Metallurgical and Materials Transactions B 6/1998

Beneficiation of west sibaiya phosphate ores by flotation in alkaline media

R. M. Awadallah, A. E. Mohamed, N. T. El Hazek, M. Y. Hassan

The acid-base behavior of zinc sulfate electrolytes: The temperature effect

Weidong Wang, David B. Breisinger

Titanium powder production by TiCl4 gas injection into magnesium through molten salts

Tetsushi N. Deura, Tomoya Matsunaga, Ryosuke O. Suzuki, Katsutoshi Ono, Masahiro Wakino

A study on carbothermic reduction of ilmenite ore in a plasma reactor

R. K. Galgali, H. S. Ray, A. K. Chakrabarti

Thermodynamic model for MnO-containing slags and gas-slag-metal equilibrium in ferromanganese smelting

Hongjie Li, Arthur E. Morris, David G. C. Robertson

Measurement of pH in the vicinity of a cathode during the chloride electrowinning of nickel

Kuniaki Murase, Takeshi Honda, Tetsuji Hirato, Yasuhiro Awakura

Gas flow analysis in melting furnaces

L. I. Kiss, R. T. Bui, A. Charette, T. Bourgeois

Effects of pore diameter, bath surface pressure, and nozzle diameter on the bubble formation from a porous nozzle

Manabu Iguchi, Masuo Kaji, Zen-Ichiro Morita

Effect of cross-flow on the frequency of bubble formation from a single-hole nozzle

Manabu Iguchi, Yukio Terauchi, Shin-Ichiro Yokoya

Evaluation of velocity-dependent in situ leaching processes: Single-porosity model

J. Liu, B. H. Brady

Kinetics studies on the dissolution of nitrogen in the CaO-Al2O3-SiO2 and CaO-Al2O3-TiO x melts

Koichi Iuchi, Kazuki Morita, Nobuo Sano

Activities in the spinel solid solution Fe X Mg1−X Al2O4

K. T. Jacob, Rashmi Patil

Simulation of microporosity formation in modified and unmodified A356 alloy castings

Julie Huang, James G. Conley, T. Mori

Fractal analysis of the surface cracks on continuously cast steel slabs

Hiroshi Kametani

Solidification behavior and microstructural evolution during laser beam—material interaction

P. S. Mohanty, J. Mazumder

The use of particle image velocimetry in the physical modeling of flow in electromagnetic or direct-chill casting of aluminum: Part I. Development of the physical model

Dong Xu, W. Kinzy Jones Jr., J. W. Evans

The use of particle image velocimetry in the physical modeling of flow in electromagnetic or direct-chill casting of aluminum part II. Results of the physical model, including bag geometry, blockage, and nozzle placement

Dong Xu, W. Kinzy Jones Jr., J. W. Evans

Carbochlorination kinetics of titanium dioxide with carbon and carbon monoxide as reductant

Fenglin Yang, Vladimir Hlavacek

Desorption kinetics of carbon and oxygen in liquid niobium

Hyun Gyoon Park, Reza Abbaschian

Effect of oxidation treatment and surface filming on hydrogen degassing from TiH2

Fusheng Han, Zhengang Zhu, Junchang Gao, Wenhai Song

Numerical investigation of the interface in a continuous steel casting mold water model

A. Theodorakakos, G. Bergeles

Evaluation of nickel flash smelting through piloting and simulation

S. R. Varnas, P. T. L. Koh, N. Kemori

Mathematical simulation on coupled flow, heat, and solute transport in slab continuous casting process

Hongliang Yang, Xingzhong Zhang, Kaiwen Deng, Wencai Li, Yong Gan, Liangang Zhao

Liquid flow on a rotating disk prior to centrifugal atomization and spray deposition

Y. Y. Zhao, M. H. Jacobs, A. L. Dowson

Communications

Solubility of bismuth in γ-iron

Lewen Chang, Mark E. Schlesinger

Communications

On the calculation of ionic equilibria using the gibbs energy minimization method

Petr Voňka, Jindřich Leitner

Springer Professional

Metallurgical and Materials Transactions B

Content (26 Articles)

Current Publications

Premium Partners