Top

Journal of Materials Engineering and Performance

Published in:

01-10-2014

Non-linear Correlation Between Uniaxial Tensile Properties and Shear-Edge Hole Expansion Ratio

Author: Surajit Kumar Paul

Published in: Journal of Materials Engineering and Performance | Issue 10/2014

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Stretch flanging of steel sheets is an important formability issue for automobile industry. Finite element simulation study confirms that the edge of the hole deforms in a uniaxial tensile manner during the hole expansion process. To understand the effect of various tensile properties on hole expansion ratio, current experimental data and collected data from published work have been used. Yield stress, ultimate tensile stress, coefficient of normal anisotropy, total elongation, and post uniform elongation are closely related to hole expansion ratio. A non-linear relationship between hole expansion ratio and tensile properties (ultimate tensile stress, coefficient of normal anisotropy, and total elongation) is developed in the present investigation.

previous article Hot Ductility and Deformation Behavior of C-Mn/Nb-Microalloyed Steel Related to Cracking During Continuous Casting

next article Effects of Mn Additions on the Structure, Mechanical Properties, and Corrosion Behavior of Cu-Al-Ni Shape Memory Alloys

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

K. Lange, Handbook of Metal Forming, McGraw-Hill Co, New York, 1985

T.-C. Chen, An Analysis of Forming Limit in the Elliptic Hole-Flanging Process of Sheet Metal, J. Mater. Process. Technol., 2007, 192–193, p 373–380CrossRef

Z. Chen, M.J. Worswick, A.K. Pilkey, and D.J. Lloyd, Damage Percolation During Stretch Flange Forming of Aluminum Alloy Sheet, J. Mech. Phys. Solids, 2005, 53, p 2692–2717CrossRef

A. Le Port, S. Thuillier, and P.-Y. Manach, Characterization of Surface Defects After Flanging of Metallic Sheets, J. Mater. Process. Technol., 2011, 211, p 2062–2071CrossRef

F. Stachowicz, Estimation of Hole-Flange Ability for Deep Drawing Steel Sheets, Arch. Civ. Mech. Eng., 2008, 8, p 167–172CrossRef

T. Kuwabara, K. Hashimoto, E. IIzuka, and J.W. Yoon, Effect of Anisotropic Field Functions on the Accuracy of Hole Expansion Simulations, J. Mater. Process. Technol., 2011, 211, p 475–481CrossRef

K. Mori, Y. Abe, and Y. Suzui, Improvement of Stretch Flangeability of Ultra Strength Steel Sheet by Smoothing of Sheared Edge, J. Mater. Process. Technol., 2010, 210, p 653–659CrossRef

B.S. Levy and C.J. Van Tyne, Review of the Shearing Process for Sheet Steels and Its Effect on Sheared-Edge Stretching, J. Mater. Eng. Perform., 2012, 21, p 1205–1213CrossRef

Y.-M. Huang and K.-H. Chien, The Formability Limitation of the Hole-Flanging Process, J. Mater. Process. Technol., 2001, 117, p 45–51

10.

D.-K. Leu, T.-C. Chen, and Y.-M. Huang, Influence of Punch Shape on the Collar-Drawing Process of Sheet Steel, J. Mater. Process. Technol., 1999, 88, p 134–146CrossRef

11.

D.I. Hyun, S.M. Oak, S.S. Kang, and Y.M. Moon, Estimation of Hole Flangeability for High Strength Steel Plates, J. Mater. Process. Technol., 2002, 130–131, p 9–13CrossRef

12.

A. Krichen, A. Kacem, and M. Hbaieb, Blank-Holding Effect on the Hole-Flanging Process of Sheet Aluminum Alloy, J. Mater. Process. Technol., 2011, 211, p 619–626CrossRef

13.

A. Karelova, C. Krempaszky, E. Werner, P. Tsipouridis, T. Hebesberger, and A. Pichler, Hole Expansion of Dual-phase and Complex-phase AHS Steels—Effect of Edge Conditions, Steel Res. Int., 2009, 80(1), p 71–77

14.

X. Fang, Z. Fan, B. Ralph, P. Evans, and R. Underhill, The Relationships Between Tensile Properties and Hole Expansion Property of C-Mn Steels, J. Mater. Sci., 2003, 38, p 3877–3882CrossRef

15.

L. Chen, J. Kim, S.-K. Kim, K.-G. Chin, and B.C. De Cooman, On the Stretch-Flangeability of High Mn TWIP Steels, Mater. Sci. Forum, 2010, 654–656, p 278–281CrossRef

16.

B.S. Levy, M. Gibbs, and C.J. Van Tyne, Failure During Sheared Edge Stretching of Dual-Phase Steels, Met. Trans. A, 2013, 44A, p 3635CrossRef

17.

K. Sugimoto, J. Sakaguchi, T. Iida, and T. Kashima, Stretch-Flangeability of a High-Strength TRIP Type Bainitic Sheet Steel, ISIJ Int., 2000, 40(9), p 920–926CrossRef

18.

L. Chen, J.-K. Kim, S.-K. Kim, G.-S. Kim, K.-G. Chin, and B.C. De Cooman, Stretch-Flangeability of High Mn TWIP Steel, Steel Res. Int., 2010, 81(7), p 552–568CrossRef

19.

M. Sudo and T. Twai, Tetsu-to-Hagane, 1982, 68, p 1185–1194

20.

F. Hairer, C. Krempaszky, P. Tsipouridis, and E. Werner, Proceeding of Materials Science and Technology (MS&T) Conference and Exhibition, Oct. 25–29 2009, Pittsburgh, USA, 2009, p 1391–1401

21.

J. Lee, S.-J. Lee, and B.C. De Cooman, Effect of Micro-Alloying Elements on the Stretch-Flangeability of Dual Phase Steel, Mater. Sci. Eng. A, 2012, 536, p 231–238CrossRef

22.

B.S. Levy and C.J. Van Tyne, Effect of a Strain-Hardening Rate at Uniform Elongation on Sheared Edge Stretching, J. Mater. Eng. Perform., 2012, 21, p 2147–2154CrossRef

23.

Y.-M. Huang, An Elasto-Plastic Finite Element Analysis of the Sweet Metal Stretch Flanging Process, Int. J. Adv. Manuf. Technol., 2007, 34, p 641–648CrossRef

24.

Y.K. Ko, J.S. Lee, H. Huh, H.K. Kim, and S.H. Park, Prediction of Fracture in Hub-Hole Expanding Process Using a New Ductile Fracture Criterion, J. Mater. Process. Technol., 2007, 187–188, p 358–362CrossRef

25.

M.J. Worswick and M.J. Finn, The Numerical Simulation of Stretch Flange Forming, Int. J. Plast, 2000, 16, p 701–720CrossRef

26.

S.K. Paul, M. Mukherjee, S. Kundu, and S. Chandra, Prediction of Hole Expansion Ratio for automotive grade steels. Comput. Mater. Sci., 2014, 89, p 189–197

27.

K. Chung, N. Ma, T. Park, D. Kim, D. Yoo, and C. Kim, A Modified Damage Model for Advanced High Strength Steel Sheets, Int. J. Plast, 2011, 27, p 1485–1511CrossRef

28.

P. Sartkulvanich, B. Kroenauer, R. Golle, A. Konieczny, and T. Altan, Finite Element Analysis of the Effect of Blanked Edge Quality Upon Stretch Flanging of AHSS, CIRP Ann. Manuf. Technol., 2010, 59, p 279–282CrossRef

29.

A. Kacem, A. Krichen, P.Y. Manach, S. Thuillier, and J.W. Yoon, Failure Prediction in the Hole-Flanging Process of Aluminium Alloys, Eng. Fract. Mech., 2013, 99, p 251–265CrossRef

30.

S. Sadagopan, C. Wong, M. Huang, B. Yan, and D. Urban, Formability Characterization of a New Generation of High Strength Steels, Report No. 0012, American Iron and Steel Institute Technology Roadmap Program Office, Pittsburgh, PA, USA, 2003.

31.

R.D. Adamczyk and G.M. Michal, Sheared Edge Extension of High-Strength Cold-Rolled Steels, J. Appl. Metalwork., 1986, 4(2), p 157–163CrossRef

32.

R.J. Comstock, Jr., D.K. Scherrer, and R.D. Adamczyk, Hole Expansion in a Variety of Sheet Steels, J. Mater. Eng. Perform., 2006, 15, p 675–683CrossRef

33.

ASTM, Annual Book of ASTM Standards, ASTM Designation E 8, ASTM, Philadelphia, PA, 1989, 03(01), p 131–146

34.

ISO 16630:2009, Metallic Materials—Sheet and Strip—Hole Expanding Test (2009).

35.

ABAQUS (User’s Manual (version 6.7)), Hibbit, Karlsson & Sorensen Inc., USA (2007)

36.

S.K. Paul, Predicting the Flow Behavior of Metals Under Different Strain Rate and Temperature Through Phenomenological Modeling, Comput. Mater. Sci., 2012, 65, p 91–99CrossRef

37.

E. El-Magd and M. Abouridouane, Einfluss der Umformgeschwindigkeit und -temperatur auf das Fließverhalten der Magnesiumlegierung AZ80, Z. Zeitschrift Fur Metallkunde, 2001, 92(1), p 1231–1235

38.

ECSC Report. EUR 22380 EN: Crash Relevant Properties and Dynamic Denting of Pre-strained or Pre-loaded High Strength Steels for Automotive Parts www.bookshop.europa.eu, (2006).

39.

W.S. Lee and H.F. Lam, The Deformation Behaviour and Microstructure Evolution of High Strength Alloy Steel at High Rate of Strain, J. Mater. Process. Technol., 1996, 57, p 233–240CrossRef

40.

J.H. Sung, J.H. Kim, and R.H. Wagoner, A Plastic Constitutive Equation Incorporating Strain, Strain-Rate, and Temperature, Int. J. Plast., 2010, 26, p 1746–1771CrossRef

41.

B.S. Levy and C.J. Van Tyne, Failure During Sheared Edge Stretching, J. Mater. Eng. Perform., 2008, 17, p 842–848CrossRef

Title: Non-linear Correlation Between Uniaxial Tensile Properties and Shear-Edge Hole Expansion Ratio
Author: Surajit Kumar Paul
Publication date: 01-10-2014
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 10/2014
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-014-1161-y

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 10/2014

Interface Phenomena and Bonding Mechanism in Magnetic Pulse Welding

Creep Behavior of Hydrogenated Zirconium Alloys

Ni-W Electrodeposited Coatings on Low Carbon Steel Substrate: Fatigue Observations

Microstructure and Toughness of Simulated Heat-Affected Zone of Laser Welded Joint for 960 MPa Grade High Strength Steel

Fabrication of Bioceramic Bone Scaffolds for Tissue Engineering

Evaluation of Microstructure and Mechanical Properties in Dissimilar Austenitic/Super Duplex Stainless Steel Joint

Premium Partners