Top

Metal Science and Heat Treatment

Published in:

18-04-2019

Microstructure and Mechanical Properties of Dissimilar Al – Cu Joints Formed by Friction Stir Welding

Authors: E. N. Ryl’kov, F. Yu. Isupov, A. A. Naumov, O. V. Panchenko, A. I. Shamshurin

Published in: Metal Science and Heat Treatment | Issue 11-12/2019

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Friction-stir-welded joints of commercial-purity copper and aluminum alloy AMg5 are studied. The effect of the process parameters on the microstructure and mechanical properties of the joints is analyzed. The results of temperature measurements during the welding made with the help of thermocouples are presented. A mathematical model is suggested for computing the temperature field of a weld. The computed and experimental data are compared.

previous article Effect of Heat Treatment on the Structure and Phase Composition of a High-Temperature Nickel Alloy Obtained by Laser Cladding

next article A Study of Structural Features of a Gradient Material from a Heat-Resistant Nickel Alloy Produced by Laser Cladding

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

C. Dawes and W. Thomas, TWI Bull. (1995), 124 p.

T. Debroy and H. K. D. H. Bhadeshia, “Friction stir welding of dissimilar alloys — a perspective,” Sci. Technol. Weld. Join., 15(4), 266 – 270 (2010).CrossRef

A. I. Rudskoy, A. A. Naumov, and E. V. Chernikov, “Friction stir processing of metals is a new method of intensive plastic deformation,” Tsvetn. Met., No. 4, 36 – 40 (2014).

I. I. Musabirov, I. M. Safarov, R. M. Galeyev, et al., “Plastic deformation of the Ni – Mn – Ga alloy by multiple isothermal forging,” Mater. Phys. Mech., 33(1), 124 – 136.

A. I. Rudskoy, G. E. Kodzhaspirov, J. Kliber, and C. Apostolopoulos, “Advanced metallic materials and processes,” Mater. Phys. Mech., 25(1), 1 – 8 (2016).

R. A. Parshikov, A. I. Rudskoy, A. M. Zolotov, and O. V. Tolochko, “Analysis of specimen plastic flow features during severe plastic deformation,” Rev. Adv. Mater. Sci., 45(1 – 2), 67 – 75 (2016).

F. Grechnikov and A. Khaimovich, “The study of plastic deformation at high stain rates in upset forging of cylinders,” Key Eng. Mater., 684, 74 – 79 (2016).CrossRef

K. P. Mehta and V. J. Badheka, “Review on dissimilar friction stir welding of copper to aluminum: process, properties, and variants,” Mater. Manuf. Proc., 31, 233 – 254 (2016).CrossRef

S. Yu. Kondrat’ev, Yu. N. Morozova, Yu. A. Golubev, et al., “Microstructure and mechanical properties of welds of Al –Mg – Si alloys after different modes of impulse friction stir welding,” Metal Sci. Heat Treat., 59(11 – 12), 679 – 702 (2018).

10.

A. A. Naumov, F. Yu. Isupov, O. V. Panchenko, and E. N. Rylkov, “Dissimilar welding of Cu and Al alloys by friction stir welding and impulse friction stir welding,” Proc. 28th Int. Ocean and Polar Eng. Conf., pp. 166 – 171 (2018).

11.

A. Loureiro, D. Verdera, D. Gesto, and D. M. Rodriguez, “Influence of tool offsetting on the structure and morphology of dissimilar aluminum to copper friction-stir welds,” Metal. Mater. Trans. A, 43A, 5096 – 5105 (2012).

12.

A. Regensburg, R. Schurer, M. Weigl, and J. P. Bergmann, “Influence of pin length and electrochemical platings on the mechanical strength and macroscopic defect formation in stationary shoulder friction stir welding of aluminum to copper,” Metals, 8(85), 1 – 9 (2018).

13.

I. Golubev, A. Naumov, and V. Michailov, “Developing finite element model of the friction stir welding for temperature calculation,” in: METAL 2014, Proc. 23rd Int. Conf. on Metallurgy and Materials (2014), pp. 1242 – 1248.

14.

I. A. Golubev, A. A. Naumov, E. V. Chernikov, et al., “Research of temperature distribution during friction stir welding of 2 mm AW 6082 sheets,” in: METAL 2015, Proc. 24th Int. Conf. on Metallurgy and Materials (2015), pp. 1433 – 1439.

15.

I. A. Golubev, A. A. Naumov, E. V. Chernikov, et al., “Temperature distribution and welding distortion measurements after FSW of Al 6082-T6 sheets,” Friction Stir Weld. Proc., VIII, 289 – 295 (2016).

16.

I. A. Golubev, I. N. Morozova, A. A. Naumov, et al., “Numerical simulation and experimental investigation of impulse friction stir welding of 6082-T6 aluminum alloy,” in: Mater. Sci. Technol. Conf. Exhibition 2017, MS and T (2017), Vol. 2, pp. 987 – 994.

Title: Microstructure and Mechanical Properties of Dissimilar Al – Cu Joints Formed by Friction Stir Welding
Authors: E. N. Ryl’kov
F. Yu. Isupov
A. A. Naumov
O. V. Panchenko
A. I. Shamshurin
Publication date: 18-04-2019
Publisher: Springer US
Published in: Metal Science and Heat Treatment / Issue 11-12/2019
Print ISSN: 0026-0673
Electronic ISSN: 1573-8973
DOI: https://doi.org/10.1007/s11041-019-00348-8

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 11-12/2019

Synthesis and Investigation of Quaternary Quasi-Crystalline Phase in Al – Cu – Fe – Cr Alloys

Effect of Heat Treatment on the Structure and Phase Composition of a High-Temperature Nickel Alloy Obtained by Laser Cladding

Crack Resistance of Volume-Hardened Railroad Rails with Transverse Cracks in the Head

Macrostructure and Mechanical Properties of Al – Si, Al – Mg – Si, and Al – Mg – Mn Aluminum Alloys Produced by Electric Arc Additive Growth

Metal Science and Heat Treatment Volume 60, Number 12

Nonmetallic Inclusions in Alloys of the Fe – Co – Ni – Cu – Al – Ti System with Hafnium and Niobium

Premium Partners