Top

Published in:

2019 | OriginalPaper | Chapter

19. Optimization of Turning Process Parameters Using PSI-Based Desirability-Grey Analysis

Authors : Ch. Maheswara Rao, P. Srinivasa Reddy, D. Suresh, R. Jagadeesh Kumar

Published in: Recent Advances in Material Sciences

Publisher: Springer Singapore

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The present work is to explore the effect of process parameters on the multiple responses of material removal rate and surface roughness concurrently. The speed, feed, depth of cut and nose radius are taken as the controllable process parameters, and the Taguchi standard L16 orthogonal array has been followed for conducting the experiments on medium carbon steel EN24. A hybrid multi-criteria decision-making approach called preference selection index (PSI) method coupled with desirability-grey analysis and ANOVA are employed for the optimization. From the results, the optimal combination of process parameters is obtained at 1500 rpm, 0.05 mm/rev, 0.3 and 0.4 mm of speed, feed, depth of cut and nose radius, respectively.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Fabrication and Corrosion Behaviour of Aluminium Hybrid and Non-hybrid MMCs Reinforced with B4C and Gr Additions by Powder Metallurgy Technique

next chapter Effect of Chemical Treatment on the Mechanical Properties of Okra-Fiber-Reinforced Epoxy Composites

Vikas, A., Roy, Kumar, Kumar, K.: Effect and optimization of machine process parameters on material removal rate in EDM for EN41 material using taguchi. Int. J. Mech. Eng. Comput. Appl. 1(5), 35–39 (2013)

Bheem, S.R., Dharma Ram, M., Shrivastava, S.: Investigating the effect of cutting parameters on average surface roughness and material removal rate during turning of metal matrix composite using response surface methodology. 3(1), 241–247 (2015)

Shivam, G., Varanpal Singh, K., Yadav, P.: Experimental study of turning operation and optimization of MRR and surface roughness using taguchi method. Int. J. Innovative Res. Adv. Eng. 3(3), 44–50 (2016)

Dave, H.K., Patel, L.S., Raval, H.K.: Effect of machining conditions on MRR and surface roughness during CNC turning of different materials using TiN coated cutting tools by taguchi method. Int. J. Ind. Eng. Comput. 3, 925–930 (2012)

Kaladhar, M., Venkata Subbaiah, K., Srinivasa Rao, Ch.: Parametric optimization during machining of AISI 304 austenitic stainless steel using CVD coated DURATOMIC cutting insert. Int. J. Ind. Eng. Comput. 3, 577–586 (2012)CrossRef

Maheswara Rao, Ch., Venkata Subbaiah, K., Sowjanya, K.: Influence of speed, feed and depth of cut on multiple responses in CNC turning. Int. J. Adv. Sci. Technol. 92, 59–76 (2016). ISSN: 2005-4238

Ranganath, M.S., Vipin, R.S., Mishra, R.S., Prateek, R., Nikhil, G.: Optimization of surface roughness in CNC turning of aluminium 6061 using taguchi techniques. Int. J. Mod. Eng. Res. (IJMER) 5(5), 42–50 (2015)

Kamal, J., Grover, S., Aggarwal, A.: Simultaneous optimization of material removal rate and surface roughness for WEDM of WCCo composite using grey relational analysis along with taguchi method. Int. J. Ind. Eng. Comput. 2, 479–490 (2011)

Kumar, H., Abbas, M., Mohammad, A., Zakir Jafri, H.: Optimization of cutting parameters in CNC turning. Int. J. Eng. Res. Appl. 3(3), 331–334 (2013)

10.

Maheswara Rao, Ch., Venkatasubbaiah, K., Jagadeeswara Rao, K.: Experimental investigation of surface roughness characteristics Ra, Rq and Rz. Int. J. Hybrid Inf. Technol. 9(7), 373–388 (2016)CrossRef

11.

Singh, H., Kumar, P.: Optimizing feed force for turned parts through the taguchi technique. Sadana 31(6), 671–681 (2006)

12.

Thamizhmanii, S., Saparudin, S., Hasan, S.: Analysis of surface roughness by turning process using taguchi method. J. Achievements Mater. Manuf. 20(1–2), 503–506 (2007)

13.

Varma, J., Agarwal, P., Bajpai, L.: Turning parameter optimization for surface roughness of ASTM A242 type-1 alloy steel by taguchi method. Int. J. Adv. Eng. Technol. (2012)

14.

Vikas, A.K.R., Kumar, K.: Effect and optimization of various machine process parameters on the surface roughness in EDM for an EN41 material using grey-taguchi. Procedia Mater. Sci. 6, 383–390 (2014)CrossRef

15.

Zhou, J.M., Andersson, M., Stahl, J.E.: Identification of cutting errors in precision hard turning process. J. Mater. Process. Technol. 153–154, 746–750 (2017)

16.

Gupta, R., Diwedi, A.: Optimization of surface finish and material removal rate with different insert nose radius for turning operation on CNC turning centre. Int. J. Innovative Res. Sci. Eng. Technol. 3(6), 13540–13547 (2014)

17.

Selvaraj, D., Chandramohan, P.: Optimization of surface roughness of AISI304 austenitic stainless steel in dry turning operation using taguchi design method. J. Eng. Sci. Technol. 5(3), 293–301 (2010)

18.

Mahapatra, S.S., Patnaik, A.: Optimization of Wire electrical discharge machining (WEDM) process parameters using taguchi method. Int. J. Adv. Manuf. Technol. 34, 911–925 (2007)CrossRef

19.

Maheswara Rao, Ch., Venkata Subbaiah, K.: Optimization of surface roughness in CNC turning using taguchi method and ANOVA. Int. J. Adv. Sci. Technol. 93, 1–14 (2016). ISSN: 2005-4238

20.

Pavan Kumar Reddy, K., Rameswara Reddy, Y., Vishnuvardhan Reddy, R.: Optimization of surface roughness and MRR in turning operation using extended taguchi method. Int. J. Eng. Res. 3(1), 92–96 (2014)

21.

Vijaya Kumar, H.K., Aboobaker, S., Muhammed, S.; Optimization of turning parameters using taguchi technique for MRR and surface roughness of hardened AISI 52100 steel. Int. J. Eng. Res. Appl. 4(5, 6), 39–44 (2014)

22.

Chakadhar, D., Venu Gopal, A.: Multi objective optimization of electro chemical machining of EN31 steel by grey relational analysis. Int. J. Model. Optim. 1, 113–117 (2011)

23.

Tiwari, M., Mausam, K., Sharma, K., Pratap Singh, R.: Investigate the optimal combination of process parameters for EDM by using a grey relational analysis. Elsevier J. Procedia Mater. Sci. 5, 1736–1744 (2014)CrossRef

24.

Kanta Das, D., Kumar Sahoo, A., Das, R., Routara, B.C.: Investigations on hard turning using coated carbide insert: grey based taguchi and regression methodology. Elsevier J. Procedia Mater. Sci. 6, 1351–1358 (2014)CrossRef

25.

Maheswara Rao, Ch., Venkata Subbaiah, K.: Effect and optimization of EDM process parameters on surface roughness for EN41 steel. Int. J. Hybrid Inf. Technol. 9(5), 343–358 (2016). ISSN: 1738-9968CrossRef

26.

Maheswara Rao, Ch., Venkata Subbaiah, K.: Application of WSM, WPM and TOPSIS methods for the optimization of multiple responses. Int. J. Hybrid Inf. Technol. 9(10), 59–72 (2016). ISSN: 1738-9968CrossRef

27.

Maheswara Rao, Ch., Venkata Subbaiah, K.: Application of MCDM approach-TOPSIS for the multi objective optimization problem. Int. J. Grid Distrib. Comput. 9(10), 17–32 (2016)CrossRef

28.

Maheswara Rao, Ch., Srikanth, S., Vara Prasad, R., Babji, G.: Simultaneous optimization of roughness parameters using TOPSIS. IJETT 49(3), 150–157 (2017)CrossRef

29.

Sethy, R., Biswas, C.K., Dewangan, S.: Multi response optimization for correlated responses in EDM using principal component analysis. Adv. Mater. Manuf. Charact. 3(1), 207–210 (2013)

30.

Lu, H.S., Chang, C.K., Hawang, N.C., Chung, C.T.: Grey relational analysis coupled with principal component analysis for optimization design of the cutting parameters in high speed end milling. J. Mater. Process. Technol., 3808–3817 (2009)CrossRef

31.

Mahaboob Johny, Sk., Ramya Sri Sai, Ch., Ramakrishna Rao, V., Govind Singh, B.: Multi-response optimization of aluminum alloy using GRA & PCA by employing taguchi method. Int. Res. J. Eng. Technol. 3(1), 680–686 (2016)

32.

Ananthakumar, P., Ramesh, M., Parameshwari: Optimization of turning process parameters using multivariate statistical method-PCA coupled with taguchi method. Int. J. Sci. Eng. Technol. 2(4), 263–267 (2013)

33.

Sanjit, M., Saurav, D., Asish, B., Pradip Kumar, P.: Optimization of CNC end milling process parameters using PCA-based taguchi method. Int. J. Eng. Sci. Technol. 2(1), 92–102 (2010)

34.

Maheswara Rao, Ch., Vara Prasad, R.: Effect of milling process parameters on the multiple performance characteristics. J. Ind. Mech. 3(2), 1–9 (2018)

35.

Maheswara Rao, Ch., Naga Raju, B.: Effect of WEDM process parameters on the multiple responses using VIKOR analysis. J. Recent Activities Prod. 3(2), 1–7 (2018)

36.

Maheswara Rao, Ch., Ashok Kumar, B.B.: Optimization of multiple responses in turning of AA7075 using taguchi’s quality loss method. J. Mechatron. Autom. 5(1), 31–37 (2018)

Title: Optimization of Turning Process Parameters Using PSI-Based Desirability-Grey Analysis
Authors: Ch. Maheswara Rao
P. Srinivasa Reddy
D. Suresh
R. Jagadeesh Kumar
Publisher: Springer Singapore
Book: Recent Advances in Material Sciences
Print ISBN: 978-981-13-7642-9

Electronic ISBN: 978-981-13-7643-6

Copyright Year: 2019
DOI: https://doi.org/10.1007/978-981-13-7643-6_19

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners