Top

The International Journal of Advanced Manufacturing Technology

Published in:

09-06-2021 | ORIGINAL ARTICLE

Modeling and prediction of cutting temperature in the machining of H13 hard steel of multi-layer coated cutting tools

Authors: Jingjie Zhang, Zhanqiang Liu, Chonghai Xu, Jin Du, Guosheng Su, Peirong Zhang, Xiangfei Meng

Published in: The International Journal of Advanced Manufacturing Technology | Issue 11-12/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The coating effect on the cutting temperature has long been a hot topic in understanding heat transfer mechanism in machining coated tools, and especially the multi-layer coated tools. For multi-layer coated tools, the coating structure, coating thickness, and coating material will affect the cutting temperature of the tools. This paper is devoted to the cutting temperature in dry turning of H13 hardened steel with multi-layer coatings. New analytical models for estimating coating temperature and coating–substrate interface temperature were proposed. The multi-layer coating can be equivalent to mono-layer composite coating, which applies equivalent coating layer approach, and was developed to estimate the cutting temperature in turning by heat transfer model of mono-layer coated tool. The analyzed results were compared with appropriate experimental process data using thermocouples and FEM simulated data. The models can accurately reflect the cutting temperature of two multi-layer coated tools under the same cutting condition.

previous article Comparative analysis of the machining temperatures of an end mill and a novel tool in the orbital drilling of CFRP composites

next article Sustainable reconfigurable manufacturing system design using adapted multi-objective evolutionary-based approaches

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Sandvik C (Firm) (1994) Modern metal cutting: a practical handbook. Sandvik Coromant

Grzesik W, Nieslony P (2004) Physics based modelling of interface temperatures in machining with multilayer coated tools at moderate cutting speeds. Int J Mach Tool Manu 44(9):889–901CrossRef

Grzesik W, Nieslony P (2003) A computational approach to evaluate temperature and heat partition in machining with multilayer coated tools. Int J Mach Tool Manu 43(13):1311–1317CrossRef

Grzesik W, Bartoszuk M, Nieslony P (2004) Finite difference analysis of the thermal behaviour of coated tools in orthogonal cutting of steels. Int J Mach Tool Manu 44(14):1451–1462CrossRef

Kone F, Czarnota C, Haddag B, Nouari M (2011) Finite element modelling of the thermo-mechanical behavior of coatings under extreme contact loading in dry machining. Surf Coat Technol 205(12):3559–3566CrossRef

Ucun İ, Aslantas K (2011) Numerical simulation of orthogonal machining process using multilayer and single-layer coated tools. Int J Adv Manuf Technol 54(9-12):899–910CrossRef

Fahad M (2012) A heat partition investigation of multilayer coated carbide tools for high speed machining through experimental studies and finite element modeling. The University of Manchester, Dissertation

Zhang JJ, Liu ZQ (2017) Transient and steady-state temperature distribution in monolayer-coated carbide cutting tool. Int J Adv Manuf Technol 91:59–67CrossRef

Ferreira DC, dos Santos ME, Brito RF et al (2018) Numerical analysis of the influence of coatings on a cutting tool using COMSOL. Int J Adv Manuf Technol 97(1-4):1305–1314CrossRef

10.

Oliveira GC, Fernandes AP, Guimaraes G (2017) Thermal behavior analysis of coated cutting tool using analytical solutions. J Braz Soc Mech Sci 39(8):3249–3255CrossRef

11.

Zhao J, Liu Z, Shen Q, Wang B, Wang Q (2018) Investigation of cutting temperature during turning Inconel 718 with (Ti, Al) N PVD coated cemented carbide tools. Materials 11(8):1281CrossRef

12.

Bogdan-Chudy M, Nieslony P, Krolczyk G (2018) Investigation of heat distribution in coated indexable tool inserts. Adv Manuf Springer, Cham 661-670

13.

Samani MK, Ding XZ, Khosravian N, Amin-Ahmadi B, Yi Y, Chen G, Neyts EC, Bogaerts A, Tay BK (2015) Thermal conductivity of titanium nitride/titanium aluminum nitride multilayer coatings deposited by lateral rotating cathode arc. Thin Solid Films 578:133–138CrossRef

14.

Samani MK, Ding XZ, Amini S, Khosravian N, Cheong JY, Chen G, Tay BK (2013) Thermal conductivity of titanium aluminum silicon nitride coatings deposited by lateral rotating cathode arc. Thin Solid Films 537:108–112CrossRef

15.

Bouzakis KD, Hadjiyiannis S, Skordaris G et al (2004) The effect of coating thickness, mechanical strength and hardness properties on the milling performance of PVD coated cemented carbides inserts. Surf Coat Technol 177:657–664CrossRef

16.

Ma LW, Cairney JM, Hoffman MJ, Munroe PR (2010) Effect of coating thickness on the deformation mechanisms in PVD TiN coated steel. Surf Coat Technol 204(11):1764–1773CrossRef

17.

Zhang ZJ (2009) Prediction and measurement of cutting temperature for coated tools. Dissertation, Shandong University, Jinan, P. R. China

18.

Grzesik W, Van CA, Luttervelt (2005) Analytical models based on composite layer for computation of tool-chip interface temperatures in machining steels with multilayer coated cutting tools. Annals of the CIRP 54(1):91–94CrossRef

19.

Grzesik W (2006) Composite layer-based analytical models for tool–chip interface temperatures in machining medium carbon steels with multi-layer coated cutting tools. J Mater Process Technol 176(1-3):102–110CrossRef

20.

Yen YC, Jain A, Chigurupati P, Wu WT, Altan T (2004) Computer simulation of orthogonal cutting using a tool with multiple coatings. Mach Sci Technol 8:305–326CrossRef

21.

Wang P, Zhang JJ, Hu YM (2007) The application of H13 steel. Die & Mould Manuf 12:1–7

22.

Grzesik W (1999) Experimental investigation of the cutting temperature when turning with coated indexable inserts. Int J Mach Tool Manu 39(3):355–369CrossRef

23.

Lengauer W, Binder S, Aigner K, Ettmayer P, Guillou A, Debuigne J, Groboth G (1995) Solid state properties of group IVb carbonitrides. J Allor Compd J 217(1):137–147CrossRef

24.

Lovell MR, Bhattacharya S, Zeng R (1998) Modeling of orthogonal machining processes for variable tool-chip interfacial friction using explicit dynamic finite element methods. In: Proceedings of 1st CIRP International Workshop on Modeling of Machining Operations. Atlanta, Georgia, 2B/9

25.

Mimaroglu A, Kocabicak U, Taymaz I, et al. (1999) Study of thermal stresses in diamond and other advanced ceramics coating systems. //Proceedings of 1st Int. Conference on “The” Coatings in Manufacturing Engineering 223-227

26.

Wertheim R, Sivan R, Porat R, Ber A (1982) Characterization of CVD coated carbide layers and their thermal properties. CIRP Ann-Manuf Techn 31(1):7–11CrossRef

27.

Özgür AE, Yalçın B, Koru M (2009) Investigation of the wear performance and thermal diffusivity properties of M41 tools steel coated with various film coatings. Mater Design 30(2):414–417CrossRef

28.

Zhang JJ, Liu ZQ, Du J (2017) Prediction of cutting temperature distributions on rake face of coated cutting tools. Int J Adv Manuf Technol 91:49–57CrossRef

Title: Modeling and prediction of cutting temperature in the machining of H13 hard steel of multi-layer coated cutting tools
Authors: Jingjie Zhang
Zhanqiang Liu
Chonghai Xu
Jin Du
Guosheng Su
Peirong Zhang
Xiangfei Meng
Publication date: 09-06-2021
Publisher: Springer London
Published in: The International Journal of Advanced Manufacturing Technology / Issue 11-12/2021
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-021-07417-4

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 11-12/2021

Experimental research and process parameter optimization of high-speed friction stir welding

Calculation and analysis of rolling force during aluminum alloy thick plate snake/gradient temperature rolling with different roll diameters

Research on laser-assisted orthogonal micromachining technology of Cf/SiC composite

Cylindricity and flatness optimization for mechanical parts in additive manufacturing based on tolerance adaptive slicing

Effectiveness analysis of abrasive flow polishing S-shaped elbow with side holes based on large eddy simulation

Research and prospect of welding monitoring technology based on machine vision

Premium Partners