Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Metallurgical and Materials Transactions A
Published in: Metallurgical and Materials Transactions A 11/2019

23-08-2019 | Communication

Mechanical Properties of White Etching Areas in Carburized Bearing Steel Using Spherical Nanoindentation

Authors: Jonathan F. W. Leung, Vikram Bedekar, Rohit Voothaluru, Richard W. Neu

Published in: Metallurgical and Materials Transactions A | Issue 11/2019

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The indentation stress–strain curves of nanocrystalline white etching areas (WEAs) in fatigue-damaged bearing steels were measured through the Pathak–Kalidindi spherical indentation protocols. Although the hardness of WEAs has been reported as greater than the matrix, the indentation yield strength is 36 ± 6 pct smaller and the Young’s modulus is 34 ± 11 pct smaller than the matrix. Using a Voigt–Reuss–Hill approximation, the measured reduction in Young’s modulus is consistent with the effective modulus of nanocrystalline grains within the WEAs.
next article In Situ Observation of Martensite Lath Growth Behaviors in the Coarse Grained Heat-Affected Zone of 1.25Cr-0.5Mo Heat-Resistant Steel During Simulated Welding

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
S. Sheng: Report No. NREL/PR-5000-63868, National Renewable Energy Laboratory, Golden, CO, 2015.
2.
A.A. Walvekar and F. Sadeghi: Int. J. Fatigue, 2017, vol. 95, pp. 264–81.CrossRef
3.
W. Holweger, M. Wolf, D. Merk, T. Blass, M. Goss, J. Loos, S. Barteldes, and A. Jakovics: Tribol. Trans., 2015, vol. 58, pp. 59–69.CrossRef
4.
W. Solano-Alvarez and H.K.D.H. Bhadeshia: Metall. Mater. Trans. A, 2014, vol. 45, pp. 4907–15.CrossRef
5.
K. Hiraoka, M. Nagao, and T. Isomoto: J. ASTM Int., 2006, vol. 3, pp. 1–7.CrossRef
6.
A. Grabulov, R. Petrov, and H.W. Zandbergen: Int. J. Fatigue, 2010, vol. 32, pp. 576–83.CrossRef
7.
S.B. Hosseini, U. Klement, Y. Yao, and K. Ryttberg: Acta Mater., 2015, vol. 89, pp. 258–67.CrossRef
8.
9.
H. Harada, T. Mikami, M. Shibata, D. Sokai, A. Yamamoto, and H. Tsubakino: ISIJ Int., 2005, vol. 45, pp. 1897–902.CrossRef
10.
H.K. Danielsen, F.G. Guzmán, K. V. Dahl, Y.J. Li, J. Wu, G. Jacobs, G. Burghardt, S. Fæster, H. Alimadadi, S. Goto, D. Raabe, and R. Petrov: Wear, 2017, vol. 370–371, pp. 73–82.CrossRef
11.
Y.J. Li, M. Herbig, S. Goto, and D. Raabe: Mater. Sci. Technol., 2016, vol. 32, pp. 1100–5.CrossRef
12.
12 Y.J. Li, M. Herbig, S. Goto, and D. Raabe: Mater. Charact., 2017, vol. 123, pp. 349–53.CrossRef
13.
13 H.A. Al-Tameemi, H. Long, and R.S. Dwyer-Joyce: Wear, 2018, vol. 406–407, pp. 22–32.CrossRef
14.
Manieri F, Stadler K, Morales-Espejel GE, Kadiric A: Int. J. Fatigue, 2019, vol. 120, pp. 107–33.CrossRef
15.
16.
16 T. Bruce, E. Rounding, H. Long, and R.S. Dwyer-Joyce: Wear, 2015, vol. 338–339, pp. 164–77.CrossRef
17.
17 M.H. Evans, J.C. Walker, C. Ma, L. Wang, and R.J.K. Wood: J. Mater. Sci. Eng. A, 2013, vol. 570, pp. 127–34.CrossRef
18.
18 Y. Murakami and S. Matsuoka: Eng. Fract. Mech., 2010, vol. 77, pp. 1926–40.CrossRef
19.
19 Y. Murakami, N.N. Yokoyama, and J. Nagata: Fatigue Fract. Eng. Mater. Struct., 2002, vol. 25, pp. 735–46.CrossRef
20.
20 Y. Murakami, T. Nomoto, T. Ueda, and Y. Murakami: Fatigue Fract. Eng. Mater. Struct., 2000, vol. 23, pp. 903–10.CrossRef
21.
21 V. Šmeļova, A. Schwedt, L. Wang, W. Holweger, and J. Mayer: Int. J. Fatigue, 2017, vol. 100, pp. 148–58.CrossRef
22.
22 V. Šmeļova, A. Schwedt, L. Wang, W. Holweger, and J. Mayer: Int. J. Fatigue, 2017, vol. 98, pp. 142–54.CrossRef
23.
24.
25.
S.X. Li, Y.S. Su, X.D. Shu, and J.J. Chen: Wear, 2017, vol. 380–381, pp. 146–53.CrossRef
26.
S. Pathak, S.R. Kalidindi, C. Klemenz, and N. Orlovskaya: J. Eur. Ceram. Soc., 2008, vol. 28, pp. 2213–20.CrossRef
27.
27 S.R. Kalidindi and S. Pathak: Acta Mater., 2008, vol. 56, pp. 3523–32.CrossRef
28.
29.
29 E.G. Herbert, G.M. Pharr, W.C. Oliver, B.N. Lucas, and J.L. Hay: Thin Solid Films, 2001, vol. 399, pp. 331–5.CrossRef
30.
31.
32.
32 B.J. Briscoe, K.S. Sebastian, and M.J. Adams: J. Phys. D: Appl. Phys., 1994, vol. 27, pp. 1156–62.CrossRef
33.
33 S. Pathak, D. Stojakovic, R. Doherty, and S.R. Kalidindi: J. Mater. Res., 2009, vol. 24, pp. 1142–55.CrossRef
34.
34 D. Klötzer, C. Ullner, E. Tyulyukovskiy, and N. Huber: J. Mater. Res., 2006, vol. 21, pp. 677–84.CrossRef
35.
35 S.J. Vachhani, R.D. Doherty, and S.R. Kalidindi: Acta Mater., 2013, vol. 61, pp. 3744–51.CrossRef
36.
J. Thomas and T. Gemming: Analytical Transmission Electron Microscopy. Springer, Berlin, 2014.CrossRef
37.
37 A. Greco, S. Sheng, J. Keller, and A. Erdemir: Wear, 2013, vol. 302, pp. 1583–91.CrossRef
38.
39.
39 R. Errichello, R. Budny, and R. Eckert: Tribol. Trans., 2013, vol. 56, pp. 1069–76.CrossRef
40.
40 J.R. Davis: Carbon and Alloy Steels, ASM International, Materials Park, OH, 1996.
41.
41 S. Pathak, D. Stojakovic, and S.R. Kalidindi: Acta Mater., 2009, vol. 57, pp. 3020–8.CrossRef
42.
43.
43 T.R. Malow and C.C. Koch: Metall. Mater. Trans. A, 1998, vol. 29, pp. 2285–95.CrossRef
44.
44 T.R. Malow, C.C. Koch, P.Q. Miraglia, and K.L. Murty: Metall. Mater. Trans. A, 1998, vol. 252, pp. 36–43.
45.
46.
Y. Tang, E.M. Bringa, M.A. Meyers (2013) Mater. Sci. Eng. A 580, pp. 414–26.CrossRef
47.
47 J.B. Jeon, B.J. Lee, and Y.W. Chang: Scr. Mater., 2011, vol. 64, pp. 494–7.CrossRef
48.
48 H. Van Swygenhoven and P.M. Derlet: Phys. Rev. B: Condens. Matter Mater. Phys., 2001, vol. 64, pp. 1–9.
49.
49 D. Jia, K.T. Ramesh, and E. Ma: Acta Mater., 2003, vol. 51, pp. 3495–509.CrossRef
50.
51.
51 H. Van Swygenhoven and J.R. Weertman: Mater. Today, 2006, vol. 9, pp. 24–31.CrossRef
52.
52 V. Richter and M. V. Ruthendorf: Int. J. Refract. Met. Hard Mater., 1999, vol. 17, pp. 141–52.CrossRef
53.
53 X. Liu, F. Yuan, and Y. Wei: Appl. Surf. Sci., 2013, vol. 279, pp. 159–66.CrossRef
54.
55.
55 H. Li, H. Choo, Y. Ren, T.A. Saleh, U. Lienert, P.K. Liaw, and F. Ebrahimi: Phys. Rev. Lett., 2008, vol. 101, pp. 1–4.
56.
56 M.A. Meyers, A. Mishra, and D.J. Benson: Prog. Mater. Sci., 2006, vol. 51, pp. 427–556.CrossRef
57.
57 T.D. Shen, C.C. Koch, T.Y. Tsui, and G.M. Pharr: J. Mater. Res., 1995, vol. 10, pp. 2892–6.CrossRef
58.
58 G.W. Nieman, J.R.. Weertman, and R.W. Siegel: Nanostruct. Mater., 1992, vol. 1, pp. 185–90.CrossRef
59.
60.
60 E. Bonetti, G. Scipione, G. Valdre, S. Enzo, R. Frattini, and P.P. Macri: J. Mater. Sci., 1995, vol. 30, pp. 2220–6.CrossRef
61.
61 G. Palumbo, S.J. Thorpe, and K.T. Aust: Scr. Metall. Mater., 1990, vol. 24, pp. 1347–50.CrossRef
62.
62 X. Qing and G. Xingming: Int. J. Solids Struct., 2006, vol. 43, pp. 7793–9.CrossRef
63.
64.
64 S. Romankov, Y.C. Park, I. V. Shchetinin, and J.M. Yoon: Acta Mater., 2013, vol. 61, pp. 1254–65.CrossRef
Metadata
Title
Mechanical Properties of White Etching Areas in Carburized Bearing Steel Using Spherical Nanoindentation
Authors
Jonathan F. W. Leung
Vikram Bedekar
Rohit Voothaluru
Richard W. Neu
Publication date
23-08-2019
Publisher
Springer US
Published in
Metallurgical and Materials Transactions A / Issue 11/2019
Print ISSN: 1073-5623
Electronic ISSN: 1543-1940
DOI
https://doi.org/10.1007/s11661-019-05419-2

Other articles of this Issue 11/2019

Metallurgical and Materials Transactions A 11/2019 Go to the issue

OriginalPaper

Pulse Plating of Ni-W-B Coating and Study of Its Corrosion and Wear Resistance

OriginalPaper

Estimation of the Temperature in the Stirred Zone and Cooling Rate of Friction Stir Welding of EH46 Steel from TiN Precipitates

OriginalPaper

Physicomechanical, Phase Composition, and In Vitro Study of High-Temperature Sintered ZTA/HA Composites

OriginalPaper

Wire Electric Discharge Machining of P91 Steel: Microstructure and Thermal Modeling Studies

OriginalPaper

Enhancing Thermal Stability of Binary Al-Mg Alloys by Tailoring Grain Orientations Using a High Solute Mg Content

OriginalPaper

An Investigation of Tertiary γ′ Precipitation in a Powder-Metallurgy, γ-γ′ Nickel-Base Superalloy

Premium Partners

    Image Credits