Issue 12/2023
Content (35 Articles)
Tailoring Columnar Austenite Grains in the Weld Metal of EH36 Shipbuilding Steel via CaF2-TiO2 Fluxes
Yongwu Wu, Xiaobo Yuan, Ming Zhong, Junjie Ma, Cong Wang
Texture Transformation Induced Grain Fragmentation
I. P. Widiantara, W. Bahanan, K. Hamad, Y. G. Ko
Composition-Dependent Thermodynamic Factor and Tracer Diffusion of A15-V3Ga Intermetallic Compound
Nitin Srivastava, Sangeeta Santra
Dynamic Strain Aging Induced by Synergistic Effects of Deformation-Induced Martensite and Deformation Twins in Fe–Cr–Ni Metastable Austenitic Stainless Steel
Ang Xie, Shenghu Chen, Lijian Rong
Phase Equilibrium and High-Temperature Mechanical Properties of Nb–Si–X Ternary Alloys
Sae Matsunaga, Kiyoshi Komamura, Yoko Yamabe-Mitarai
Plastic Flow Instability in 304 Austenitic Stainless Steels at Room Temperature
J. Tabin, K. Nalepka, J. Kawałko, A. Brodecki, P. Bała, Z. Kowalewski
Melt Flow-Induced Mechanical Deformation and Fracture Behaviour of Dendrites in Alloy Solidification
Luwei Yang, Neng Ren, Chinnapat Panwisawas, Jun Li, Mingxu Xia, Hongbiao Dong, Jianguo Li
Enhancing the Yield Strength of Casting Eutectic High-Entropy Alloys via Coherent Precipitates
Xin Liu, Zhongsheng Yang, Dingcong Cui, Qingfeng Wu, Zhijun Wang, Junjie Li, Jincheng Wang, Feng He
Direct-Current-Assisted Healing for Functional Degradation of Nanocrystalline Superelastic NiTi Shape Memory Alloys
Shuangyan Ju, Yao Xiao, Jianping Lin, Liming Gao, Dailu Chen, Zeyang Lu, Cheng Fang, Junying Min
Sliding Wear and Friction Performance of Pack-Borided Co–28Cr–6Mo Alloy in Physiological Lubricants
Yusuf Kanca, Ozkan Gokcekaya, Ali Günen
Effect of Welding Microstructure on Stress Relaxation Cracking Studied by Controlled Residual Stress Generation in a 316L(N) Austenitic Stainless Steel
Baptiste Py-Renaudie, Diogo Goncalves, Serge Pascal, Mohamed Sennour, Vladimir A. Esin, Thilo F. Morgeneyer
Liquid Metal Corrosion of Mo and TZM in Al Melt: Mechanism and Kinetics
Lisa Ankenbrand, Andreas Lohmüller
Liquid Phase Sintering of a Metal Injection Molded Nickel-Based Superalloy With Additions of BNi-2 Alloy Powder Using Differential Scanning Calorimetry
Addison J. Rayner, Stephen F. Corbin
Three Composite Coatings Al + Al2O3, Fe–Al and Fe–Al + Al2O3 as a Barrier Against LBE Alloys on F/M Steel by Multi-arc Ion Plating
Chenhao Huang, Shunlin Zhang, Dong Pan, Xing Yin, Yong Chen, Haibo Zhao, Jun Wang
The Effects of Silicon and Niobium Concentration on the Solidification Behavior and Microstructure of Cast Monel Alloys
C. J. Farnin, E. N. Coker, P. A. Salinas, J. N. DuPont
A Crystallographic Basis for Critically Evaluating the Mechanisms for Secondary Grain Formation During Directional Solidification
N. D’Souza, I. M. Edmonds, M. Perry, D. M. Collins
Heat of Mixing of the Liquid Silver–Indium and Silver–Gallium–Indium Alloys
Dominika Jendrzejczyk-Handzlik, Piotr Handzlik
Mechanical and Tribological Behavior of Titanium and Cerium Oxide-Reinforced Plasma-Sprayed AlNiCoCrSi HEA Coatings
Atirek Gaur, Rahul Kumar, Pushpender Singh, Upender Pandel, Anup Kumar Keshri, Swati Sharma
Improving the Mechanical Properties of an Age-Hardenable Magnesium Alloy via Regulating Precipitate Scale and Building Dislocation Configuration
Tao Chen, Sijia Hu, Shiqi Li, Liuwei Zheng, Lifei Wang, Yingzhi Wang, Qinghuan Huo
Developing Ultrafine Twinned Microstructure Enabled Excellent Strength–Ductility Synergy in Mg–Al–Zn Alloy by Submerged Friction Stir Processing
Tao Sun, Fujun Cao, Jinpeng Hu, Yifu Shen, Xiaoyang Qu, Wei Xu
The Important Role Played by High-Temperature Tensile Testing in the Representation of Minimum Creep Rates Using S-Shaped Curve Models
M. Evans
Hot Compression Behavior and Microstructure Evolution of an Mg–Gd–Y–Zn–Zr Alloy Containing the 14H LPSO Phase with Different Morphologies
Yuxiang Han, Zhiyong Chen, Han Chen, Jingyi Huang, Chuming Liu
Effect of Solution Heat-Treatment on the Oxidation Resistance of Ni-Base Single-Crystal Superalloy
Chihiro Tabata, Toshio Osada, Tadaharu Yokokawa, Ayako Ikeda, Kyoko Kawagishi, Shinsuke Suzuki
Influence of Molybdenum on Rapid Solidification Microstructure and Microsegregation in Primary Ferrite Solidified Stainless Steel
Zachary Arthur Hasenbusch, Greyson Harvill, Katherine Ziska, Andrew Deal, Ben Brown, Laurentiu Nastac, Luke N. Brewer
Effect of Li Content on Hot-Tearing Susceptibility of Ternary Al-Cu-Li Alloys: Experimental Investigation, Criterion Prediction, and Simulation Assessment
Youjie Guo, Liang Zhang, Guohua Wu, Yixiao Wang, Fangzhou Qi, Xuanxi Xu, Xin Tong, Peisen Li, Guangxiao Ren, Yingjing Geng, Liangbin Li, Xunman Xiong
Microstructures and Creep Properties of Type 316LN Stainless Steel Weld Joints
A. R. Pavan, T. Sakthivel, B. Arivazhagan, M. Vasudevan, B. R. Vaishnavi Krupa
Modeling Continuous Cooling Transformations for HSLA Steels With Physical Metallurgy Guided Hereditary Machine Learning
Yang Cao, Guangming Cao, Chunyuan Cui, Xin Li, Siwei Wu, Zhenyu Liu
Graphite–WS2 Copper-Based Self-lubricating Composites Prepared by Spark Plasma Sintering
Yongdu Li, Yuan Zhang, Yang Li, Xiaohong Wang, Junjie Huang, Mei Yang
Pseudobinary Eutectic Growth and Structural Evolution Control of Quinary Ti27Ni25Co20Nb14V14 High-Entropy Alloy Through Containerless Processing
Xiannian Zhu, Jian Chang, Pengxu Yan, Maojie Lin, Bingbo Wei
Interdiffusion in Low-Al Fe–Cr–Al Alloys at 1000 °C
Suzue Yoneda, Shigenari Hayashi
Effects of TiC Powder Characteristics and Sintering Temperature on the Microstructure and Mechanical Properties of TiC–20Mo–10Ni Cermets
Xiao-Chun Deng, Jian Cui, Guo-Hua Zhang
Destabilization Treatment and Its Influence on Microstructure and Matrix Hardness of High-Cr Cast Iron
Charline Le Nué, Santiago Corujeira Gallo, Alireza Vahid, Jiangting Wang, Mehdi Taherishargh, Hooyar Attar, Daniel Fabijanic, Matthew Barnett
Quantitative Analysis of Three-Dimensional Lamellar Alignment in Pearlitic Steel With Various Pre-processing Using Semi-automatic Habit Plane Analysis
Norimitsu Koga
Suppression of Reverted Austenite in Cold-Rolled Maraging Steels and Its Impact on Mechanical Properties
Kevin Jacob, Heena Khanchandani, Saurabh Dixit, Balila Nagamani Jaya
Correction to: Austenite Grain Growth in a 2.25Cr-1Mo Vanadium-Free Steel Accounting for Zener Pinning and Solute Drag: Experimental Study and Modeling
S. Dépinoy, B. Marini, C. Toffolon-Masclet, F. Roch, A.-F. Gourgues-Lorenzon