Top

Journal of Materials Engineering and Performance

Published in:

01-10-2013

Microstructures and Properties of Friction Freeform Fabricated Borated Stainless Steel

Authors: J. J. S. Dilip, G. D. Janaki Ram

Published in: Journal of Materials Engineering and Performance | Issue 10/2013

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

A new additive manufacturing process, termed “friction freeform fabrication,” has been recently proposed by the authors. One of the unique capabilities of the process is that it can facilitate fabrication of three-dimensional parts in materials that are difficult to fusion deposit. The current study is a striking demonstration of this, in which cylindrical samples of 40 mm height and 10 mm diameter were successfully produced in borated stainless steel ASTM 304B4, a material known to be very difficult to fusion weld or deposit. Microstructures and mechanical properties of these samples were investigated in detail and were compared to those of standard wrought-processed alloy 304B4 Grade B material.

previous article Effect of Welding Parameters on the Microstructure and Strength of Friction Stir Weld Joints in Twin Roll Cast EN AW Al-Mn1Cu Plates

next article Erosion-Corrosion of Carbon Steel Pipes in Oil Sands Slurry Studied by Weight-Loss Testing and CFD Simulation

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

K.N. Amato, S.M. Gaytan, L.E. Murr, E. Martinez, P.W. Shindo, J. Hernandez, S. Collins, and F. Medina, Microstructures and Mechanical Behavior of Inconel 718 Fabricated by Selective Laser Melting, Acta Mater., 2012, 60(5), p 2229–2239CrossRef

O.L.A. Harrysson, O. Cansizoglu, D.J.M. Little, D.R. Cormier, and H.A. West, II, Direct Metal Fabrication of Titanium Implants with Tailored Materials and Mechanical Properties Using Electron Beam Melting Technology, Mater. Sci. Eng. C, 2008, 28(3), p 366–373CrossRef

I. Palcic, M. Balazic, M. Milfelner, and B. Buchmeister, Potential of Laser Engineered Net Shaping (LENS) Technology, Mater. Manuf. Process., 2009, 24(7-8), p 750–753CrossRef

Z.L. Lu, A.F. Zhang, Z.Q. Tong, X.H. Yang, D.C. Li, and B.H. Lu, Fabricating the Steam Turbine Blade by Direct Laser Forming, Mater. Manuf. Process., 2011, 26(7), p 879–885CrossRef

J.J.S. Dilip, G.D. Janaki Ram, and B.E. Stucker, Additive Manufacturing with Friction Welding and Friction Deposition Processes, Int. J. Rapid Manuf., 2012, 3(1), p 56–69CrossRef

J.J.S. Dilip, S. Babu, S. Varadha Rajan, K.H. Rafi, G.D. Janaki Ram, and B.E. Stucker, Use of Friction Surfacing for Additive Manufacturing, Mater. Manuf. Process., 2013, 28(2), p 189–194CrossRef

S. Grainger and J. Blunt, Engineering Coatings: Design and Application, 2nd ed., Abington Publishing, Cambridge, 1998CrossRef

ASTM Standard A887-89 (2009), “Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application,” ASM International, West Conshohocken, PA, USA

C.V. Robino and M.J. Cieslak, Fusion Welding of Borated Stainless Steels, Report # SAND-93-3981, Sandia National Laboratories, Albuquerque, USA, 1994, doi:10.2172/10183280

10.

C.V. Robino and M.J. Cieslak, Fusion Welding of a Modern Borated Stainless Steel, Weld. J., 1997, 76(1), p 11–23

11.

T.D. Park, K.K. Baek, and D.S. Kim, PWHT Effect on the Mechanical Properties of Borated Stainless Steel GTA Weldments for Nuclear Shield, Met. Mater., 1997, 3(1), p 46–50CrossRef

12.

R. Puli and G.D. Janaki Ram, Microstructures and Properties of Friction Surfaced Coatings in AISI, 440C Martensitic Stainless Steel, Surf. Coat. Technol., 2012, 207, p 310–318CrossRef

13.

C.V. Robino and M.J. Cieslak, High Temperature Metallurgy of Advanced Borated Stainless Steel, Metall. Mater. Trans. A, 1995, 26, p 1673–1685CrossRef

14.

H.K. Rafi, G.D. Janki Ram, G. Phanikumar, and K. Prasad Rao, Microstructure and Properties of Friction Surfaced Stainless Steel and Tool Steel Coatings, Mater. Sci. Forum, 2010, 638-642, p 864–869CrossRef

15.

H.K. Rafi, K. Balasubramaniam, G. Phanikumar, and K. Prasad Rao, Thermal Profiling Using Infrared Thermography in Friction Surfacing, Metall. Mater. Trans. A, 2011, 42, p 3425–3429CrossRef

16.

K. Fukakusa, On the Characteristics of the Rotational Contact Plane—A Fundamental Study of Friction Surfacing, Weld. Int., 1996, 10(7), p 524–529CrossRef

17.

G.M. Bedford, V.I. Vitanov, and I.I. Voutchkov, On the Thermo-Mechanical Events During Friction Surfacing of High Speed Steels, Surf. Coat. Technol., 2001, 141, p 34–39CrossRef

18.

X.M. Liu, Z.D. Zou, Y.H. Zhang, S.Y. Qu, and X.H. Wang, Transferring Mechanism of the Coating Rod in Friction Surfacing, Surf. Coat. Technol., 2008, 202, p 1889–1894CrossRef

19.

H.K. Rafi, G. Phanikumar, and K. Prasad Rao, Material Flow Visualization During Friction Surfacing, Metall. Mater. Trans. A, 2011, 42, p 937–939CrossRef

20.

R. Puli and G.D. Janaki Ram, Dynamic Recrystallization in Friction Surfaced Austenitic Stainless Steel Coatings, Mater. Charact., 2012, 74, p 49–54CrossRef

21.

K. Prasad Rao, A. Veera Sreenu, H.K. Rafi, M.N. Libin, and K. Balasubramanian, Tool Steel and Copper Coatings by Friction Surfacing—A Thermography Study, J. Mater. Process. Technol., 2012, 212, p 402–407CrossRef

22.

H.K. Rafi, N. Kishore Babu, G. Phanikumar, and K. Prasad Rao, Microstructural Evolution During Friction Surfacing of Austenitic Stainless Steel AISI, 304 on Low Carbon Steel, Metall. Mater. Trans. A, 2013, 44, p 345–350CrossRef

23.

R.S. Mishra and Z.Y. Ma, Friction Stir Welding and Processing, Mater. Sci. Eng., 2005, 50(1-2), p 1–78CrossRef

24.

F.J. Humphreys and M. Hatherly, Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier, Oxford, UK, 2004

Title: Microstructures and Properties of Friction Freeform Fabricated Borated Stainless Steel
Authors: J. J. S. Dilip
G. D. Janaki Ram
Publication date: 01-10-2013
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 10/2013
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-013-0605-0

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 10/2013

Macroscopic Mechanical Characterization of SMAs Fiber-Reinforced Hybrid Composite Under Uniaxial Loading

An Insight into Lüders Deformation Using Advanced Imaging Techniques

Effects of the Strain Rate and Temperature on the Microstructural Evolution of Twin-Rolled Cast Wrought AZ31B Alloys Sheets

Numerical Analysis of Friction Stir Welding Process

Factors affecting the Inherent Hardenability of Steel

Past Developments and Future Trends in the Rotary or Orbital Forging Process

Premium Partners