Top

Strength of Materials

Published in:

01-03-2013

Methods and Findings of Stress–strain State and Strength Analyses of Multilayer Thick-Walled Anisotropic Cylinders under Dynamic Loading (Review). Part 2. Theoretical Methods

Authors: P. P. Lepikhin, V. A. Romashchenko

Published in: Strength of Materials | Issue 2/2013

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The authors review the known (from available publications) methods and results of theoretical (analytical and numerical) investigations of stress–strain state and strength of multilayer thickwalled anisotropic cylinders under dynamic loading.

previous article A Physical-Mechanical Model of Ductile Fracture in Irradiated Austenitic Steels

next article Effect of Pulsed Magnetic Field Treatment on the Fracture Resistance of a Cracked Specimen

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

P. P. Lepikhin, V. A. Romashchenko, and E. V. Bakhtina, “Methods and findings of stress–strain and strength analyses of multilayer thick-walled anisotropic cylinders under dynamic loading (Review). Part 1. Experimental studies,” Strength Mater., 45, No. 1, 10–19 (2013).CrossRef

Ya. M. Grigorenko, A. T. Vasilenko, and N. D. Pankratova, “On the stress–strain calculation for thick-walled heterogeneous anisotropic shells,” Prikl. Mekh., 10, No. 5, 86–93 (1974).

G. G. Vlaikov, “On solving an axisymmetric strain problem for thick-walled orthotropic shells of revolution,” Prikl. Mekh., 11, No. 3, 20–24 (1975).

S. G. Lekhnitskii, Theory of Elasticity of Anisotropic Body [in Russian], Nauka, Moscow (1977).

Ya. M. Grigorenko, A. T. Vasilenko, and N. D. Pankratova, “On determination of temperature fields and stresses in orthotropic laminated cylinders,” Matemat. Met. Fiz.-Mekh. Polya, Issue 18, 67–72 (1983).

Ya. M. Grigorenko, A. T. Vasilenko, and N. D. Pankratova, “A study of stress level and stress–strain behavior of composite shells in a 3D problem statement,” Mekh. Kompoz. Mater., No. 3, 667–674 (1984).

A. T. Vasilenko and N. D. Pankratova, “Equilibrium of anisotropic heterogeneous hollow cylinders,” Prikl. Mekh., 20, No. 8, 11–18 (1984).

Ya. M. Grigorenko, A. T. Vasilenko, and N. D. Pankratova, Statics of Anisotropic Thick-Walled Shells [in Russian], Vyshcha Shkola, Kiev (1985).

A. T. Vasilenko and N. D. Pankratova, “Spatial effects in deformation problems for cylindrical shells of anisotropic composites,” Mekh. Kompoz. Mater., No. 5, 965–969 (1986).

10.

A. T. Vasilenko and N. D. Pankratova, “Investigation of spatial effects in thermal-stress problems of anisotropic shells,” Mekh. Kompoz. Mater., No. 3, 487–493 (1989).

11.

V. G. Karnaukhov (Ed.), Ya. M. Grigorenko, A. T. Vasilenko, and N. D. Pankratova, Elastic Problems for Heterogeneous Bodies [in Russian], Naukova Dumka, Kiev (1991).

12.

A. K. Noor, W. S. Burton, and J. M. Peter, “Assessment of computational models for multilayered composite cylinders,” Int. J. Solids Struct., 27, No. 10, 1269–1286 (1991).CrossRef

13.

Ya. M. Grigorenko and A. T. Vasilenko, Static Problems of Anisotropic Heterogeneous Shells [in Russian], Nauka, Moscow (1992).

14.

Ya. M. Grigorenko and A. T. Vasilenko, “Solution of problems and stress–strain analysis of anisotropic heterogeneous shells. Review,” Prikl. Mekh., 33, No. 11, 3–38 (1997).

15.

B. Yu. Nemish, “On stress–strain state in orthotropic thick-walled cylinders under nonuniform pressure,” Prikl. Mekh., 34, No. 4, 61–68 (1998).

16.

Ya. M. Grigorenko and N. N. Kryukov, “A study of nonsymmetric stress–strain state in transversely isotropic cylinders under various boundary conditions at ends,” Prikl. Mekh., 34, No. 7, 3–10 (1998).

17.

Ya. M. Grigorenko and A. T. Vasilenko, “Determination of stress–strain state in anisotropic heat-sensitive cylinders,” Matemat. Met. Fiz.-Mekh. Polya, 41, No. 1, 73–77 (1998).

18.

G. G. Vlaikov and A. Ya. Grigorenko, Some Axisymmetric Static and Dynamic Problems of Anisotropic Cylindrical Bodies [in Russian], Technical Center of NAS of Ukraine, Kiev (1998).

19.

Ya. M. Grigorenko and M. M. Kryukov, “On the influence of boundary conditions on stress–strain state in transversely isotropic finite-length cylinders,” Dop. NAN Ukrainy, No. 4, 60–63 (1999).

20.

Mechanics of Composites [in Russian], in 12 volumes, Vol. 8: Ya. M. Grigorenko, A. T. Vasilenko, I. G. Emel’yanov, et al., Statics of Structural Members, A.C.K., Kiev (1999).

21.

L. Librescu and T. Hause, “Recent development in the modeling and behavior of advanced sandwich constructions (survey),” Compos. Struct., 48, 1–17 (2000).CrossRef

22.

M. Xia, K. Kemmochi, and H. Takayanagi, “Analysis of filament-wound fiber-reinforced sandwich pipe under combined internal pressure and thermomechanical loading,” Compos. Struct., 51, 273–283 (2001).CrossRef

23.

M. Xia, H. Takayanagi, and K. Kemmochi, “Analysis of multi-layered filament-wound composite pipes under internal pressure,” Compos. Struct., 53, 483–491 (2001).CrossRef

24.

Ya. M. Grigorenko, N. N. Kryukov, and T. V. Kryzhanovskaya, “Investigation of stress–strain state in orthotropic hollow cylinders under nonsymmetric loading,” Teoret. Prikl. Mekh., Issue 33, 3–6 (2001).

25.

G. G. Vlaikov, A. Ya. Grigorenko, and S. N. Shevchenko, Some Static and Dynamic Problems for Anisotropic Hollow Cylinders of Noncircular Cross-Section [in Russian], Timoshenko Institute of Mechanics of NAS of Ukraine, Technical Center of NAS of Ukraine, Kiev (2001).

26.

L. Parnas and N. Katirci, “Design of fiber-reinforced composite pressure vessels under various loading conditions,” Compos. Struct., 58, 83–95 (2002).CrossRef

27.

A. Ya. Grigorenko and G. G. Vlaikov, Some Problems of Elasticity Theory for Anisotropic Bodies of Cylindrical Form, Timoshenko Institute of Mechanics of the NAS of Ukraine; Technical Center of the NAS of Ukraine, Kiev (2002).

28.

Ya. M. Grigorenko and L. S. Rozhok, “A study of stress state in elliptic cylinders for various eccentricity and wall thickness values,” Prikl. Mekh., 38, No. 8, 69–82 (2002).

29.

Ya. M. Grigorenko and L. S. Rozhok, “On one approach to the solution of stress problems for noncircular hollow cylinders,” Prikl. Mekh., 38, No. 5, 61–71 (2002).

30.

A. L. Shuvalov and K. P. Soldatos, “On the successive approximation method for three-dimensional analysis of radially ingomogeneous tubes with an arbitrary cylindrical anisotropy,” J. Sound Vibr., 259, No. 1, 233–239 (2003).CrossRef

31.

H. Y. Sheng and J. Q. Ye, “A three-dimensional state space finite element solution for laminated composite cylindrical shells,” Comp. Methods Appl. Mech. Eng., 192, 2441–2459 (2003).CrossRef

32.

Ya. M. Grigorenko and A. T. Vasilenko, “Determination of temperature fields and stresses in heterogeneous anisotropic shells in various problem statements,” Matemat. Met. Fiz.-Mekh. Polya, 46, No. 1, 21–31 (2003).

33.

Ya. M. Grigorenko and L. S. Rozhok, “On solving a stress–strain problem for hollow cylinders of corrugated elliptic cross-section,” Prikl. Mekh., 40, No. 2, 67–73 (2004).

34.

Ya. M. Grigorenko and L. S. Rozhok, “Determination of stress state in orthotropic hollow cylinders of noncircular cross-section,” Prikl. Mekh., 40, No. 6, 99–106 (2004).

35.

Ya. M. Grigorenko and L. S. Rozhok, “On the influence of corrugation frequency and amplitude,” Prikl. Mekh., 40, No. 9, 87–93 (2004).

36.

A. Ya. Grigorenko and G. G. Vlaikov, “Investigation of the static and dynamic behaviour of anisotropic cylindrical bodies with noncircular cross-section,” Int. J. Solids Struct., 41, 2781–2798 (2004).

37.

Ya. M. Grigorenko and L. S. Rozhok, “Solution of a stress problem for transversely isotropic hollow cylinders with corrugation in cross-section,” Prikl. Mekh., 41, No. 3, 62–69 (2005).

38.

P. Y. Tabakov and E. B. Summers, “Lay-up optimization of multilayered anisotropic cylinders based on a 3-D elasticity solution,” Comp. Struct., 84, 374–384 (2006).CrossRef

39.

Ya. M. Grigorenko, G. P. Urusova, and L. S. Rozhok, “A study of stress state in non-thin cylindrical shells of elliptic cross-section in the refined and spatial problem statements,” Prikl. Mekh., 42, No. 8, 44–57 (2006).

40.

Ya. M. Grigorenko and L. S. Rozhok, “Stress analysis of orthotropic hollow cylinders of corrugated cross-section,” Prikl. Mekh., 42, No. 12, 87–96 (2006).

41.

Ya. M. Grigorenko, G. G. Vlaikov, and A. Ya. Grigorenko, Numerical-Analytical Solution of Problems of Shell Mechanics Using Various Models [in Russian], Akademperiodika, Kiev (2006).

42.

Ya. M. Grigorenko and L. S. Rozhok, “On the influence of orthotropy parameters on stress state in hollow cylinders of elliptic cross-section,” Prikl. Mekh., 43, No. 12, 82–90 (2007).

43.

H. Bakaiyan, H. Hosseini, and E. Ameri, “Analysis of multi-layered filament- wound composite pipes under combined internal pressure and thermomechanical loading with thermal variations,” Compos. Struct., 88, 532–541 (2009).CrossRef

44.

A. Onder, O. Sayman, and N. Tarakcioglu, “Burst failure load of composite pressure vessels,” Compos. Struct., 89, 159–166 (2009).CrossRef

45.

A. Hosine, D. Chapelle, M. L. Boubakar, et al., “Experimental and analytical investigation of the cylindrical part of a metallic vessel reinforced by filament winding while submitted to internal pressure,” Int. J. Press. Vess. Piping, 86, 649–655 (2009).CrossRef

46.

Ya. M. Grigorenko, A. Ya. Grigorenko, and G. G. Vlaikov, Problems of Mechanics for Anisotropic Ingomogeneous Shells on the Basis of Different Models, Timoshenko Institute of Mechanics of the NAS of Ukraine; Technical Center of the NAS of Ukraine, Kiev (2009).

47.

Ya. M. Grigorenko and L. S. Rozhok, “Equilibrium of eliptic hollow three-layer cylinders with transversely isotropic middle layer,” Dop. NAN Ukrainy, No. 3, 57–62 (2011).

48.

M. S. Qatu, R. W. Sullivan, and W. Wang, “Recent research advances on the dynamic analysis of composite shells: 2000–2009,” Compos. Struct., 93, 14–31 (2010).CrossRef

49.

M. S. Qatu, Vibration of Laminated Shells and Plates, Elsevier, San Diego, CA (2004).

50.

M. S. Qatu, “Recent research advances in the dynamic behavior of shells: 1989–2000. Pt. I: Laminated composite shells,” Appl. Mech. Rev., 55, 325–350 (2002).CrossRef

51.

M. S. Qatu, Free Vibration and Static Analysis of Laminated Composite Shallow Shells, Ph.D. Dissertation, Ohio State University (1989).

52.

M. S. Qatu, “Review of shallow shell vibration research,” Shock Vibr. Dig., 24, 3–15 (1992).CrossRef

53.

M. S. Qatu, “Accurate theory for laminated composite deep thick shells,” Int. J. Solids Struct., 36, 2917–2941 (1999).CrossRef

54.

N. A. Abrosimov, “Numerical investigation of axisymmetric deformation of composite shells of revolution under pulse actions,” Mekh. Kompoz. Mater., No. 4, 647–653 (1987).

55.

A. E. Bogdanovich and É. G. Feldmane, “Load-bearing capacity calculation for composite cylindrical shells under dynamic loading,” Mekh. Kompoz. Mater., No. 3, 476–484 (1980).

56.

P. Z. Lugovoi and V. F. Meish, “Numerical simulation of the dynamic behavior and strength analysis of multilayer shells under impulsive loading,” Strength Mater., 32, No. 4, 368–375 (2000).CrossRef

57.

I. K. Naval and P. F. Sabodash, “Axisymmetric waves in orthotropic cylindrical shell,” Mekh. Kompoz. Mater., No. 5, 924–928 (1981).

58.

V. V. Vasil’ev and V. I. Sisauri, “Investigation of dynamic behavior of composite shells of revolution under internal pressure loading,” Mekh. Kompoz. Mater., No. 1, 73–78 (1985).

59.

A. I. Abakumov, P. N. Nizovtsev, V. P. Solov’ev, et al., “Computational-experimental study of stress–strain of composite shells of revolution under dynamic loading, allowing for large strains,” Mekh. Kompoz. Mater., No. 1, 28–37 (1998).

60.

A. I. Abakumov, V. V. Egunov, A. G. Ivanov, et al., “Computational-experimental study of deformation of explosion chamber shells,” Zhurn. Prikl. Mekh. Tekhn. Fiz., No. 3, 127–130 (1984).

61.

A. I. Abakumov, A. V. Pevnitskii, and V. P. Solov’ev, “A study of deformation dynamics for spherical vessels under internal explosion loading,” in: Applied Problems of Strength and Plasticity. Algorithmization and Automation of Research [in Russian], Gorky University, Gorky (1988), pp. 53–57.

62.

N. A. Abrosimov and N. A. Kulikova, “Identification of parameters for viscoelastic deformation models of composite materials on the basis of impulse loading analysis of shells of revolution,” Mekh. Tverd. Tela, No. 3, 42–57 (2011).

63.

N. A. Abrosimov and V. G. Bazhenov, Nonlinear Dynamic Problems of Composite Structures [in Russian], Izd. NNGU, Nizhny Novgorod (2002).

64.

Mechanics of Composites, in 12 volumes, Vol. 9: Dynamics of Structural Members [in Russian], Naukova Dumka, Kiev (1999).

65.

Yu. É. Senitskii, “On the solution of an axisymmetric dynamic problem for anisotropic thick-walled short cylinder,” Prikl. Mekh., 17, No. 8, 95–100 (1981).

66.

A. S. Kosmodamianskii and V. I. Storozhev, Elastodynamic Problems for Anisotropic Media [in Russian], Naukova Dumka, Kiev (1985).

67.

Yu. N. Babich, “Stress waves in an orthotropic cylinder under local shock loading,” Strength Mater., 20, No. 7, 918–923 (1988).CrossRef

68.

Sh. U. Galiev, Yu. N. Babich, S. V. Zhurakhovskii, et al., Numerical Modeling of Wave Processes in Finite Media [in Russian], Naukova Dumka, Kiev (1989).

69.

Sh. U. Galiev and V. A. Romashchenko, “Numerical investigation of three-dimensional nonlinear waves in combined bodies of revolution,” Mekh. Kompoz. Mater., No. 1, 136–141 (1989).

70.

Sh. U. Galiev, Z. G. Alpaidze, V. A. Romashchenko, et al., Numerical Impulse-Loading Calculation Procedures for Anisotropic Hollow Bodies of Revolution [in Russian], Preprint, Institute of Problems of Strength, Academy of Sciences of Ukr.SSR, Kiev (1984).

71.

Sh. U. Ga1iev, V. A. Romashchenko, and Z. G. Alpaidze, “Effect of anisotropy and viscosity on the propagation of waves in multilayer cylinders,” Strength Mater., 15, No. 9, 1236–1241 (1983).CrossRef

72.

V. A. Romashchenko, “Viscoelastoplastic waves in the vicinity of nodal points of anisotropic shells,” Strength Mater., 16, No. 10, 1456–1459 (1984).CrossRef

73.

P. P. Lepikhin, V. A. Romashchenko, S. A. Tarasovskaya, and V. G. Korbach, “Range of the applicability of the Wilkins method to the investigation of the dynamic stress–strain state of anisotropic elastic axisymmetric shells,” Strength Mater., 35, No. 1, 52–59 (2003).CrossRef

74.

R. Ansari, F. Alisafaei, and P. Ghaedi, “Dynamic analysis of multi-layered filament-wound composite pipes subjected to cyclic internal pressure and cyclic temperature,” Compos. Struct., 92, 1100–1109 (2010).CrossRef

75.

P. P. Lepikhin, V. A. Romashchenko, S. A. Tarasovskaya, and V. F. Demenko, “Numerical study of dynamics of cylindrical spirally reinforced thick-walled shells,” Aviats.-Kosm. Tekhn. Tekhnol., Issue 5 (40), 56–60 (2003).

76.

P. P. Lepikhin, V. A. Romashchenko, and S. A. Tarasovskaya, “Modification of the Wilkins method to study the dynamics of axisymmetric thick-wall shells with a spiral orthotropy,” Strength Mater., 36, No. 2, 119–124 (2004).CrossRef

77.

V. A. Romashchenko and S. A. Tarasovskaya, “Numerical study of dynamics of thick-walled cylindrical spirally reinforced shells,” Mekh. Kompoz. Mater., No. 2, 225–236 (2005).

78.

V. A. Romashchenko, S. A. Tarasovskaya, and V. F. Demenko, “Numerical modeling of dynamics of thick-walled multilayer spirally reinforced cylindrical shells,” Otkr. Inform. Komp. Tekhnol., Issue 23, 170–182 (2004).

79.

V. A. Romashchenko and S. A. Tarasovskaya, “Numerical studies on the dynamic behavior of multilayer thick-walled cylinders with helical orthotropy,” Strength Mater., 36, No. 6, 621–629 (2004).CrossRef

80.

M. N. Krivosheina, A. V. Radchenko, and S. V. Kobenko, “Failure of orthotropic and isotropic spherical bodies under the uniform compression pulse,” Mekh. Kompoz. Mater. Konstr., 7, No. 1, 95–102 (2001).

81.

V. A. Romashchenko, “A numerical study of the nonlinear dynamics of multilayer spirally orthotropic cylinders,” Strength Mater., 40, No. 6, 678–687 (2008).CrossRef

82.

V. T. Troshchenko (Ed.), Strength of Materials and Structures [in Russian], Akademperiodika, Kiev (2005).

83.

V. T. Troshchenko (Ed.), Strength of Materials and Structures [in Russian], Vol. 3: P. P. Lepikhin and V. A. Romashchenko, Strength of Thick-Walled Shells of Revolution under Impulse Loading, Pisarenko Institute of Problems of Strength of NAS of Ukraine, Kiev (2010).

84.

V. N. Kukudzhanov, “Numerical modeling of dynamic processes of deformation and fracture in elasticplastic media,” Uspekhi Mekh., 8, No. 4, 21–65 (1985).

85.

M. L. Wilkins, “Calculation of elastic–plastic flow,” in: Computational Methods in Hydrodynamics [Russian translation], Mir, Moscow (1967), pp. 212–263.

86.

D. P. Flanagan and T. Belytschko, “A uniform strain hexahedron and quadrilateral with orthogonal hourglass control,” Int. J. Numer. Meth. Eng., 17, 679–706 (1981).CrossRef

87.

S. M. Yunus, T. P. Pawlak, and R. D. Cook, “Solid elements with rotational degrees of freedom. Pt. 1. Hexahedron elements,” Int. J. Numer. Meth. Eng., 31, 573–592 (1991).CrossRef

88.

T. P. Pawlak, S. M. Yunus, and R. D. Cook, “Solid elements with rotational degrees of freedom. Pt. 2. Tetrahedron elements,” Int. J. Numer. Meth. Eng., 31, 593–610 (1991).CrossRef

89.

M. L. Wilkins, R. E. Blum, E. Cronshagen, and P. Grantham, A Method for Computer Simulation of Problems in Solid Mechanics and Gas Dynamics in Three Dimensions and Time, Report UCRK-51574, University of California, Lawrence Livermore National Laboratory (1974).

90.

Y. Pan, M. Perton, C. Rossignol, and B. Audoin, “The transient response of transversely isotropic cylinder under a laser point source impact,” Ultrasonics, 44, 823–827 (2006).CrossRef

91.

V. A. Romashchenko, “Method of solving three-dimensional nonlinear dynamic problems for compound bodies of rotation,” Strength Mater., 25, No. 6, 422–450 (1993).CrossRef

92.

V. A. Romashchenko, O. S. Beiner, and Yu. N. Babich, “Numerical-analytical method for 3D dynamics study of spirally orthotropic multilayer cylinders,” Strength Mater., 43, No. 4, 438–446

93.

V. A. Romashchenko and O. S. Beiner, “Numeric simulation of three-dimensional dynamics and strength of multilayered spirally orthotropic cylinders,” Strength Mater., 44, No. 2, 187–195 (2012).CrossRef

94.

V. A. Romashchenko, Yu. N. Babich, and E. V. Bakhtina, “Strength assessment for composite and metal-composite cylinders under pulse loading. Part 2. Numerical evaluation of strength for multilayer cylinders of finite length under internal explosion,” Strength Mater., 44, No. 5, 502–511 (2012).CrossRef

Title: Methods and Findings of Stress–strain State and Strength Analyses of Multilayer Thick-Walled Anisotropic Cylinders under Dynamic Loading (Review). Part 2. Theoretical Methods
Authors: P. P. Lepikhin
V. A. Romashchenko
Publication date: 01-03-2013
Publisher: Springer US
Published in: Strength of Materials / Issue 2/2013
Print ISSN: 0039-2316
Electronic ISSN: 1573-9325
DOI: https://doi.org/10.1007/s11223-013-9441-6

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 2/2013

On the Assessment of Stress–strain State of the Load-Bearing Structural Elements in the Tubular Explosion Chamber

Effect of Pulsed Magnetic Field Treatment on the Fracture Resistance of a Cracked Specimen

State of Volumetric Damage of Tribo-Fatigue System

Evolutionary Algorithms in the Problems of Structure Optimization for Composite Shells from Viscoelastic Materials

Study on Non-Linear Flexural Behavior of Reinforced Concrete Beams Using ANSYS by Discrete Reinforcement Modeling

Strengthening of Pump Rods with Regard for the Stochastic Distribution of Plastic Properties of the Material

Premium Partners