Issue 9/2021
Content (50 Articles)
Preface to Innovations in High-Entropy Alloys and Bulk Metallic Glasses in Honor of Peter K. Liaw
Michael C. Gao, E-Wen Huang, Yanfei Gao, Robert Maaß, Hahn Choo, Yunfeng Shi, Soo Yeol Lee, Xie Xie, Gongyao Wang, Liang Jiang
Micromechanical Behaviors of Fe20Co30Cr25Ni25 High Entropy Alloys with Partially and Completely Recrystallized Microstructures Investigated by In-Situ High-Energy X-ray Diffraction
Ning Xu, Shilei Li, Runguang Li, Shengjie Wang, Youkang Wang, Yang Ren, Yan-Dong Wang
Centrifugal Casting of Fe82Ga18 Alloy as a Tool of Mechanical Properties Improvement
V. A. Milyutin, I. V. Gervasyeva, D. I. Davidov, S. M. Nikiforova
Comparison of Corrosion Resistance Properties of Electrophoretically Deposited MoS2 and WS2 Nanosheets Coatings on Mild Steel
Antony Joseph, Merin K. Eapen, Maryann Ephraim Mampilly, V. Sajith
The Effect of Antiphase Boundary Tubes on the Hardness of FeAl
Rachel Osmundsen, Ian Baker
Extraordinary Deformation Modes in Ni-Base Superalloy CM247LC at Room Temperature
P. Zhang, Y. Yuan, X. B. Shi, J. Li, J. B. Yan, J. T. Lu, Y. F. Gu
The Application of Differential Scanning Calorimetry to Investigate Precipitation Behavior in Nickel-Base Superalloys Under Continuous Cooling and Heating Conditions
S. L. Semiatin, N. C. Levkulich, R. Larsen, J. S. Tiley, K. N. Wertz, F. Zhang, T. M. Smith, R. Y. Zhang, H. B. Dong, P. Gadaud, J. Cormier
The Mechanism for Coarse Nb-Rich Particle Formation in Steel
Sunday Abraham, Rick Bodnar, Johan Lonnqvist, Joacim Hagström, Eleonora Rydgren
On the Cooling Rate-Microstructure Relationship in Molten Metal Gas Atomization
Dario Gianoglio, Nevaf Ciftci, Sarah Armstrong, Volker Uhlenwinkel, Livio Battezzati
Tensile and Fracture Properties of Aluminium Alloy AA2219-T87 Friction Stir Weld Joints for Aerospace Applications
P. Manikandan, T. Antony Prabhu, Sushant K. Manwatkar, G. Sudarshan Rao, S. V. S. Narayana Murty, D. Sivakumar, Bhanu Pant, M. Mohan
Effects of Cr on NiAl (β′) Precipitation in Ferritic Fe-Ni-Al Alloys
C. Ferreira-Palma, M. C. Poletti, R. M. Pineda-Huitron, V. M. López-Hirata, D. I. Rivas-López, H. J. Dorantes-Rosales
A Mechanism for Carbon Depletion at Bondline of High-Frequency Electric-Resistance-Welded X70 Pipeline Steel
Nitin Kumar Sharma, Rangasayee Kannan, Leijun Li, Neil Anderson, Muhammad Rashid, Laurie Collins, Jonathan D. Poplawsky, Raymond Unocic
Distinct Recrystallization Kinetics in Ni–Co–Cr–Fe-Based Single-Phase High-Entropy Alloys
Zhongsheng Yang, Feng He, Qingfeng Wu, Kaiwei Zhang, Dingcong Cui, Bojing Guo, Bin Han, Junjie Li, Jincheng Wang, Zhijun Wang
Nitrogen Solubility in Alloy Systems Relevant to Stainless Steels
Staffan Hertzman, Reza Naraghi, Sten Wessman, Rachel Pettersson, Ulrika Borggren, Jan Y. Jonsson, Niklas Holländer Pettersson, Mina Khoda Karami, Ali Kohan-Zade
The Role of Crystallographic Texture and Basal Plane Slip on Microstructurally Short Fatigue Crack Initiation and Propagation in Forged Billet and Rolled Bar Ti-6Al-4V Alloy
Kishan Habib, Hideaki Nishikawa, Yoshiyuki Furuya, Satoshi Emura
Microstructure Evolution and Tensile Properties of Cold-Rolled and Annealed Fe-30Mn-0.14C-7Cr-0.26Ni Steel
Xiaoman Chen, Jiaxin Zhang, Jianchao Xiong, Yuhui Wang, Yubin Zhang, Tiansheng Wang, Yan Peng
Linear Relationship Between dV/dt and Grain Volume During Grain Growth
Burton R. Patterson, Robert T. DeHoff
Homogeneous Strain Introduction Using Reciprocation Technique in High-Pressure Sliding
Takahiro Masuda, Kazushige Fujimitsu, Kosei Sumikawa, Takahiro Kajita, Yongpeng Tang, Shoichi Hirosawa, Yoichi Takizawa, Manabu Yumoto, Yoshiharu Otagiri, Zenji Horita
The Effect of Homogenization Heat Treatment on the Texture Evolution in U-10Mo Alloy
Benjamin J. Schuessler, David P. Field, Nicole R. Overman, Vineet V. Joshi
Development of Microstructure and Properties of Multicomponent MoS2/HA/PEEK Coatings on a Titanium Alloy Via Electrophoretic Deposition and Heat Treatment
Filip Kuśmierczyk, Sławomir Zimowski, Alicja Łukaszczyk, Agnieszka Kopia, Łukasz Cieniek, Tomasz Moskalewicz
Effect of Silane-Functionalized RuO2 Nanoparticles on the Anticorrosive and Mechanical Properties of Poly (Methyl Methacrylate) Coatings
Joseph Raj Xavier, S. P. Vinodhini, J. Raja Beryl
Effects of Yttrium Content on the Three-Dimensional Compressive Creep Anisotropy of Mg-Y Alloys
Yuxiu Zhang, Qinghuan Huo, Zhirou Zhang, Zhenyu Xiao, Chunyu Wang, Aki Hashimoto, Xuyue Yang
Design of a Co–Al–W–Ta Alloy Series with Varying γ′ Volume Fraction and Their Thermophysical Properties
N. Volz, F. Xue, A. Bezold, C. H. Zenk, S. G. Fries, J. Schreuer, S. Neumeier, M. Göken
Effect of Sub-rapid Solidification and Secondary Cooling on Microstructure and Properties of Strip Cast Low-Carbon Bainitic–Martensitic Steel
Peisheng Lyu, Wanlin Wang, Chonghao Wang, Lejun Zhou, Yuan Fang, Jianchun Wu
Crystal Plasticity Modeling of Hydrogen and Hydrogen-Related Defects in Initial Yield and Plastic Flow of Single-Crystal Stainless Steel 316L
Theodore Zirkle, Luke Costello, David L. McDowell
Role of Cerium on Transformation Kinetics and Mechanical Properties of Low Carbon Steels
Chetan Kadgaye, Sk. Md. Hasan, Sudipta Patra, Mainak Ghosh, S. K. Nath, Anish Karmakar
Oxidation Behavior of the Skutterudite Material Yb0.2Co4Sb12
Richard Drevet, Lionel Aranda, Nicolas David, Mohamed Benyahia, Driss Kenfaui, Philippe Masschelein, Christophe Candolfi, Bertrand Lenoir, Judith Monnier, Anne Dauscher, Eric Alleno, Patrice Berthod
Plastic Deformation and Ductility of AA7075 and AA6013 at Warm Temperatures Suitable to Retrogression Forming
Katherine E. Rader, Jon T. Carter, Louis G. Hector Jr., Eric M. Taleff
The Role of Phase Hardness Differential on the Non-uniform Elongation of a Ferrite-Martensite Dual Phase Steel
Soudip Basu, Balila Nagamani Jaya, Anirban Patra, Sarbari Ganguly, Monojit Dutta, Anton Hohenwarter, Indradev Samajdar
Effect of Ausforming on the Macro- and Micro-texture of Bainitic Microstructures
Adriana Eres-Castellanos, Lucia Morales-Rivas, Jose Antonio Jimenez, Francisca G. Caballero, Carlos Garcia-Mateo
Grain Refinement Mechanisms in Gradient Nanostructured AZ31B Mg Alloy Prepared via Rotary Swaging
Xin Chen, Chuming Liu, Yingchun Wan, Shunong Jiang, Zhiyong Chen, Yonghao Zhao
Microstructure and Performance Characterization of a Novel Cobalt High-Entropy Alloy
Xueyao Wu, Rong Liu, Xiaozhou Zhang, Matthew X. Yao
The Effects of Annealing After Equal Channel Angular Extrusion (ECAE) on Mechanical and Magnetic Properties of 49Fe-49Co-2V Alloy
D. F. Susan, A. B. Kustas, R. A. Kellogg, J. D. Carroll, J. R. Michael, I. Karaman
Microstructure and Texture Evolution During Cold Rolling of 316L Stainless Steel
Chunlei Zhang, Dorte Juul Jensen, Tianbo Yu
Machine Learning Model for Thickness Evolution of Oxide Scale During Hot Strip Rolling of Steels
Chunyuan Cui, Hao Wang, Xinyu Gao, Guangming Cao, Zhenyu Liu
An Optimized Geometry of Double-Cone Compression Test Samples for a Better Control of Strain Rate
Matheus Brozovic Gariglio, Nathalie Bozzolo, Daniel Pino Muñoz
Development of Low-Yield Stress Co–Cr–W–Ni Alloy by Adding 6 Mass Pct Mn for Balloon-Expandable Stents
Soh Yanagihara, Kosuke Ueki, Kyosuke Ueda, Masaaki Nakai, Takayoshi Nakano, Takayuki Narushima
Cavitation During Creep Deformation in AA7075-T76: Cellular Automata Simulation and Experiments
Sama Safarloo, Siamak Serajzadeh
Effect of C–N Interaction on Hydrogen Embrittlement of 15Cr–15Mn–4Ni-Based Austenitic Stainless Steels
Kyung-Shik Kim, Jee-Hyun Kang, Sung-Joon Kim
Correlation of Delta-Ferrite with Tensile and Charpy Impact Properties of Austenitic Fe-23Mn-Al-C Steels
Sang-In Lee, Seung-Wan Lee, Sang-Gyu Kim, Byoungchul Hwang
Origin of Austenitization-Dependent Eutectoid Transformation in High-Speed Steel: Revisiting the Role of Primary Carbide
Xuefeng Zhou, Kaiwen Liu, Zilin Liu, Yiyou Tu, Feng Fang, Jianqing Jiang
Role of Nb Addition on Microstructural Stability and Deformation Behaviors of FeMnAlC Lightweight Steels at 400 °C
Byeong-Hun Park, Chi-Won Kim, Kyong-Woon Lee, Ji-Un Park, Seong-Jun Park, Hyun-Uk Hong
The Columnar-to-Equiaxed Transition in Melt Pools During Laser Powder Bed Fusion of M2 Steel
Yining He, Ming Zhong, Nick Jones, Jack Beuth, Bryan Webler
Investigation into Atomic Diffusion at the Interface During Extrusion Welding of Magnesium and Magnesium Alloys
Shengwen Bai, Gang Fang, Bin Jiang, Jie Zhou
Revisiting the Role of Solutes in Grain Refinement of Hypoeutectic Alloys
Q. Han
Three-Phase Eutectic Microstructures: Influence of Interfacial Energy Anisotropy and Solute Diffusivities
Sumeet Khanna, Abhik Choudhury
Temperature-Dependent Irradiation-Induced Clustering in a Fe–Mn–Ni Alloy
Jing Xue, Rong Hu, Guanghai Bai, Jinna Mei, Fei Xue, Gang Sha
Separation of Time Scales of Plastic Instabilities During Microscale Deformation of bcc Fe
Marta Pozuelo, Katherine Jiang, Jaime Marian
Model Description of Phonon Spectrum of Solids: A Machine Learning Approach
A. N. Filanovich, A. A. Povzner
Surface Analysis and In Vitro Corrosion Properties in Artificial Saliva of Surface-Treated Ti6Al4V Alloy for Dental Applications
M. A. Hussein, A. Madhan Kumar, Ahmed F. Abdelaal, M. Abdul Azeem