Top

Advances in Manufacturing

Published in:

18-10-2023

Non-contact and full-field online monitoring of curing temperature during the in-situ heating process based on deep learning

Authors: Qiang-Qiang Liu, Shu-Ting Liu, Ying-Guang Li, Xu Liu, Xiao-Zhong Hao

Published in: Advances in Manufacturing | Issue 1/2024

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Online monitoring of the curing temperature field is essential to improving the quality and efficiency of the manufacturing process of composite parts. Traditional embedded sensor-based technologies have difficulty monitoring the full temperature field or have to introduce heterogeneous items that could have an undesired impact on the part. In this paper, a non-contact, full-field monitoring method based on deep learning that predicts the internal temperature field of composite parts in real time using surface temperature measurements of auxiliary materials is proposed. Using the proposed method, an average temperature monitoring accuracy of 97% is achieved in various heating patterns. In addition, this method also demonstrates satisfying feasibility when a stronger thermal barrier covers the part. This method was experimentally validated during the self-resistance electric heating process, in which the monitoring accuracy reached 93.1%. This method can potentially be applied to automated manufacturing and process control in the composites industry.

previous article In-situ powder mixing for laser-based directed energy deposition of functionally graded materials

next article Two-dimensional precise figuring of 500 mm-long X-ray mirror using one-dimensional ion beam system

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Available only for authorised users

Kim M, Sung DH, Kong K et al (2016) Characterization of resistive heating and thermoelectric behavior of discontinuous carbon fiber-epoxy composites. Compos B-Eng 90:37–44CrossRef

Joseph C, Viney C (2000) Electrical resistance curing of carbon-fibre/epoxy composites. Compos Sci Technol 60:315–319CrossRef

Xia T, Zeng D, Li Z et al (2018) Electrically conductive GNP/epoxy composites for out-of-autoclave thermoset curing through Joule heating. Compos Sci Technol 164:304–312CrossRef

Liu S, Li Y, Shen Y et al (2019) Mechanical performance of carbon fiber/epoxy composites cured by self-resistance electric heating method. Int J Adv Manuf Tech 103:3479–3493CrossRef

Zhou J, Li Y, Zhu Z et al (2022) Microwave heating and curing of metal-like CFRP laminates through ultrathin and flexible resonance structures. Compos Sci Technol 218:109200. https://doi.org/10.1016/j.compscitech.2021.109200

Naik TP, Singh I, Sharma AK (2022) Processing of polymer matrix composites using microwave energy: a review. Compos Part A-Appl S 156:106870. https://doi.org/10.1016/j.compositesa.2022.106870

Li N, Li Y, Jelonnek J et al (2017) A new process control method for microwave curing of carbon fibre reinforced composites in aerospace applications. Compos B- Eng 122:61–70CrossRef

Chen J, Wang Y, Liu F et al (2020) Laser-induced graphene paper heaters with multimodally patternable electrothermal performance for low-energy manufacturing of composites. ACS Appl Mater Inter 12:23284–23297CrossRef

Tu R, Liu T, Steinke K et al (2022) Laser induced graphene-based out-of-autoclave curing of fiberglass reinforced polymer matrix composites. Compos Sci Technol 226:109529. https://doi.org/10.1016/j.compscitech.2022.109529

10.

Shen Y, Lu Y, Liu S et al (2022) Temperature distribution analysis of carbon fiber reinforced polymer composites during self-resistance electric heating process. J Reinf Plast Comp 41(19/20):805–821CrossRef

11.

Zobeiry N, Park J, Poursartip A (2019) An infrared thermography-based method for the evaluation of the thermal response of tooling for composites manufacturing. J Compos Mater 53:1277–1290CrossRef

12.

Dolkun D, Wang H, Wang H et al (2020) Influence of large framed mold placement in autoclave on heating performance. Appl Compos Mater 27:811–837ADSCrossRef

13.

Zhou J, Li Y, Li N et al (2018) A multi-pattern compensation method to ensure even temperature in composite materials during microwave curing process. Compos Part A-Appl S 107:10–20CrossRef

14.

Shen Y, Lu Y, Liu S et al (2022) Self-resistance electric heating of shaped CFRP laminates: temperature distribution optimization and validation. Int J Adv Manuf Technol 121:1755–1768CrossRef

15.

Zhang B, Li Y, Liu S et al (2021) Layered self-resistance electric heating to cure thick carbon fiber reinforced epoxy laminates. Polym Compos 42:2469–2483CrossRef

16.

Eriksen A, Osinski D, Hjelme DR (2014) Evaluation of thermal imaging system and thermal radiation detector for real-time condition monitoring of high power frequency converters. Adv Manuf 2:88–94CrossRef

17.

Huang XK, Tian XY, Zhong Q et al (2020) Real-time process control of powder bed fusion by monitoring dynamic temperature field. Adv Manuf 8:380–391CrossRef

18.

Li F, Yu ZH, Li H et al (2022) Real-time monitoring of raster temperature distribution and width anomalies in fused filament fabrication process. Adv Manuf 10:571–582CrossRef

19.

Konstantopoulos S, Tonejc M, Maier A et al (2015) Exploiting temperature measurements for cure monitoring of FRP composites—applications with thermocouples and infrared thermography. J Reinf Plast Comp 34:1015–1026CrossRef

20.

Ito Y, Minakuchi S, Mizutani T et al (2012) Cure monitoring of carbon–epoxy composites by optical fiber-based distributed strain–temperature sensing system. Adv Compos Mater 21:259–271CrossRef

21.

Hübner M, Lang W (2017) Online monitoring of composites with a miniaturized flexible combined dielectric and temperature sensor. In: Multidisciplinary digital publishing institute proceedings, Paris, France, 2017, 1, p 627. https://doi.org/10.3390/proceedings1040627

22.

Ramakrishnan M, Rajan G, Semenova Y et al (2016) Overview of fiber optic sensor technologies for strain/temperature sensing applications in composite materials. Sensors 16:99. https://doi.org/10.3390/s16010099ADSCrossRefPubMedPubMedCentral

23.

Bagavathiappan S, Lahiri BB, Saravanan T et al (2013) Infrared thermography for condition monitoring—a review. Infrared Phys Techn 60:35–55ADSCrossRef

24.

Nash C, Karve P, Adams D et al (2020) Real-time cure monitoring of fiber-reinforced polymer composites using infrared thermography and recursive Bayesian filtering. Compos B-Eng 198:108241. https://doi.org/10.1016/j.compositesb.2020.108241

25.

Zobeiry N, Humfeld KD (2021) A physics-informed machine learning approach for solving heat transfer equation in advanced manufacturing and engineering applications. Eng Appl Artif Intel 101:104232. https://doi.org/10.1016/j.engappai.2021.104232

26.

Humfeld KD, Gu D, Butler GA et al (2021) A machine learning framework for real-time inverse modeling and multi-objective process optimization of composites for active manufacturing control. Compos B-Eng 223:109150. https://doi.org/10.1016/j.compositesb.2021.109150

27.

Wang M, Hu W, Jiang Y et al (2021) Internal temperature prediction of ternary polymer lithium-ion battery pack based on CNN and virtual thermal sensor technology. Int J Energy Res 45:13681–13691CrossRef

28.

Ma H, Hu X, Zhang Y et al (2020) A combined data-driven and physics-driven method for steady heat conduction prediction using deep convolutional neural networks. arXiv preprint arXiv:2005.08119. https://doi.org/10.48550/arXiv.2005.08119

29.

Amini NS, Haghighat E, Campbell T et al (2021) Physics-informed neural network for modelling the thermochemical curing process of composite-tool systems during manufacture. Comput Method Appl M 384:113959. https://doi.org/10.1016/j.cma.2021.113959

30.

Szegedy C, Liu W, Jia Y et al (2015) Going deeper with convolutions. In: Proceedings of the IEEE conference on computer vision and pattern recognition, Boston, MA, USA, 2015, pp 1–9. https://doi.org/10.1109/CVPR.2015.7298594

31.

Alvarez-Ramirez J, Rodriguez E, Carlos Echeverría J (2005) Detrending fluctuation analysis based on moving average filtering. Physica A 354:199–219ADSCrossRef

32.

Shorten C, Khoshgoftaar TM (2019) A survey on image data augmentation for deep learning. J Big Data-Ger 6:60. https://doi.org/10.1186/s40537-019-0197-0CrossRef

Title: Non-contact and full-field online monitoring of curing temperature during the in-situ heating process based on deep learning
Authors: Qiang-Qiang Liu
Shu-Ting Liu
Ying-Guang Li
Xu Liu
Xiao-Zhong Hao
Publication date: 18-10-2023
Publisher: Shanghai University
Published in: Advances in Manufacturing / Issue 1/2024
Print ISSN: 2095-3127
Electronic ISSN: 2195-3597
DOI: https://doi.org/10.1007/s40436-023-00455-z

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 1/2024

Two-dimensional precise figuring of 500 mm-long X-ray mirror using one-dimensional ion beam system

Manufacturing task data chain-driven production logistics trajectory analysis and optimization decision making method

Novel intelligent reasoning system for tool wear prediction and parameter optimization in intelligent milling

Grain size effect on the assembly quality of micro-scaled barrel formed by microforming

A data-driven approach to RUL prediction of tools

Process planning and contour-based error compensation for precision grinding of miniature scalpels

Premium Partners