Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Tribology Letters
Published in: Tribology Letters 3/2021

01-09-2021 | Original Paper

Modeling of the Tribological Behavior of Materials Using Crystal Plasticity Constitutive Model. Effect of Heat Partition and Friction

Authors: K. Akoussan, M. Nouari, A. Moufki

Published in: Tribology Letters | Issue 3/2021

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

A polycrystal model has been developed to study the tribological behavior of an aggregate BCC crystal under extreme contact loading conditions. The polycrystal behavior is defined from the local behavior of a single crystal within the framework of the Hill’s self-consistent scheme by considering the temperature effect. The tribological problem simulated in this work is a contact problem where a pin (tool) moves on a workpiece with a fairly high pressure and large sliding velocity. The results show the importance of the physical parameters as the hardening effect, the restoration of the dislocation and the crystallographic orientations of grains on the contact. The effect of the frictional heat partition and the friction coefficient have been particularly discussed.

Graphic Abstract

previous article Friction and Wear Behaviors of Steel Ball Against Polyimide-PTFE Composite Under Rolling-Sliding Motion
next article Understanding Test Modalities of Tire Grip and Laboratory-Road Correlations with Modeling

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
Moerlooze, K.D., Farid Al-Bender, F., Van Brussel, H.: A generalised asperity-based friction model. Tribol. Lett. 40, 113–130 (2010)CrossRef
2.
Smith, E.H., Arnell, R.D.: A new approach to the calculation of flash temperatures in dry, sliding contacts. Tribol. Lett. 53(3), 407–414 (2013)CrossRef
3.
Smith, E.H., Arnell, R.D.: The prediction of frictional temperature increases in dry, sliding contacts between different materials. Tribol. Lett. 55, 315–328 (2014)CrossRef
4.
Federici, M., Straffelini, G., Gialanella, G.: Pin-on-disc testing of low-metallic friction material sliding against HVOF coated cast iron: modelling of the contact temperature evolution. Tribol. Lett. 65, 121 (2017)CrossRef
5.
Westlund, V., Heinrichs, J., Jacobson, S.: On the role of material transfer in friction between metals: initial phenomena and effects of roughness and boundary lubrication in sliding between aluminium and tool steels. Tribol. Lett. 66, 97 (2018)CrossRef
6.
Abdel-Aal, H.A.: Temperature rise in sliding solids: influence of contact pressure and temperature on thermal conduction. Tribol. Lett. 68, 31 (2020)CrossRef
7.
Yamaguchi, K., Takakura, N., Imatani, S.: Increase in forming limit of sheet metals by removal of surface roughening with plastic strain (Balanced biaxial stretching of aluminium sheets and foils). J. Mater. Process. Technol. 48, 1–4 (1995)CrossRef
8.
Wilson, W.R.D.: Modelling tribology in computer simulations of forming processes. In: Proceedings of the 2nd international conference on tribology in manufacturing processes, 1: 13 (2004)
9.
Becker, R.: Effects of strain localization on surface roughening during sheet forming. Acta Mater. 46, 4 (1998)CrossRef
10.
Raabe, D., Sachtleber, M., Weiland, H., Scheele, G., Zhao, Z.: Grain-scale micromechanics of polycrystal surfaces during plastic straining. Acta Mater 51, 6 (2003)CrossRef
11.
Jain, M., Lloyd, D.J., MacEwen, S.R.: Hardening laws, surface roughness and biaxial tensile limit strains of sheet aluminium alloys. Int. J. Mech. Sci. 38, 2 (1996)CrossRef
12.
Zhao, Z., Radovitzky, R., Cuitiño, A.: A study of surface roughening in fcc metals using direct numerical simulation. Acta Mater. 52, 20 (2004)
13.
Zhao, Z., Ramesh, M., Raabe, D., Cuitiño, A.M., Radovitzky, R.: “Investigation of three-dimensional aspects of grain-scale plastic surface deformation of an aluminum oligocrystal. Int. J. Plast. 24, 12 (2008)CrossRef
14.
Wittridge, N., Knutsen, R.: A microtexture based analysis of the surface roughening behaviour of an aluminium alloy during tensile deformation. Mater. Sci. Eng. A 269, 1 (1999)CrossRef
15.
Osakada, K., Oyane, M.: On the roughening of free surface in deformation processes. Bull. JSME 14, 171 (1971)CrossRef
16.
Guangnan, C., Huan, S., Shiguang, H., Baudelet, B.: Roughening of the free surfaces of metallic sheets during stretch forming. Mater. Sci. Eng. A 128, 1 (1990)CrossRef
17.
Stoudt, M.R., Ricker, R.E.: The relationship between grain size and the surface roughening behavior of Al-Mg alloys. Metall. Mater. Trans. A 33, 2883 (2002)CrossRef
18.
Bowden, F.P., Tabor, D.: Junction growth in metallic friction: the role of combined stresses and surface contamination. Proc. R. Soc. Lond. Ser. A 251, 1266 (1959)
19.
Emmens, W.C., Schoepen, F.: Some frictional aspects of aluminum in sheet metal forming. In: Proc. 19th IDDRG, Eger, 10:14 (1996)
20.
Li, H.J., Jiang, Z.Y., Wei, D.B.: Crystal plasticity finite modelling of 3D surface asperity flattening in uniaxial planar compression. Tribol. Lett. 46, 101 (2012)CrossRef
21.
Li, H.J., Jiang, Z.Y., Wei, D.B.: Study on effect of strain rate on 3D surface asperity flattening in uniaxial planar compression by crystal plasticity finite element modelling. Wear 301, 1 (2013)CrossRef
22.
Li, H.J., Jiang, Z.Y., Wei, D.B.: Influence of friction on surface asperity flattening process in cold uniaxial planar compression (CUPC). Tribol. Int. 66, 282 (2013)CrossRef
23.
Wang, D.W., Mo, J.L., Ouyang, H., Zhou, Z.R.: Improving dynamic and tribological behaviours by means of a Mn–Cu damping alloy with grooved surface features. Tribol. Lett. 66, 67 (2018)CrossRef
24.
Li, H., Öchsner, A., Wei, D., Ni, G., Jiang, Z.: Crystal plasticity finite element modelling of the effect of friction on surface asperity flattening in cold uniaxial planar compression. Appl. Surf. Sci. 359, 236 (2015)CrossRef
25.
Si, L., Lu, Y., Huynh, C., Tieu, N.N., Liu, X.H., Simulation of rolling behaviour of cubic oriented al single crystal with crystal plasticity FEM. J. Mater. Process. Technol. 201, 1–3 (2008)
26.
Jiang, Z.Y., Xiong, S.W., Tieu, A.K., Jane Wang, Q.: Modelling of the effect of friction on cold strip rolling. J. Mater. Process. Technol. 201, 1 (2008)
27.
Franz, G., Abed-Meraim, F., Lorrain, J.-P., Ben Zineb, T., Lemoine, X., Berveiller, M.: Ellipticity loss analysis for tangent moduli deduced from a large strain elastic–plastic self-consistent model. Int. J. Plast. 25, 2 (2009)
28.
Lorrain, J.P.: Ductility criterion based on ellipticity loss of the elastic-plastic tangent modulus deduced from a self-consistent model, PhD Thesis, Université de Lorraine, (2005)
29.
Lorrain, J.P., Ben Zineb, T., Abed-Meraim, F., Berveiller, M.: Ductility loss modelling for BCC single crystals. Int. J. Form. Process 8, 2–3 (2005)CrossRef
30.
Hill, R., Rice, J.R.: Constitutive analysis of elastic-plastic crystals at arbitrary strain. J. Mech. Phys. Solids 20(6), 401–413 (1972)CrossRef
31.
Franciosi, P., Zaoui, A.: Crystal hardening and the issue of uniqueness. Int. J. Plast. 7, 4 (1991)CrossRef
32.
Franciosi, P.: Etude théorique et expérimentale du comportement élastoplastique de monocristaux métalliques se déformant par glissement: Modélisation pour un chargement complexe quasi-statique,” Ph.D. Thesis, Paris North University, France (1984)
33.
Hoc, T.: Etudes expérimentales et numériques de la localisation de la déformation dans les aciers doux, Ph.D. Thesis, Ecole Centrale de Paris, France (1999)
34.
Essmann, U., Mughrabi, H.: Annihilation of dislocations during tensile tests and cyclic deformation and limit of dislocations densities. Phil. Mag. A 40, 6 (1979)CrossRef
35.
Hill, R.: Generalized constitutive relations for incremental deformation of metal crystals by multislip”. J. Mech. Phys. Solids 14, 2 (1966)
36.
Avevor, Y., Vincent, J., Faure, L., Moufki, A., Philippon, S.: An ALE approach for the chip formation process in high speed machining with transient cutting conditions: Modeling and experimental validation. Int. J. Mech. Sci. 130, 546–557 (2017)CrossRef
37.
Atlati, S., Haddag, B., Nouari, M., Zenasni, M.: Thermomechanical modelling of the tool–workmaterial interface in machining and its implementation using the ABAQUS VUINTER subroutine. Int. J. Mech. Sci. 87, 102–117 (2014)CrossRef
38.
Mckinley, J. Simba, H., Worswick, M.: Constitutive modelling of aluminum clad sheet for warm forming. Int. Deep Frawing Res. Gr. (2009)
39.
Rossiter, J., Brahme, A., Simha, M.H., Inal, K., Mishra, R.: A new crystal plasticity scheme for explicit time integration codes to simulate deformation in 3D microstructures: effects of strain path, strain rate and thermal softening on localized deformation in the aluminum alloy 5754 during simple shear. Int. J. Plast. 26, 12 (2010)CrossRef
40.
Iwakuma, T., Nemat-Nasser, S.: Finite elastic-plastic deformation of polycrystalline metals and composite. Proc. R. Soc. Lond. A 394, 87–119 (1984)CrossRef
41.
Liu, Y., Varghese, S., Ma, J., Yoshino, M., Lu, H., Komanduri, R.: Orientation effects in nanoindentation of single crystal copper. Int. J. Plast. 24, 11 (2008)CrossRef
42.
Lipinski, P., Berveiller, M.: Elastoplasticity of micro-inhomogeneous metals at large strains. Int. J. Plast. 5, 2 (1989)CrossRef
43.
Lipinski, P., Berveiller, M., Reubrez, E., Morreale, J.: Transition theories of elastic-plastic deformation of metallic polycrystals. Arch. Appl. Mech. 65, 291–311 (1995)CrossRef
44.
Hill, R.: Continuum micro-mechanics of elastoplastic polycrystals. J. Mech. Phys. Solids 13, 2 (1965)CrossRef
45.
Hill, R.: Continuum micro-mechanics of elastoplastic polycrystals. J. Mech. Phys. Solids 13, 2 (1965)CrossRef
46.
Hill, R.: A self-consistent mechanics of composite materials. J. Mech. Phys. Solids 13, 4 (1965)
Metadata
Title
Modeling of the Tribological Behavior of Materials Using Crystal Plasticity Constitutive Model. Effect of Heat Partition and Friction
Authors
K. Akoussan
M. Nouari
A. Moufki
Publication date
01-09-2021
Publisher
Springer US
Published in
Tribology Letters / Issue 3/2021
Print ISSN: 1023-8883
Electronic ISSN: 1573-2711
DOI
https://doi.org/10.1007/s11249-021-01484-0

Other articles of this Issue 3/2021

Tribology Letters 3/2021 Go to the issue

Original Paper

A Sticky Situation or Rough Going? Influencing Haptic Perception of Wood Coatings Through Frictional and Topographical Design

Original Paper

Elucidating the Onset of Plasticity in Sliding Contacts Using Differential Computational Orientation Tomography

Original Paper

Structurally Driven Environmental Degradation of Friction in MoS2 Films

Original Paper

Effects of Environmental Moisture and Functional Groups on the Sliding Adhesive Behaviour of Graphene Steps

Original Paper

On Opening Crack Propagation in Viscoelastic Solids

Original Paper

Electric Field Effect on Friction Coefficient of Diamond-Like Carbon Film Heated by Laser Irradiation

Premium Partners

    Image Credits