Top

Lasers in Manufacturing and Materials Processing

Published in:

01-12-2015

Microstructure and Wear Behavior of Laser Clad Multi-layered Fe-based Amorphous Coatings on Steel Substrates

Authors: Tanaji Paul, S. Habib Alavi, Sourabh Biswas, Sandip P. Harimkar

Published in: Lasers in Manufacturing and Materials Processing | Issue 4/2015

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Single and multi-layered (with two and three layers) coatings of Fe₄₈Cr₁₅Mo₁₄Y₂C₁₅B₆ amorphous alloy were applied to AISI 1018 steel substrates via laser cladding. XRD analysis indicated partial retention of the amorphous phase along with the formation of oxide and carbide phases. Cross-sectional SEM micrographs revealed relatively sound coatings laser clad with single layer of amorphous alloy; however, cracks and voids were observed in the two and three layered amorphous coatings. The specimens with single and two layered amorphous coatings exhibited surface hardness of about 650 VHN while the hardness of the specimens with three layered amorphous coatings (~1100 VHN) nearly equaled the hardness of previously reported sintered amorphous alloys of similar compositions. The ball-on-disc wear analysis demonstrated a reverse trend wherein the single and two layered amorphous coatings exhibited lower weight loss during the wear test cycle due to superior surface soundness while the three layered amorphous coatings showed aggravated wear due to internal voids and cracks.

previous article Laser Controllable Growth of Graphene via Ni-Cu Alloy Composition Modulation

next article Direct Metal Deposition of H13 Tool Steel on Copper Alloy Substrate: Parametric Investigation

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Wesley, W.A., Copson, H.R.: Coating steel with nickel by immersion in nickel chloride solutions. J. Electrochem. Soc. 94, 20–31 (1948)CrossRef

Blum, W., Strausser, P.W.C.: Outdoor exposure tests of electroplated nickel and chromium coatings on steel and nonferrous metals. J. Res. Natl. Bur. Stand. 24, 443–474 (1940)CrossRef

Blum, W., Strausser, P.W.C., Brenner, A.: Corrosion-protective value of electrodeposited zinc and cadmium coatings on steel. J. Res. Natl. Bur. Stand. 16, 185–212 (1936)CrossRef

Harrison, W.N., Moore, D.G., Richmond, J.C.: Ceramic coatings for high-temperature protection of steel. J. Res. Natl. Bur. Stand. 38, 293–307 (1947)CrossRef

Paul, S., Lu, Q., Harvey, M.D.F.: Mitigating localized corrosion using Thermally Sprayed Aluminum (TSA) coatings on welded 25 % Cr superduplex stainless steel. J. Therm. Spray Technol. 24, 629–636 (2015)CrossRef

Pokorny, P., Mastny, L., Sykora, V., Pala, Z., Brozek, V.: Bond strength of plasma sprayed ceramic coatings on the phosphated steels. Metalurgija 54, 411–414 (2015)

Adachi, S., Nakata, K.: Study of bonding strength of plasma-sprayed Ti-Al coating on mild steel substrate. Plasma Process. Polym. 4, S512–S515 (2007)CrossRef

Marulanda Arevalo, J.L., Perez Trujillo, F.J., Castaneda, S.I.: Aluminum-silicon coatings on austenitic stainless steel (AISI 304 and 317) deposited by chemical vapor deposition in a fluidized bed. Ingenieria E Investigacion 34, 5–10 (2014)CrossRef

Inoue, A., Hashimoto, K.: Amorphous and nanocrystalline materials: preparation, properties and applications. Springer, Berlin (2001)CrossRef

10.

Parker, F.T., Spada, F.E., Berkowitz, A.E., Vecchio, K.S., Lavernia, E.J., Rodriguez, R.: Thick amorphous ferromagnetic coatings via thermal spraying of spark-eroded powder. Mater. Lett. 48, 184–187 (2001)CrossRef

11.

Fenineche, N.E., Cherigui, M., Aourag, H., Coddet, C.: Structure and magnetic properties study of iron-based thermally sprayed alloys. Mater. Lett. 58, 1797–1801 (2004)CrossRef

12.

Cherigui, M., Feraoun, H.I., Feninehe, N.E., Aourag, H., Coddet, C.: Structure of amorphous iron-based coatings processed by HVOF and APS thermally spraying. Mater. Chem. Phys. 85, 113–119 (2004)CrossRef

13.

Andrea Milanti, Microstructural Characteristics and Tribological Behavior, Coatings, (2014)

14.

Ye, X., Shin, Y.C.: Synthesis and characterization of Fe-based amorphous composite by laser direct deposition. Surf. Coat. Technol. 239, 34–40 (2014)CrossRef

15.

Otsubo, F., Kishitake, K.: Corrosion resistance of Fe-16%Cr-30%Mo-(C, B, P) amorphous coatings sprayed by HVOF and APS processes. Mater. Trans. 46, 80–83 (2005)CrossRef

16.

Chen, L.H., Chen, H.K., Hsieh, C.T., Shih, Y.H., Chen, I.G., Chen, S.Y., Liu, H.P.: Soft magnetic properties of Co-Fe-Zr-B-Al-O films. J. Appl. Phys. 91, 8450–8452 (2002)CrossRef

17.

Liu, D., Gao, W., Li, Z., Zhang, H., Hu, Z.: Electro-spark deposition of Fe-based amorphous alloy coatings. Mater. Lett. 61, 165–167 (2007)CrossRef

18.

Singh, A., Bakshi, S.R., Agarwal, A., Harimkar, S.P.: Microstructure and tribological behavior of spark plasma sintered iron-based amorphous coatings. Mater. Sci. Eng. a-Struct. Mater. Prop. Microstruct. Process. 527, 5000–5007 (2010)CrossRef

19.

Katakam, S., Santhanakrishnan, S., Dahotre, N.B.: Fe-Based amorphous coatings on AISI 4130 structural steel for corrosion resistance. JOM 64, 709–715 (2012)CrossRef

20.

Zhou, Z., Wang, L., Wang, F.-c., Liu, Y.-b.: Formation and corrosion behavior of Fe-based amorphous metallic coatings prepared by detonation gun spraying. Trans. Nonferrous Metals Soc. China 19, S634–S638 (2009)CrossRef

21.

Basu, A., Sarnant, A.N., Harirnkar, S.P., Majumdar, J.D., Manna, I., Dahotre, N.B.: Laser surface coating of Fe-Cr-Mo-Y-B-C bulk metallic glass composition on AISI 4140 steel. Surf. Coat. Technol. 202, 2623–2631 (2008)CrossRef

22.

A. Bouchareb, B. Bendjemil, R. Piccin, M. Baricco, Influence of Rare-Earth Substitution for Iron in FeCrMoCB Bulk Metallic Glasses, Chinese Physics Letters, 27 (2010)

23.

Ha, H.M., Payer, J.H.: Devitrification of Fe-Based amorphous metal SAM 1651: a structural and compositional study. Metall. Mater. Trans. a-Phys. Metall. Mater. Sci. 40A, 2519–2529 (2009)CrossRef

24.

Katakam, S., Hwang, J.Y., Paital, S., Banerjee, R., Vora, H., Dahotre, N.B.: In situ laser synthesis of fe-based amorphous matrix composite coating on structural steel. Metall. Mater. Trans. a-Phys. Metall. Mater. Sci. 43A, 4957–4966 (2012)CrossRef

25.

Inoue, A., Arnberg, L., Oguchi, M., Backmark, U., Backstrom, N., Masumoto, T.: Preparation of Fe-Cr-Mo-C amorphous powders and microstructure and mechanical-properties of their hot-pressed products. Mater. Sci. Eng. 95, 101–114 (1987)CrossRef

26.

Pantsar, H., Kujanpaa, V.: Diode laser beam absorption in laser transformation hardening of low alloy steel. J. Laser Appl. 16, 147–153 (2004)CrossRef

27.

Singh, A.K., Alavi, S.H., Paital, S.R., Dahotre, N.B., Harimkar, S.P.: Structural relaxation and nanocrystallization-induced laser surface hardening of Fe-Based bulk amorphous alloys. JOM 66, 1080–1087 (2014)CrossRef

28.

H.S. Chou, J.C. Huang, L.W. Chang, T.G. Nieh, Structural relaxation and nanoindentation response in Zr-Cu-Ti amorphous thin films, Applied Physics Letters, 93 (2008)

29.

Murali, P., Ramamurty, U.: Embrittlement of a bulk metallic glass due to sub-T-g annealing. Acta Mater. 53, 1467–1478 (2005)CrossRef

30.

Singh, A., Paital, S.R., Andapally, A., Dahotre, N.B., Harimkar, S.P.: Densification behavior and wear response of spark plasma sintered iron-based bulk amorphous alloys. Adv. Eng. Mater. 14, 400–407 (2012)CrossRef

31.

Zhang, C., Liu, L., Chan, K.C., Chen, Q., Tang, C.Y.: Wear behavior of HVOF-sprayed Fe-based amorphous coatings. Intermetallics 29, 80–85 (2012)CrossRef

Title: Microstructure and Wear Behavior of Laser Clad Multi-layered Fe-based Amorphous Coatings on Steel Substrates
Authors: Tanaji Paul
S. Habib Alavi
Sourabh Biswas
Sandip P. Harimkar
Publication date: 01-12-2015
Publisher: Springer US
Published in: Lasers in Manufacturing and Materials Processing / Issue 4/2015
Print ISSN: 2196-7229
Electronic ISSN: 2196-7237
DOI: https://doi.org/10.1007/s40516-015-0017-0

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 4/2015

Numerical Simulation and Experimental Study of Powder Flow Distribution in High Power Direct Diode Laser Cladding Process

Influence of Ni-P Coated SiC and Laser Scan Speed on the Microstructure and Mechanical Properties of IN625 Metal Matrix Composites

Laser Controllable Growth of Graphene via Ni-Cu Alloy Composition Modulation

Direct Metal Deposition of H13 Tool Steel on Copper Alloy Substrate: Parametric Investigation

Premium Partners