Issue 6/2007
Content (26 Articles)
Formation of the Microstructure in a Rapidly Solidified Cu-Co Alloy
J.Z. Zhao, M. Kolbe, H.L. Li, J.R. Gao, L. Ratke
Carbon Diffusion Measurement in Austenite in the Temperature Range 500 °C to 900 °C
P. Thibaux, A. Métenier, C. Xhoffer
Hall–Petch Behavior in Ultra-Fine-Grained AISI 301LN Stainless Steel
S. Rajasekhara, P.J. Ferreira, L.P. Karjalainen, A. Kyröläinen
Influence of TiN Inclusions on the Cleavage Fracture Behavior of Low-Carbon Microalloyed Steels
W. Yan, Y.Y. Shan, K. Yang
An Experimental Study of Fracture of LIGA Ni Micro-Electro-Mechanical Systems Thin Films
Y. Yang, S. Allameh, B. Boyce, K.S. Chan, W.O. Soboyejo
Thermodynamic Database Development of the Mg-Ce-Mn-Y System for Mg Alloy Design
Youn-Bae Kang, Arthur D. Pelton, Patrice Chartrand, Philip Spencer, Carlton D. Fuerst
Selective Internal Oxidation as a Mechanism for Intergranular Stress Corrosion Cracking of Ni-Cr-Fe Alloys
Brent M. Capell, Gary S. Was
Crack Growth Behavior of Pipeline Steel in Near-Neutral pH Soil Environments
Weixing Chen, Robert L. Sutherby
Quantitative Evaluation of Aged AISI 316L Stainless Steel Sensitization to Intergranular Corrosion: Comparison Between Microstructural Electrochemical and Analytical Methods
H. Sidhom, T. Amadou, H. Sahlaoui, C. Braham
Grain Boundary Character Distribution in the Heat-Affected Zone of Friction Stir-Processed AL 7075 T7
J.A. Basinger, B.L. Adams
Strain Rates and Grain Growth in Al 5754 and Al 6061 Friction Stir Spot Welds
A. Gerlich, M. Yamamoto, T.H. North
Effect of Mold Coating Materials and Thickness on Heat Transfer in Permanent Mold Casting of Aluminum Alloys
A. Hamasaiid, M.S. Dargusch, C.J. Davidson, S. Tovar, T. Loulou, F. Rezaï-Aria, G. Dour
Solidification under Forced-Flow Conditions in a Shallow Cavity
A.N. Turchin, D.G. Eskin, L. Katgerman
Machinability of Green Powder Metallurgy Components: Part I. Characterization of the Influence of Tool Wear
Etienne Robert-Perron, Carl Blais, Sylvain Pelletier, Yannig Thomas
Machinability of Green Powder Metallurgy Components: Part II. Sintered Properties of Components Machined in Green State
Etienne Robert-Perron, Carl Blais, Sylvain Pelletier, Yannig Thomas
Grain Refinement of AZ31 Magnesium Alloy by Titanium and Low-Frequency Electromagnetic Casting
Yingxin Wang, Xiaoqin Zeng, Wenjiang Ding, Alan A. Luo, Anil K. Sachdev
Strategy to Improve the High-Temperature Mechanical Properties of Cr-Alloy Coatings
M.J.L. Gines, F.J. Williams, C.A. Schuh
Thermal and Tensile Properties of Bi-Ag Alloys
Jenn-Ming Song, Hsin-Yi Chuang, Tien-Xiang Wen
Microstructural Changes Due to Friction Stir Processing of Investment-Cast Ti-6Al-4V
A.L. Pilchak, M.C. Juhas, J.C. Williams