Top

Published in:

2019 | OriginalPaper | Chapter

Parametric Modeling of Transverse Layout for Machine Tool Gearboxes

Authors : Oleg Krol, Volodymyr Sokolov

Published in: Advances in Manufacturing II

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This article considers the problem of computer-aided design for transverse speed gearboxes layouts of drilling-milling-boring machines on the basis of parameterization methods and means. Models and algorithms of layouts parametric modeling are developed on the basis of maximum rigidity criteria and minimum reduced load on the supports of the spindle unit. A program for determining the optimal spatial position of the gearbox output shaft using the syntax of the CAD APM WinMachine is developed. In the process of constructing the optimal layout, the permissible variants of layouts are checked using the limitations on the minimum distances between the gear wheels and the box housing. A diagram for determining the position of the intermediate shaft and its effect on the level of output shaft loading is proposed. The analysis of the influence of the optimal spatial position of the shafts on the structure of the box housing is carried out. For this optimal version of the transverse layout, a 3D model of the metal-cutting machine gearbox on the basis of the machine SF68VF4 model is developed. The efficiency of using the parametrization apparatus in the problems of multivariate designing of machine tools is grounded.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Problems of Flaking in Strengthening Shaft Burnishing

next chapter Increasing of Lathe Equipment Efficiency by Application of Gang-Tool Holder

Taratynov, O., Averyanov, O., Klepikov, V.: Design and calculation of metal-cutting machine tools on a computer. MGIU, Moscow (2002). (in Russian)

Pronikov, A.: Design of metal-cutting machines and machine tools. Machinery Engineering, Moscow (1994). (in Russian)

Gurtyakov, A.: Metal-cutting machine tools. Calculation and design. Yurayt, Moscow (2017). (in Russian)

Bushuev, V.: Fundamentals of the design of machine tools. Stankin. Moscow (1992). (in Russian)

Avramova, T., Bushuev V., Gilovoy, L.: Metal-cutting machines. Machinary Engineering, Moscow (2012). (in Russian)

Tolstov, K.: Choice of machine tool constructions on the basis of an estimation of their compactness. Thesis Ph.D. Stankin, Moscow (1998). (in Russian)

Shevchenko, S., Mukhovaty, A., Krol, O.: Gear clutch with modified tooth profiles. Proc. Eng. 206, 979–984 (2017). https://doi.org/10.1016/j.proeng.2017.10.581CrossRef

Karpus, V.E., Ivanov, V.A.: Choise of optimal configuration of modular reusable fixtures. Russ. Eng. Res. 32(3), 213–219 (2012). https://doi.org/10.3103/S1068798X0812030124CrossRef

Karpus, V.E., Ivanov, V.A.: Locating accuracy of shafts in V-blocks. Russ. Eng. Res. 32(2), 144–150 (2012). https://doi.org/10.3103/S1068798X1202013XCrossRef

10.

Girschtick, J.: Introducing parametric modeling 2.0. Isicad, vol. 162, pp. 8–14 (2018)

11.

Ganin N.B., Design and strength calculation in the KOMPAS-3D. DMK, Moscow (2011). (in Russian)

12.

Fomin, E.P.: Using the parametric capabilities of KOMPAS-3D Journal CAD and graphics, vol. 10, pp. 70–74 (2007)

13.

Zamry, A.A.: Practical training course CAD/CAE APM WinMachine. Teaching-methodical manual. APM, Moscow (2007). (in Russian)

14.

Rosinsky, S., Shanin, D., Grigoriev, S.: Parametric capabilities of the graphic module of the APM graph for the APM WinMachine system. J. CAD Graph. 11, 37–40 (2001)

15.

Kamnev, A.: C3D labs represents the C3D Toolkit 2017. Topical technologies for developers of engineering software. Isicad, vol. 154, pp. 12–18 (2017)

16.

Kondrashova, S.G., Khamidulina, D.A., Lashkov, V.A.: Engineering design of mechanisms using the APM WinMachine system. Bulletin of Kazan Technological University, vol. 19, pp. 193–198 (2011). (in Russian)

17.

Eremin, A.V., Chekanin, A.V.: Calculation of the stiffness of the carrier system of the machine based on the superelement approach. Machine tools and instruments, vol. 6, pp. 12–16 (1991). (in Russian)

18.

Shevchenko, S., Mukhovaty, A., Krol, O.: Geometric aspects of modifications of tapered roller bearings. Proc. Eng. 150, 1107–1112 (2016). https://doi.org/10.1016/j.proeng.2016.07.221CrossRef

19.

Sokolov, V., Krol, O.: Installations criterion of deceleration device in volumetric hydraulic drive. Proc. Eng. 206, 936–943 (2017). https://doi.org/10.1016/j.proeng.2017.10.575CrossRef

20.

Krol, O., Sokolov, V.: Modelling of spindle nodes for machining centers. J. Phys. Conf. Ser. 1084, 012007 (2018). https://doi.org/10.1088/1742-6596/1084/1/012007CrossRef

21.

Shelofast, V.V., Chugunova, T.B.: Fundamentals of machine design. Examples of problem solving. APM, Moscow (2004). (in Russian)

22.

Pavlenko, I., Trojanowska, J., Gusak, O., et al.: Estimation of the reliability of automatic axial-balancing devices for multistage centrifugal pumps. Periodica Polytech. Mech. Eng. 63(1), 52–56 (2019). https://doi.org/10.3311/ppme.12801CrossRef

23.

Varela, M.L.R., Putnik, G.D., Manupati, V.K., et al.: Collaborative manufacturing based on cloud, and on other i4.0 oriented principles and technologies: a systematic literature review and reflections. Manag. Prod. Eng. Rev. 9(3), 90–99 https://doi.org/10.24425/119538

24.

Trojanowska, J., Kolinski, A., Galusik, D., et al.: A methodology of improvement of manufacturing productivity through increasing operational efficiency of the production process. In: Hamrol, A., Ciszak, O., Legutko, S., Jurczyk, M. (eds.) Advances in Manufacturing. Lecture Notes in Mechanical Engineering. Springer, Cham, pp. 23–32 (2018)

25.

Pavlenko, I., Trojanowska, J., Ivanov, V., Liaposhchenko, O.: Scientific and methodological approach for the identification of mathematical models of mechanical systems by using artificial neural networks. In: Machado, J., Soares, F., Veiga, G. (eds.) Innovation, Engineering and Entrepreneurship. HELIX 2018. Lecture Notes in Electrical Engineering, vol. 505, pp. 299–306 (2019). https://doi.org/10.1007/978-3-319-91334-6_41

26.

Krol, O., Sokolov, V.: Development of models and research into tooling for machining centers. East.-Eur. J. Enterp. Technol. 3(1(93)), 12–22 (2018). https://doi.org/10.15587/1729-4061.2018.131778CrossRef

Title: Parametric Modeling of Transverse Layout for Machine Tool Gearboxes
Authors: Oleg Krol
Volodymyr Sokolov
Publisher: Springer International Publishing
Book: Advances in Manufacturing II
Print ISBN: 978-3-030-16942-8

Electronic ISBN: 978-3-030-16943-5

Copyright Year: 2019
DOI: https://doi.org/10.1007/978-3-030-16943-5_11

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners