessment / Issue 3/2011
Print ISSN: 0948-3349
Electronic ISSN: 1614-7502
DOI: https://doi.org/10.1007/s11367-011-0259-9

Springer Professional

Abstract

Purpose

Methods

Results and discussion

Conclusions

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3/2011

Life cycle assessment of integrated circuit packaging technologies

Towards a harmonised framework methodology for the environmental assessment of food and drink products

Global life cycle impact assessments of material shifts. The example of a lead-free electronics industry

Assessment of land use impacts on soil ecological functions: development of spatially differentiated characterization factors within a Canadian context

Combined application of LCA and eco-design for the sustainable production of wood boxes for wine bottles storage

Books from an environmental perspective—Part 2: e-books as an alternative to paper books