Top

Published in:

2018 | OriginalPaper | Chapter

Mass Customization Capability Planning with Additive Manufacturing

Authors : Songi Kim, Bongju Jeong

Published in: Advances in Production Management Systems. Production Management for Data-Driven, Intelligent, Collaborative, and Sustainable Manufacturing

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Mass customization aims to manufacture large quantities of customized products at low costs comparable to that in mass production. However, the two operational objectives of mass customization, production flexibility and cost-efficiency, conflict with each other. In this circumstance, one of the famous prototyping technologies, additive manufacturing (AM), began to draw attention with its multiple function in the production system, which enables mass customizers to achieve the two contradictive objectives. This study defines mass customization capability planning (MCCP) as a production planning process which balances between production flexibility and cost-effectiveness. Also, the mathematical planning model of MCCP is developed to support it. Since the MCCP model includes stochastic parameters, a heuristic method is applied to the solution searching process. After, the MCCP model was validated by the experiment analysis.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Smart Supply Chain – Development of the Equipment Supplier in Global Value Networks

next chapter Construct a Customized Product Service System Utilizing Multi-agent System

Davis, S.: From ‘future perfect’: mass customizing. Plan. Rev. 17(2), 16–21 (1989)CrossRef

Pine, B.: Mass customizing products and services. Plan. Rev. 21(4), 6–55 (1993)CrossRef

Duray, R., Ward, P., Milligan, G., Berry, W.: Approaches to mass customization: configurations and empirical validation. J. Oper. Manag. 18(6), 605–625 (2000)CrossRef

Silveria, G., Borenstein, D., Fogliatto, F.S.: Mass customization: literature review and research directions. Int. J. Prod. Econ. 74(49), 1–13 (2001)CrossRef

Carr, S., Duenyas, I.: Optimal admission control and sequencing in a make-to-stock/make-to-order production system. Oper. Res. 48(5), 709–720 (2000)CrossRef

Rudberg, M., Wikner, J.: Mass customization in terms of the customer order decoupling point. Prod. Plan. Control 15(4), 445–458 (2004)CrossRef

Sawhney, R.: Implementing labor flexibility: a missing link between acquired labor flexibility and plant performance. J. Oper. Manag. 31(1–2), 98–108 (2013)CrossRef

Gero, J.: Recent advances in computational models of creative design. In: Pahl, P., Werner, H. (eds.) Computing in Civil and Building Engineering, vol. 21, pp. 21–30. Balkema, Rotterdam (1995)

Gibson, I., Rosen, D.W., Stucker, B.: Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing. Springer, New York (2010). https://doi.org/10.1007/978-1-4419-1120-9CrossRef

10.

Tu, Q., Vonderembse, M., Ragu-Nathan, T., Ragu-Nathan, B.: Measuring modularity-based manufacturing practices and their impact on mass customization capability: a customer-driven perspective. Decis. Sci. 35(2), 147–168 (2004)CrossRef

11.

Zhang, M., Zhao, X., Qi, Y.: The effects of organizational flatness, coordination, and product modularity on mass customization capability. Int. J. Prod. Econ. 158, 145–155 (2014)CrossRef

12.

Zhang, M., Zhao, X., Lyles, M., Guo, H.: Absorptive capacity and mass customization capability. Int. J. Oper. Prod. Manag. 35(9), 1275–1294 (2015)CrossRef

13.

Kristal, M., Huang, X., Schroeder, R.: The effect of quality management on mass customization capability. J. Oper. Prod. Manag. 30(9), 900–922 (2010)CrossRef

Title: Mass Customization Capability Planning with Additive Manufacturing
Authors: Songi Kim
Bongju Jeong
Publisher: Springer International Publishing
Book: Advances in Production Management Systems. Production Management for Data-Driven, Intelligent, Collaborative, and Sustainable Manufacturing
Print ISBN: 978-3-319-99703-2

Electronic ISBN: 978-3-319-99704-9

Copyright Year: 2018
DOI: https://doi.org/10.1007/978-3-319-99704-9_23

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partner