Top

Polymer Bulletin

Published in:

12-01-2023 | ORIGINAL PAPER

Nano TiO₂-doped sodium alginate/hydroxypropyl methylcellulose synthesis of bionanocomposite membrane and its use in controlled release of anti-cancer drug 5-fluorouracil

Author: Gülşen Taşkın Çakıcı

Published in: Polymer Bulletin | Issue 12/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Today, the disease treatment aims to increase the patient's quality of life, reduce the dose of drugs used, extend the dosing interval, and purify the patient from the side and harmful effects. Controlled drug release systems are the systems that respond best in this respect. In this study, the evaluation of the in vitro release of 5-fluorouracil for the transdermal delivery system of NaAlg/HPMC/TiO₂ biocompatible membranes was investigated. The nanocomposite membrane was prepared by adding TiO₂ nanoparticles to a mixture of sodium alginate and hydroxypropyl methylcellulose polymers. Membranes were analyzed by Fourier Transform Infrared, Scanning Electron Microscopy, Differential Scanning Calorimetry, X-Ray Diffraction, and Thermogravimetric analyses. In addition, water contact angles and mechanical tests of the membranes were carried out. The degree of swelling of the prepared membranes was examined; the highest swelling degree was obtained as 304.9% in pH 5.0 buffer. The effects of crosslinking time, nanoparticle amount, and temperature were investigated in the release studies of 5-FU. The highest drug release was found to be 65.3% at the end of 24 h in membranes containing 5% TiO₂ and crosslinked for 1 h. The release kinetics of 5-FU were evaluated according to four kinetic models, and the release from NaAlg/HPMC/TiO₂ membranes showed conformity with the Korsmeyer–Pappes model.

previous article Adsorption of polycyclic aromatic hydrocarbons (PAHs) by nano-material-reinforced fibrous casings in smoked sausages

next article Tailoring the structural and optical features of (PEO–PVA)/(SrTiO3–CoO) polymeric nanocomposites for optical and biological applications

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Sanson AL, Silva SCR, Martins MCG, Giusti-Paiva A, Maia PP, Martins I (2015) Liquid-liquid extraction combined with high-performance liquid chromatography diode array-ultra-violet for simultaneous determination of antineoplastic drugs in plasma. Braz J Pharm Sci 47:363–371CrossRef

Longley D, Harkin DP, Johnston PG (2003) 5-Fluorouracil: mechanisms of action and clinical strategies. Nat Rev Cancer 3:330–338CrossRefPubMed

Saif MW, Choma A, Salamone SJ, Chu E (2009) Pharmacokinetically guided dose adjustment of 5-fluorouracil: a rational approach to improving therapeutic outcomes. J Natl Cancer Inst 101:1543–1552CrossRefPubMed

Sweetman S (2005) Martindale: the complete drug reference. 34th ed. The Pharmaceutical Press. Electronic version, London

Ritthidej GC, Leesajakul W (1996) Chitosan as rate-controlling membrane in isosorbide dinitrate transdermal patch. In: Proceeding of the 23rd international symposium on controlled release bioactive materials, Kyoto, Japan, pp 202–203

Jain D, Bar-Shalom D (2014) Alginate drug delivery systems: application in context of pharmaceutical and biomedical research. Drug Dev Ind Pharm 40:1576–1584CrossRefPubMed

Don TM, Huang ML, Chiu AC, Kuo KH, Chiu WY, Chiu LH (2008) Preparation of thermo-responsive acrylic hydrogels useful for the application in transdermal drug delivery systems. Mater Chem Phys 107:266–273CrossRef

Ding P, Huang KL, Li GY, Liu YF (2007) Preparation and properties of modified chitosan as potential matrix materials for drug sustained-release beads. Int J Biol Macromol 41:125–131CrossRefPubMed

Seal L, Otero TC, Panitch A (2001) Polymeric biomaterials for tissue and organ regeneration. Mater Sci Eng 34:147–230CrossRef

10.

Rasmussen MR, Snabe T, Pedersen LH (2003) Numerical modelling of insulin and amyloglucosidase release from swelling Ca-alginate beads. J Control Release 91:395–405CrossRefPubMed

11.

Reyes N, Rivas-Ruiz I, Domínguez-Espinosa R, Solís S (2006) Influence of immobilization parameters on endopolygalacturonase productivity by hybrid Aspergillus sp. HL entrapped in calcium alginate. Biochem Eng J 32:43–48CrossRef

12.

Marani PL, Bloisi GD, Petri DFS (2015) Hydroxypropylmethyl cellulose films crosslinked with citric acid for control release of nicotine. Cellulose 22:3907–3918CrossRef

13.

Zhang L, Zhao Y, Qian JY (2017) Relationship between multi-scale structures and properties of photophobic films based on hydroxypropyl methylcellulose and monosodium phosphate. Carbohydr Polym 174:572–579CrossRefPubMed

14.

Siddaramaiah, Mruthyunjaya Swamy TM (2007) Studies on miscibility of sodium alginate/polyethylene glycol blends. J Macromol Sci Pure Appl Chem A44(3):321–327CrossRef

15.

Kalyani S, Smitha B, Sridhar S, Krishnaiah A (2006) Blend membranes of sodium alginate and hydroxyethylcellulose for pervaporation-based enrichment of t-butyl alcohol. Carbohydr Polym 64:425–432CrossRef

16.

Ghosal K, Das A, Das SK, Mahmood S, Ramadan MAM, Thomas S (2019) Synthesis and characterization of interpenetrating polymeric networks-based bio-composite alginate film: a well-designed drug delivery platform. Int J Biol Macromol 130:645–654CrossRefPubMed

17.

Nagarwal RC, Kumar R, Pandit JK (2012) Chitosan coated sodium alginate–chitosan nanoparticles loaded with 5-FU for ocular delivery: in vitro characterization and in vivo study in rabbit eye. Eur J Pharm Sci 47:678–685CrossRefPubMed

18.

Olad ALI, Behboudi S, Entezami A (2012) Preparation, characterization and photocatalytic activity of TiO₂/polyaniline core-shell nanocomposite. Bull Mater Sci 35:801–809CrossRef

19.

Mano SS, Kanehira K, Sonezaki S, Taniguchi A (2012) Effect of polyethylene glycol modification of TiO₂ nanoparticles on cytotoxicity and gene expressions in human cell lines. Int J Mol Sci 13:3703–3717PubMedCentralCrossRefPubMed

20.

Wang J, Liu C, Shuai Y, Cui X, Nie L (2014) Controlled release of anticancer drug using graphene oxide as a drug-binding effector in konjac glucomannan/sodium alginate hydrogels. Colloid Surf B 113:223–229CrossRef

21.

Hasanin MS, El-Sakhawy M, Ahmed HY, Kamel S (2021) Hydroxypropyl methylcellulose/graphene oxide composite as drug carrier system for 5-fluorouracil. Biotechnol J 17:2100183 CrossRef

22.

Reddy LCN, Reddy RSP, Rao KKSV, Subha MCS, Rao CK (2013) Development of polymeric blend microspheres from chitosan-hydroxypropylmethyl, cellulose for controlled release of an anti-cancer drug. J Korean Chem Soc 57:439–446CrossRef

23.

Ma Y, Thurecht KJ, Coombes AGA (2021) Development of enteric-coated, biphasic chitosan/HPMC microcapsules for colon-targeted delivery of anticancer drug-loaded nanoparticles. Int J Pharm 607:121026CrossRefPubMed

24.

Yusefi M, Lee-Kiun MS, Shameli K, Teow SY, Ali RR, Siew KK, Chan HY, Wong MMT, Lim WL, Kuča K (2021) 5-Fluorouracil loaded magnetic cellulose bionanocomposites for potential colorectal cancer treatment. Carbohydr Polym 273:118523CrossRefPubMed

25.

Mattos AC, Altmeyer C, Tominaga TT, Khalil NM, Mainardes RM (2016) Polymeric nanoparticles for oral delivery of 5-fluorouracil: formulation optimization, cytotoxicity assay and pre-clinical pharmacokinetics study. Eur J Pharm Sci 84:83–91CrossRefPubMed

26.

Jeong WY, Kwon M, Choi HE, Kim KS (2021) Recent advances in transdermal drug delivery systems: a review. Biomater Res 25:1–15CrossRef

27.

Mehnath S, Chitra K, Karthikeyan K, Jeyaraj M (2020) Localized delivery of active targeting micelles from nanofibers patch for effective breast cancer therapy. Int J Pharm 584:119412CrossRefPubMed

28.

Sahu P, Kashaw SK, Jain S, Sau S, Iyer AK (2017) Assessment of penetration potential of pH responsive double walled biodegradable nanogels coated with eucalyptus oil for the controlled delivery of 5-fluorouracil: in vitro and ex vivo studies. J Control Release 253:122–136CrossRefPubMed

29.

Yang B, Dong Y, Shen Y, Hou A, Quan G, Pan X, Wu C (2021) Bilayer dissolving microneedle array containing 5-fluorouracil and triamcinolone with biphasic release profile for hypertrophic scar therapy. Bioact Mater 6:2400–2411PubMedCentralCrossRefPubMed

30.

Simon A, Amaro MI, Healy AM, Cabral LM, Sousa VP (2016) Comparative evaluation of rivastigmine permeation from a transdermal system in the Franz cell using synthetic membranes and pig ear skin with in vivo-in vitro correlation. Int J Pharm 512:234–241CrossRefPubMed

31.

Taşkın Çakıcı G (2021) Preparation and characterization of biocompatible membranes based on TiO₂ nanoparticul. Sak Univ J Sci 25(6):1376–1385

32.

Sanlı O, Orhan E, Asman G (2006) Release of salicylic acid through poly (vinyl alcohol)/poly (vinyl pyrrolidone) and poly (vinyl alcohol-g-n-vinyl2-pyrrolidone) membranes. J Appl Polym Sci 102:1244–1253CrossRef

33.

Chalitangkoon J, Wongkittisin M, Monvisa P (2020) Silver loaded hydroxyethylacryl chitosan/sodium alginate hydrogel films for controlled drug release wound dressings. Int J Biol Macromol 159:194–203CrossRefPubMed

34.

Tabanlıgil Calam T, Taşkın Çakıcı G (2022) Optimization of square wave voltammetry parameters by response surface methodology for the determination of Sunset yellow using an electrochemical sensor based on Purpald®. Food Chem 1234

35.

Lin YK, Nguyen VH, Yu JCC, Lee CW, Deng YH, Wu JCS, Chen CL (2017) Biodiesel production by pervaporation-assisted esterification and pre-esterification using graphene oxide/chitosan composite membranes. J Taiwan Inst Chem Eng 79:23–30CrossRef

36.

Zhao KY, Feng LZ, Li ZH, Fu YF, Zhang XX, Wei JF, Wei SX (2014) Preparation, characterization and photocatalytic degradation properties of TiO₂/calcium alginate composite film and the recovery of TiO₂ nanoparticle. RSC Adv 4:51321–51329CrossRef

37.

Luo YB, Li WD, Wang XL, Xu DY, Wang YZ (2009) Preparation and properties of nanocomposites based on poly (lactic acid) and functionalized TiO₂. Acta Mater 57:3182–3191CrossRef

38.

Constantin M, Cristea M, Ascenzi P, Fundueanu G (2011) Lower critical solution temperature versus volume phase transition temperature in thermoresponsive drug delivery systems. Express Polym Lett 5:839–848CrossRef

39.

Boutris C, Chatzi E, Kiparissides C (1997) Characterization of the LCST behaviour of aqueous poly (N-isopropylacrylamide) solutions by thermal and cloud point techniques. Polymer 38:2567–2570CrossRef

40.

Wang L, Ding Y (2015) Creating micro-structured hydrogel-forming polymer films by photopolymerization in an evaporating solvent: compositional and morphological evolutions. Eur Polym J 66:99–107CrossRef

41.

Trongsatitkul T, Budhlall BM (2009) Synthesis of thermoresponsive copolymers of poly(ethylene glycol) and poly(N-isopropyl acrylamide) for cell encapsulation. In: MRS Proceedings 2009:1134–BB08–46

42.

Tang S, Floy M, Bhandari R, Dziubla T, Hilt JZ (2017) Development of novel N-isopropylacrylamide (NIPAAm) based hydrogels with varying content of chrysin multiacrylate. Gels 3:40PubMedCentralCrossRefPubMed

43.

Karewicz A, Zasada K, Szczubiałka K, Zapotoczny S, Lach R, Nowakowska M (2010) Smart alginate–hydroxypropylcellulose microbeads for controlled release of heparin. Int J Pharm 385:163–169CrossRefPubMed

44.

Hanlan J, Skoog DA, West DM (1973) Principles of instrumental analysis. Stud Conserv. https://doi.org/10.2307/1505543CrossRef

45.

Liu X, Yu L, Liu H, Chen L, Li L (2008) In situ thermal decomposition of starch with constant moisture in a sealed system. Polym Degrad Stab 93:260–262CrossRef

46.

Shao X, Sun H, Zhou R, Zhao B, Shi J, Jiang R, Dong Y (2020) Effect of bovine bone collagen and nano-TiO₂ on the properties of hydroxypropyl methylcellulose films. Int J Biol Macromol 158:937–944CrossRefPubMed

47.

Saito T, Kuramae R, Wohlert J, Berglund LA, Isogai A (2013) An ultrastrong nanofibrillar biomaterial: the strength of single cellulose nanofibrils revealed via sonication-induced fragmentation. Biomacromolecules 14:248–253CrossRefPubMed

48.

Shaik MR, Alam M, Alandis NM (2015) Development of castor oil based poly (urethane-esteramide)/TiO₂ nanocomposites as anticorrosive and antimicrobial coatings. J Nanomater 16:176

49.

Hussein EM, Desoky WM, Hanafy MF, Guirguis OW (2021) Effect of TiO₂ nanoparticles on the structural configurations and thermal, mechanical, and optical properties of chitosan/TiO₂ nanoparticle composites. J Phys Chem Solids 152:109983CrossRef

50.

Shaari N, Kamarudin SK, Zakaria Z (2019) Potential of sodium alginate/titanium oxide biomembrane nanocomposite in DMFC application. Int J Energy Res 43(14):8057–8069

51.

Alghamdi HM, Rajeh A (2022) Synthesis of carbon nanotubes/titanium dioxide and study of its effect on the optical, dielectric, and mechanical properties of polyvinyl alcohol/sodium alginate for energy storage devices. Int J Energy Res 46:20050–20066CrossRef

52.

Hasanin MS, El-Sakhawy M, Ahmed HY, Kamel S (2022) Hydroxypropyl methylcellulose/graphene oxide composite as drug carrier system for 5-fluorouracil. Biotechnol J 17:2100183CrossRef

53.

Sundarrajan P, Eswaran P, Marimuthu A, Subhadra LB, Kannaiyan P (2012) One pot synthesis and characterization of alginate stabilized semiconductor nanoparticles. Bull Korean Chem Soc 33:3218–3224CrossRef

54.

Zhao J, Yao L, Nie S, Xu Y (2021) Low-viscosity sodium alginate combined with TiO₂ nanoparticles for improving neuroblastoma treatment. Int J Biol Macromol 167:921–933CrossRefPubMed

55.

Sillanpää M, Paunu T-M, Sainio P (2011) Aggregation and deposition of engineered TiO₂ nanoparticles in natural fresh and brackish waters. J Phys Conf Ser 304:012018CrossRef

56.

Zhou JJ, Wang SY, Gunasekaran S (2009) Preparation and characterization of whey protein film incorporated with TiO₂ nanoparticles. J Food Sci 74:50–56CrossRef

57.

Li Y, Jiang Y, Liu F, Ren F, Zhao G, Leng X (2011) Fabrication and characterization of TiO₂/whey protein isolate nanocomposite film. Food Hydrocoll 25:1098–1104CrossRef

58.

Termonia Y (1990) Tensile strength of discontinuous fibre-reinforced composites. J Mater Sci 25:4644–4653CrossRef

59.

Ren J, Wang S, Gao C, Chen X, Li W, Peng F (2015) PVA/xylan composite films containing TiO₂ with improved mechanical properties, high hydrophobicity, and UV protection performance. Cellulose 22:593–602CrossRef

60.

Oleyaei SA, Zahedi Y, Ghanbarzadeh B, Moayedi AA (2016) Modification of physicochemical and thermal properties of starch films by incorporation of TiO₂ nanoparticles. Int J Biol Macromol 89:256–264CrossRefPubMed

61.

Roger S, Talbot D, Bee A (2006) Preparation and effect of Ca²⁺ on water solubility, particle release and swelling properties of magnetic alginate films. J Magn Magn Mater 305:221–227CrossRef

62.

Liu C, Xiong H, Chen X, Lin S, Tu Y (2015) Effects of nano-TiO₂ on the performance of high-amylose starch based antibacterial films. J Appl Polym Sci 132:42339–42345CrossRef

63.

Zolfi M, Khodaiyan F, Mousavi M, Hashemi M (2014) Development and characterization of the kefiran-whey protein isolate-TiO₂ nanocomposite films. Int J Biol Macromol 65:340–345CrossRefPubMed

64.

Naik K, Chandran VG, Rajashekaran R, Waigaonkar S, Kowshik M (2016) Mechanical properties, biological behaviour and drug release capability of nano TiO₂-HAp-Alginate composite scaffolds for potential application as bone implant material. J Biomater Appl 31:387–399CrossRefPubMed

65.

Hanafy MS, Desoky WM, Hussein EM, El-Shaer NH, Gomaa M, Gamal AA, Esawy MA, Guirguis OW (2021) Biological applications study of bio-nanocomposites based on chitosan/TiO₂ nanoparticles polymeric films modified by oleic acid. J Biomed Mater Res 109:232–247CrossRef

66.

Berkkan A, Kondolot Solak E, Asman G (2021) Starch-based membranes for controlled release of 5-fluorouracil in vitro. Chem Sel 6:5678–5684

67.

Aytac Z, Kusku SI, Durgun E, Uyar T (2016) Quercetin/β-cyclodextrin inclusion complex embedded nanofibres: slow release and high solubility. Food Chem 197:864–871CrossRefPubMed

68.

Zhou T, Li J, Liu P (2018) Ionically crosslinked alginate-based nanohydrogels for tumor-specific intracellular triggered release: effect of chemical modification. Colloids Surf A 553:180–186CrossRef

69.

Otitoju TA, Ahmadipour M, Li S, Shoparwe NF, Jie LX, Owolabi AL (2020) Influence of nanoparticle type on the performance of nanocomposite membranes for wastewater treatment. J Water Proc Eng 36:101356CrossRef

70.

Sanli O, Kahraman A, Kondolot Solak E, Olukman M (2016) Preparation of magnetite-chitosan/methylcellulose nanospheres by entrapment and adsorption techniques for targeting the anti-cancer drug 5-fluorouracil. Artif Cell Nanomed B 44:950–959

71.

Shahzad A, Khan A, Afzal Z, Umer MF, Khan J, Khan GM (2019) Formulation development and characterization of cefazolin nanoparticles-loaded cross-linked films of sodium alginate and pectin as wound dressings. Int J Biol Macromol 124:255–269CrossRefPubMed

72.

Fe RN, Filho M, Vasconcelos NF, Rosa MF, Vieir RS (2020) Papain immobilized on alginate membrane for wound dressing application. Colloid Surf B 194:111222CrossRef

73.

Siepmann J, Peppas NA (2012) Modeling of drug release from delivery systems based on hydroxypropyl methylcellulose (HPMC). Adv Drug Deliv Rev 64:163–174CrossRef

Title: Nano TiO2-doped sodium alginate/hydroxypropyl methylcellulose synthesis of bionanocomposite membrane and its use in controlled release of anti-cancer drug 5-fluorouracil
Author: Gülşen Taşkın Çakıcı
Publication date: 12-01-2023
Publisher: Springer Berlin Heidelberg
Published in: Polymer Bulletin / Issue 12/2023
Print ISSN: 0170-0839
Electronic ISSN: 1436-2449
DOI: https://doi.org/10.1007/s00289-023-04674-z

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 12/2023

Boron nitride nanosheets dispersed biopolymer solution as an effective copper corrosion inhibitor in acidic medium

An all-biomass adsorbent: competitive removal and correlative mechanism of Cu2+, Pb2+, Cd2+ from multi-element aqueous solutions

The importance of polyurethane/carbon nanotubes composites fabrication method to mimic mechanical behavior of different types of soft tissues

Advances in cryostructures and their applications in biomedical and pharmaceutical products

Insights into anhydride-cured epoxy resin system using dynamic chemo-rheological modeling

Characterization of OSA starch-based films with nut-byproducts extracts for potential application as natural wound dressing

Premium Partners