Top

Journal of Materials Science

Published in:

14-12-2017 | Ceramics

Mechanical behavior of porous Si₃N₄ ceramics manufactured with 3D printing technology

Authors: S. A. Lurie, Y. O. Solyaev, L. N. Rabinskiy, P. O. Polyakov, I. Sevostianov

Published in: Journal of Materials Science | Issue 7/2018

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The paper focuses on experimental measurement and analytical and numerical modeling of the elastic moduli of porous Si₃N₄ ceramics obtained by 3D printing and pressureless sintering. The pores in such a material have complex irregular shape and porosity varies over a wide range (up to 50%), depending on the technological parameters used. For analytical modeling, we use effective field methods (Mori–Tanaka–Benveniste and Maxwell homogenization schemes) recently developed for pores of superspherical shape. For FEM simulation, we used microstructures generated by overlapping solid spheres and overlapping spherical pores. It is shown that elastic properties of ceramics are largely determined by the granular structure and the concave pore shape, which have been observed in the ceramics microstructure after sintering of the 3D-printed powder green bodies.

previous article Anti-freezing asphalt concrete: ice-adhesion performance

next article Temperature-dependent space-charge-limited conduction in BaTiO3 heterojunctions

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Rabinskiy LN, Ripetsky AV, Sitnikov SA, Solyaev YO, Kahramanov RM (2016) Fabrication of porous silicon nitride ceramics using binder jetting technology. IOP Conf Ser Mater Sci Eng 140:012023. https://doi.org/10.1088/1757-899X/140/1/012023 CrossRef

Rabinsky LN, Ripetsky AV, Sitnikov SA, Solyaev Y, Kahramanov RM, Babaitsev AV (2016) In: Binder jetting of Si₃N₄-based composite ceramics with different porosity, materials science and technology conference, additive manufacturing of composites and complex materials symposium, 2016, Solt Lake City, 23–27 Oct

Rabinskiy LN, Ripetsky AV, Pogodin VA, Sitnikov SA, Solyaev YO (2017) Study of porous ceramic based on silicon nitride prepared using three-dimensional printing technology. Refract Ind Ceram 57:600–604. https://doi.org/10.1007/s11148-017-0030-2 CrossRef

Li X, Zhang L, Yin X (2012) Microstructure and mechanical properties of three porous Si₃N₄ ceramics fabricated by different techniques. Mater Sci Eng A 549:43–49. https://doi.org/10.1016/j.msea.2012.03.114 CrossRef

Li X, Zhang L, Yin X (2012) Effect of chemical vapor infiltration of Si₃N₄ on the mechanical and dielectric properties of porous Si₃N₄ ceramic fabricated by a technique combining 3-D printing and pressureless sintering. Scr Mater 67:380–383. https://doi.org/10.1016/j.scriptamat.2012.05.030 CrossRef

Duan W, Yin X, Cao F et al (2015) Absorption properties of twinned SiC nanowires reinforced Si₃N₄ composites fabricated by 3D-printing. Mater Lett 159:257–260. https://doi.org/10.1016/j.matlet.2015.06.106 CrossRef

Gibson I, Rosen DW, Stucker B (2013) Additive manufacturing technologies. 3D-printing, rapid prototyping, and direct digital manufacturing. Springer, Berlin, p 499

Barmin A, Bortnikova V, Ivanov A, Kornev V, Lurie SA, Solyaev YO (2016) Microstructure and mechanical properties of silicon carbide ceramics reinforced with multi-walled carbon nanotubes. IOP Conf Ser Mater Sci Eng 124:012142. https://doi.org/10.1088/1757-899X/124/1/012142 CrossRef

Guo N, Leu MC (2013) Additive manufacturing: technology, applications and research needs. Front Mech Eng 8:215–243. https://doi.org/10.1007/s11465-013-0248-8 CrossRef

10.

Eckel Zak C, Zhou Chaoyin, Martin JH, Jacobsen AJ, Carter WB, Schaedler TA (2016) Additive manufacturing of polymer-derived ceramics. Science 351:3–7. https://doi.org/10.1126/science.aad2688 CrossRef

11.

Bai Y, Wagner G, Williams CB (2015) Effect of bimodal powder mixture on powder packing density and sintered density in binder jetting of metals. In: Annual international solid freeform fabrication symposium, p 62

12.

Shrestha S, Manogharan G (2017) Optimization of binder jetting using Taguchi method. JOM, J Miner Met Mater Soc. https://doi.org/10.1007/s11837-016-2231-4

13.

Chen H, Zhao YF (2016) Process parameters optimization for improving surface quality and manufacturing accuracy of binder jetting additive manufacturing process. Rapid Prototyp J 22:527–538CrossRef

14.

Gonzalez JA, Mireles J, Lin Y, Wicker RB (2016) Characterization of ceramic components fabricated using binder jetting additive manufacturing technology. Ceram Int 42:10559–10564CrossRef

15.

Kachanov M, Sevostianov I (2012) Rice’ s internal variables formalism and its implications for the elastic and conductive properties of cracked materials, and for the attempts to relate strength to stiffness. J Appl Mech 79:1–10CrossRef

16.

Bruno G, Kachanov M, Green DJ (2016) Microstructure-property connections for porous ceramics: the possibilities offered by micromechanics. J Am Ceram Soc 99:3829–3852. https://doi.org/10.1111/jace.14624 CrossRef

17.

Fu Z, Schlier L, Travitzky N, Greil P (2013) Three-dimensional printing of SiSiC lattice truss structures. Mater Sci Eng A. https://doi.org/10.1016/j.msea.2012.09.107

18.

Roberts AP, Garboczi EJ (2000) Elastic properties of model porous ceramics. J Am Ceram Soc 83:3041–3048. https://doi.org/10.1111/j.1151-2916.2000.tb01680.x CrossRef

19.

Bruno G, Efremov AM, Levandovskyi AN, Clausen B (2011) Connecting the macro- and microstrain responses in technical porous ceramics: modeling and experimental validations. J Mater Sci 46:161–173. https://doi.org/10.1007/s10853-010-4899-0 CrossRef

20.

Sadowski T, Samborski S (2003) Prediction of the mechanical behaviour of porous ceramics using mesomechanical modelling. Comput Mater Sci 28:512–517. https://doi.org/10.1016/j.commatsci.2003.08.008 CrossRef

21.

Giraud A, Sevostianov I (2013) Micromechanical modeling of the effective elastic properties of oolitic limestone. Int J Rock Mech Min Sci 62:23–27. https://doi.org/10.1016/j.ijrmms.2013.04.001

22.

Chen F, Sevostianov I, Giraud A, Grgic D (2015) Evaluation of the effective elastic and conductive properties of a material containing concave pores. Int J Eng Sci 97:60–68. https://doi.org/10.1016/j.ijengsci.2015.08.012 CrossRef

23.

Sevostianov I, Giraud A (2012) On the compliance contribution tensor for a concave superspherical pore. Int J Fract 177:199–206. https://doi.org/10.1007/s10704-012-9754-7 CrossRef

24.

Chen F, Sevostianov I, Giraud A, Grgic D (2017) Accuracy of the replacement relations for materials with non-ellipsoidal inhomogeneities. Int J Solids Struct 104–105:73–80. https://doi.org/10.1016/j.ijsolstr.2016.10.023 CrossRef

25.

Mori T, Tanaka K (1973) Average stress in matrix and average elastic energy of materials with misfitting inclusions. Acta Metall 21:571–574CrossRef

26.

Benveniste Y (1987) A new approach to the application of Mori–Tanaka’s theory in composite materials. Mech Mater 6:147–157CrossRef

27.

Benveniste Y (1990) Some remarks on three micromechanical models in composite media. J Appl Mech 57:474–476CrossRef

28.

Maxwell JC (1873) A treatise on electricity and magnetism. Clarendon Press, Oxford

29.

Open source 3DP 3D printer Plan B, http://ytec3d.com/plan-b/

30.

Sevostianov I, Giraud A (2013) Generalization of Maxwell homogenization scheme for elastic material containing inhomogeneities of diverse shape. Int J Eng Sci 64:23–36CrossRef

31.

Sevostianov I (2014) On the shape of effective inclusion in the Maxwell homogenization scheme for anisotropic elastic composites. Mech Mater 75:45–59CrossRef

32.

Hashin Z (1983) Analysis of composite-materials—a survey. J Appl Mech 50:481–505CrossRef

33.

Stauffer D, Aharony A (1992) Introduction to percolation theory, 2nd edn. Taylor and Francis, London

34.

Sevostianov I, Kováčik J, Simančík F (2006) Elastic and electric properties of closed-cell aluminum foams. Cross-property connection. Mater Sci Eng A 420:87–99CrossRef

35.

McLaughlin R (1977) A study of the differential scheme for composite materials. Int J Eng Sci 15:237–244CrossRef

36.

Vavakin AS, Salganik RL (1975) Effective characteristics of nonhomogeneous media with isolated inhomogeneities. Mech Solids 10(1975):65–75

37.

Sevostianov I, Kachanov M (2007) Relations between compliances of inhomogeneities having the same shape but different elastic constants. Int J Eng Sci 45:797–806CrossRef

38.

Trofimov A, Drach B, Sevostianov I (2017) Effective elastic properties of composites with particles of polyhedral shapes. Int J Solids Struct 120:157–170CrossRef

39.

Sevostianov I, Kachanov M (2010) Local minima and gradients of stiffness and conductivity as indicators of strength reduction of brittle-elastic materials. Int J Fract 164:147–154CrossRef

Title: Mechanical behavior of porous Si3N4 ceramics manufactured with 3D printing technology
Authors: S. A. Lurie
Y. O. Solyaev
L. N. Rabinskiy
P. O. Polyakov
I. Sevostianov
Publication date: 14-12-2017
Publisher: Springer US
Published in: Journal of Materials Science / Issue 7/2018
Print ISSN: 0022-2461
Electronic ISSN: 1573-4803
DOI: https://doi.org/10.1007/s10853-017-1881-0

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 7/2018

Encapsulation of camphor in cyclodextrin inclusion complex nanofibers via polymer-free electrospinning: enhanced water solubility, high temperature stability, and slow release of camphor

Augmentation of power conversion efficiency of amorphous silicon solar cell employing poly(methyl methacrylate-co-acrylic acid) nanospheres encapsulated with gold nanoparticles

One-step hydrothermal synthesis of peony-like Ag/Bi2WO6 as efficient visible light-driven photocatalyst toward organic pollutants degradation

Effects of nano-SiO2 on the permeability-related properties of cement-based composites with different water/cement ratios

Enhancing the reactivity of aluminosilicate materials toward geopolymer synthesis

Preparation and droplet impact dynamics of superhydrophobic nano-aluminum films on metal substrates

Premium Partners