Top

Journal of Material Cycles and Waste Management

Published in:

16-01-2023 | ORIGINAL ARTICLE

Performance evaluation of concrete made with double-processed recycled aggregate (DPRA): mechanical grinding and silica fume impregnation technique

Authors: Ravindra Kumar Goliya, V. S. Babu

Published in: Journal of Material Cycles and Waste Management | Issue 2/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The depletion of natural aggregate sources has increased exponentially due to the enormous demand for concrete. Therefore, the recycled aggregate (RA) extracted from old concrete structures may reduce the demand for natural aggregate (NA). This paper introduced a new double processing technique that combines mechanical grinding in the Los Angeles Abrasion Machine (LAAM) followed by silica fume (SF) impregnation technique to produce high-quality double-processed recycled aggregate (DPRA). To examine the effect of DPRA, five different types of DPRAs [viz: DPRA (0RVS), DPRA (200RVS), DPRA (300RVS), DPRA (400), and DRA (500RVS)] were utilized to replace NA in an M30 grade control mix. In this investigation, different DPRAs were employed to replace NA in each concrete mix (e.g., 0%, 25%, 50%, 75%, and 100%). In addition, experiments were carried out to examine the workability, strength, and durability of concrete made with DPRAs. The compressive strength has decreased by 7.58% compared to the control mix at a 75% replacement level of NA. Similarly, the Rapid Chloride Penetration Test (RCPT) value within the lower permeability zone is up to a 75% replacement level of NA with DPRA (400RVS). Further mechanical crushing in an LAAM with 400 revolutions followed by SF impregnation of 10% concentration is the optimum processing to produce superior quality double-processed recycled aggregate (DPRA). Based on the experimental investigations, a 75% substitution level of DPRA (400RVS) in place of NA is finally suggested for structural concrete.

previous article A novel method for preparing phosphorus building gypsum (PBG)-based building materials with low water/gypsum ratios

next article Characterization of Cu2+ adsorption for eco-hydroxyapatite derived from limestone sludge via hydrothermal synthesis

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Neville AM (2011) Concrete technology, 2nd edn. Pearson education Asia, New delhi

Verian KP, Ashraf W, Cao Y (2018) Properties of recycled concrete aggregate and their influence in new concrete production. Resour Conserv Recycl 133:30–49. https://doi.org/10.1016/j.resconrec.2018.02.005CrossRef

Messari-Becker L, Mettke A, Knappe F, Storck U, Bollinger K, Grohmann M (2014) Recycling concrete in practice—a chance for sustainable resource management. Struct Concr 15:556–562. https://doi.org/10.1002/suco.201400010CrossRef

Singh M, Choudhary K, Srivastava A, Singh Sangwan K, Bhunia D (2017) A study on environmental and economic impacts of using waste marble powder in concrete. J Build Eng 13:87–95. https://doi.org/10.1016/j.jobe.2017.07.009CrossRef

Leite FDC, Motta RDS, Vasconcelos KL, Bernucci L (2011) Laboratory evaluation of recycled construction and demolition waste for pavements. Constr Build Mater 25:2972–2979. https://doi.org/10.1016/j.conbuildmat.2010.11.105CrossRef

Kisku N, Joshi H, Ansari M, Panda SK, Nayak S, Dutta SC (2017) A critical review and assessment for usage of recycled aggregate as sustainable construction material. Constr Build Mater 131:721–740. https://doi.org/10.1016/j.conbuildmat.2016.11.029CrossRef

Verma A, Babu VS, Arunachalam S (2021) Characterization of recycled aggregate by the combined method: acid soaking and mechanical grinding technique. Mater Today Proc. https://doi.org/10.1016/j.matpr.2021.01.842CrossRef

Chen W, Jin R, Xu Y, Wanatowski D, Li B, Yan L, Pan Z, Yang Y (2019) Adopting recycled aggregates as sustainable construction materials: a review of the scientific literature. Constr Build Mater 218:483–496. https://doi.org/10.1016/j.conbuildmat.2019.05.130CrossRef

Al-Bayati HKA, Das PK, Tighe SL, Baaj H (2016) Evaluation of various treatment methods for enhancing the physical and morphological properties of coarse recycled concrete aggregate. Constr Build Mater 112:284–298. https://doi.org/10.1016/j.conbuildmat.2016.02.176CrossRef

10.

Mehta PK, Meryman H (2009) Tools for reducing carbon emissions due to cement consumption. Struct Mag 11–15. http://www.structuremag.org/article.aspx?articleID=830. Accessed 24 May 2021

11.

Bostanci SC (2020) Use of waste marble dust and recycled glass for sustainable concrete production. J Clean Prod. https://doi.org/10.1016/j.jclepro.2019.119785CrossRef

12.

Fan Y, Xiao J, Tam VWY (2014) Effect of old attached mortar on the creep of recycled aggregate concrete. Struct Concr 15:169–178. https://doi.org/10.1002/suco.201300055CrossRef

13.

Shaikh FUA (2016) Effect of ultrafine fly ash on the properties of concretes containing construction and demolition wastes as coarse aggregates. Struct Concr 17:116–122. https://doi.org/10.1002/suco.201500030CrossRef

14.

Ccanz (2011) Best practice guide for the use of recycled aggregates in new concrete

15.

Nitesh KJNS, Rao SV, Kumar PR (2019) An experimental investigation on torsional behaviour of recycled aggregate based steel fiber reinforced self compacting concrete. J Build Eng 22:242–251. https://doi.org/10.1016/j.jobe.2018.12.011CrossRef

16.

Gao D, Zhang L (2018) Flexural performance and evaluation method of steel fiber reinforced recycled coarse aggregate concrete. Constr Build Mater 159:126–136. https://doi.org/10.1016/j.conbuildmat.2017.10.073CrossRef

17.

Shi C, Li Y, Zhang J, Li W, Chong L, Xie Z (2016) Performance enhancement of recycled concrete aggregate—a review. J Clean Prod 112:466–472. https://doi.org/10.1016/j.jclepro.2015.08.057CrossRef

18.

Ying J, Meng Q, Xiao J (2017) Effect of CO₂-modified recycled aggregate on compressive strength of concrete. Jianzhu Cailiao Xuebao/J Build Mater 20:277–282. https://doi.org/10.3969/j.issn.1007-9629.2017.02.021CrossRef

19.

Shima H, Tateyashiki H, Matsuhashi R, Yoshida Y (2005) An advanced concrete recycling technology and its applicability assessment through input-output analysis. J Adv Concr Technol 3:53–67. https://doi.org/10.3151/jact.3.53CrossRef

20.

Pawluczuk E, Kalinowska-Wichrowska K, Bołtryk M, Jiménez JR, Fernández JM (2019) The influence of heat and mechanical treatment of concrete rubble on the properties of recycled aggregate concrete. Materials (Basel). https://doi.org/10.3390/ma12030367CrossRef

21.

Katz A (2004) Treatments for the improvement of recycled aggregate. J Mater Civ Eng 16:597–603. https://doi.org/10.1061/(ASCE)0899-1561(2004)16:6(597)CrossRef

22.

Abbas A, Fathifazl G, Burkan Isgor O, Razaqpur AG, Fournier B, Foo S (2008) Proposed method for determining the residual mortar content of recycled concrete aggregates. J ASTM Int. https://doi.org/10.1520/JAI101087CrossRef

23.

Babu VS, Mullick AK, Jain KK, Singh PK (2014) Strength and durability characteristics of high-strength concrete with recycled aggregate-influence of processing. J Sustain Cem Mater 4:54–71. https://doi.org/10.1080/21650373.2014.976777CrossRef

24.

Dimitriou G, Savva P, Petrou MF (2018) Enhancing mechanical and durability properties of recycled aggregate concrete. Constr Build Mater 158:228–235. https://doi.org/10.1016/j.conbuildmat.2017.09.137CrossRef

25.

Spaeth V, Djerbi Tegguer A (2013) Improvement of recycled concrete aggregate properties by polymer treatments. Int J Sustain Built Environ 2:143–152. https://doi.org/10.1016/j.ijsbe.2014.03.003CrossRef

26.

Kazemian F, Rooholamini H, Hassani A (2019) Mechanical and fracture properties of concrete containing treated and untreated recycled concrete aggregates. Constr Build Mater 209:690–700. https://doi.org/10.1016/j.conbuildmat.2019.03.179CrossRef

27.

Ismail S, Ramli M (2014) Mechanical strength and drying shrinkage properties of concrete containing treated coarse recycled concrete aggregates. Constr Build Mater 68:726–739. https://doi.org/10.1016/j.conbuildmat.2014.06.058CrossRef

28.

Tam VWY, Tam CM, Le KN (2007) Removal of cement mortar remains from recycled aggregate using pre-soaking approaches. Resour Conserv Recycl 50:82–101. https://doi.org/10.1016/j.resconrec.2006.05.012CrossRef

29.

Verma A, Babu VS, Srinivasan A (2021) Strength and durability properties of treated recycled aggregate concrete by soaking and mechanical grinding method: influence of processing technique. J Mater Civ Eng 33:04021286. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003908CrossRef

30.

Zega CJ, Di Maio AA (2009) Recycled concrete made with different natural coarse aggregates exposed to high temperature. Constr Build Mater 23:2047–2052. https://doi.org/10.1016/j.conbuildmat.2008.08.017CrossRef

31.

Hanif A, Kim Y, Lu Z, Park C (2017) Early-age behavior of recycled aggregate concrete under steam curing regime. J Clean Prod 152:103–114. https://doi.org/10.1016/j.jclepro.2017.03.107CrossRef

32.

BIS (Bureau of Indian Standards, New Delhi): 1489(part-1)-1991. Indian standard portland-pozzolana cement specification part-1 fly ash based, third revision; 1991, (n.d.)

33.

BIS (Bureau of Indian Standards, New Delhi): 15388-2003. Indian standard specification for silica fume, (n.d.)

34.

BIS (Bureau of Indian Standards, New Delhi): 2386–1997. Indian standard methods of test for aggregates for concrete (Part-I to Part-VIII), Reaffirmed 1997, (n.d.)

35.

BIS (Bureau of Indian Standards, New Delhi): 383-2016. Indian standard specification for coarse and fine aggregates from natural sources for concrete, (n.d.)

36.

BIS (Bureau of Indian Standards, New Delhi): 456-2000. Indian standard plain and reinforced concrete-code of practice, fourth revision. (n.d.)

37.

BIS (Bureau of Indian Standards, New Delhi): 10262-2019. Indian standard specificat for concrete mix proportioning guidelines, second revision, (n.d.)

38.

BIS (Bureau of Indian Standards, New Delhi):1199-1999. Indian standard methods of sampling and analysis of concrete, Reaffirmed 1999, (n.d.)

39.

Babu VS, Mullick AK, Jain KK, Singh PK (2014) Mechanical properties of high strength concrete with recycled aggregate-influence of processing. Indian Concr J 88:10–26

40.

Silva RV, De Brito J, Dhir RK (2015) The influence of the use of recycled aggregates on the compressive strength of concrete: a review. Eur J Environ Civ Eng 19:825–849. https://doi.org/10.1080/19648189.2014.974831CrossRef

41.

Verma A, Babu VS, Arunachalam S (2022) Influence of acetic acid soaking and mechanical grinding treatment on the properties of treated recycled aggregate concrete. J Mater Cycles Waste Manag. https://doi.org/10.1007/s10163-022-01360-6CrossRef

42.

Berredjem L, Arabi N, Molez L (2020) Mechanical and durability properties of concrete based on recycled coarse and fine aggregates produced from demolished concrete. Constr Build Mater 246:118421. https://doi.org/10.1016/j.conbuildmat.2020.118421CrossRef

43.

Babu VS, Mullick AK, Jain KK, Singh PK (2014) Mechanical properties of high strength concrete with processed recycled aggregate—influence of mixing techniques. Indian Concr J 88:42–56

44.

Poon CS, Shui ZH, Lam L (2004) Effect of microstructure of ITZ on compressive strength of concrete prepared with recycled aggregates. Constr Build Mater 18:461–468. https://doi.org/10.1016/j.conbuildmat.2004.03.005CrossRef

45.

Verma A, Sarath Babu V, Arunachalam S (2021) Influence of mixing approaches on strength and durability properties of treated recycled aggregate concrete. Struct Concr 22:E121–E142. https://doi.org/10.1002/suco.202000221CrossRef

46.

Tam VWY, Gao XF, Tam CM (2005) Microstructural analysis of recycled aggregate concrete produced from two-stage mixing approach. Cem Concr Res 35:1195–1203. https://doi.org/10.1016/j.cemconres.2004.10.025CrossRef

47.

Limbachiya MC, Leelawat T, Dhir RK (2000) Use of recycled concrete aggregate in high-strength concrete. Mater Struct Constr 33:574–580. https://doi.org/10.1007/bf02480538CrossRef

48.

Chakradhara Rao M, Bhattacharyya SK, Barai SV (2011) Influence of field recycled coarse aggregate on properties of concrete. Mater Struct Constr 44:205–220. https://doi.org/10.1617/s11527-010-9620-xCrossRef

49.

Mukharjee BB, Barai SV (2017) Mechanical and microstructural characterization of recycled aggregate concrete containing silica nanoparticles. J Sustain Cem Mater 6:37–53. https://doi.org/10.1080/21650373.2016.1230899CrossRef

50.

Khoshkenari AG, Shafigh P, Moghimi M, Bin Mahmud H (2014) The role of 0–2mm fine recycled concrete aggregate on the compressive and splitting tensile strengths of recycled concrete aggregate concrete. Mater Des 64:345–354. https://doi.org/10.1016/j.matdes.2014.07.048CrossRef

51.

Kang M, Weibin L (2018) Effect of the aggregate size on strength properties of recycled aggregate concrete. Adv Mater Sci Eng. https://doi.org/10.1155/2018/2428576CrossRef

52.

Bai G, Zhu C, Liu C, Liu B (2020) An evaluation of the recycled aggregate characteristics and the recycled aggregate concrete mechanical properties. Constr Build Mater 240:117978. https://doi.org/10.1016/j.conbuildmat.2019.117978CrossRef

53.

Kou SC, Poon CS (2012) Enhancing the durability properties of concrete prepared with coarse recycled aggregate. Constr Build Mater 35:69–76. https://doi.org/10.1016/j.conbuildmat.2012.02.032CrossRef

54.

Erdoǧdu Ş (2005) Effect of retempering with superplasticizer admixtures on slump loss and compressive strength of concrete subjected to prolonged mixing. Cem Concr Res 35:907–912. https://doi.org/10.1016/j.cemconres.2004.08.020CrossRef

55.

Kou SC, Poon CS, Etxeberria M (2011) Influence of recycled aggregates on long term mechanical properties and pore size distribution of concrete. Cem Concr Compos 33:286–291. https://doi.org/10.1016/j.cemconcomp.2010.10.003CrossRef

56.

BIS (Bureau of Indian Standards, New Delhi): 1881-122:1983., Test. Concr. Method Determ. Water Absorption, London. (n.d.)

57.

Evangelista L, de Brito J (2010) Durability performance of concrete made with fine recycled concrete aggregates. Cem Concr Compos 32:9–14. https://doi.org/10.1016/j.cemconcomp.2009.09.005CrossRef

58.

Behera M, Bhattacharyya SK, Minocha AK, Deoliya R, Maiti S (2014) Recycled aggregate from C&D waste & its use in concrete—a breakthrough towards sustainability in construction sector: a review. Constr Build Mater 68:501–516. https://doi.org/10.1016/j.conbuildmat.2014.07.003CrossRef

59.

Mehdipour I, Razzaghi MS, Amini K, Shekarchi M (2013) Effect of mineral admixtures on fluidity and stability of self-consolidating mortar subjected to prolonged mixing time. Constr Build Mater 40:1029–1037. https://doi.org/10.1016/j.conbuildmat.2012.11.108CrossRef

60.

Shaikh FUA, Nguyen HL (2013) Properties of concrete containing recycled construction and demolition wastes as coarse aggregates. J Sustain Cem Mater 2:204–217. https://doi.org/10.1080/21650373.2013.833861CrossRef

61.

Xuan D, Zhan B, Poon CS (2017) Durability of recycled aggregate concrete prepared with carbonated recycled concrete aggregates. Cem Concr Compos 84:214–221. https://doi.org/10.1016/j.cemconcomp.2017.09.015CrossRef

62.

Sargam Y, Melugiri Shankaramurthy B, Wang K (2020) Characterization of RCAs and their concrete using simple test methods. J Sustain Cem Mater 9:61–77. https://doi.org/10.1080/21650373.2019.1692093CrossRef

63.

Ramirez-Meneses E, Dominguez-Crespo MA, Torres-Huerta AM (2012) Stabilized metal nanoparticles from organometallic precursors for low temperature fuel cells. Recent Pat Nanotechnol. https://doi.org/10.2174/187221013804484881CrossRef

64.

Ismail S, Ramli M (2013) Engineering properties of treated recycled concrete aggregate (RCA) for structural applications. Constr Build Mater 44:464–476. https://doi.org/10.1016/j.conbuildmat.2013.03.014CrossRef

65.

Tam VWY, Tam CM (2007) Assessment of durability of recycled aggregate concrete produced by two-stage mixing approach. J Mater Sci. https://doi.org/10.1007/s10853-006-0379-yCrossRef

66.

Li W, Xiao J, Sun Z, Kawashima S, Shah SP (2012) Interfacial transition zones in recycled aggregate concrete with different mixing approaches. Constr Build Mater 35:1045–1055. https://doi.org/10.1016/j.conbuildmat.2012.06.022CrossRef

67.

Sabir BB, Wild S, O’Farrell M (1998) A water sorptivity test for mortar and concrete. Mater Struct Constr 31:568–574. https://doi.org/10.1007/bf02481540CrossRef

68.

Nehdi M, Pardhan M, Koshowski S (2004) Durability of self-consolidating concrete incorporating high-volume replacement composite cements. Cem Concr Res 34:2103–2112. https://doi.org/10.1016/j.cemconres.2004.03.018CrossRef

69.

Pedro D, de Brito J, Evangelista L (2018) Durability performance of high-performance concrete made with recycled aggregates, fly ash and densified silica fume. Cem Concr Compos 93:63–74. https://doi.org/10.1016/j.cemconcomp.2018.07.002CrossRef

70.

Shaikh F, Chavda V, Minhaj N, Arel HS (2018) Effect of mixing methods of nano silica on properties of recycled aggregate concrete. Struct Concr 19:387–399. https://doi.org/10.1002/suco.201700091CrossRef

71.

Kannan S, Arunachalam K, Brindha D (2021) Performance analysis of recycled aggregate concrete with chemical admixture. Struct Concr 22:E8–E21. https://doi.org/10.1002/suco.201900380CrossRef

72.

Otsuki N, Miyazato S, Yodsudjai W (2003) Influence of recycled aggregate on interfacial transition zone, strength, chloride penetration and carbonation of concrete. J Mater Civ Eng 15:443–451. https://doi.org/10.1061/(asce)0899-1561(2003)15:5(443)CrossRef

73.

Tam VWY, Gao XF, Tam CM, Chan CH (2008) New approach in measuring water absorption of recycled aggregates. Constr Build Mater 22:364–369. https://doi.org/10.1016/j.conbuildmat.2006.08.009CrossRef

74.

Sasanipour H, Aslani F, Taherinezhad J (2019) Effect of silica fume on durability of self-compacting concrete made with waste recycled concrete aggregates. Constr Build Mater 227:116598. https://doi.org/10.1016/j.conbuildmat.2019.07.324CrossRef

75.

Kou SC, Zhan BJ, Poon CS (2012) Feasibility study of using recycled fresh concrete waste as coarse aggregates in concrete. Constr Build Mater 28:549–556. https://doi.org/10.1016/j.conbuildmat.2011.08.027CrossRef

76.

Tam VWY, Wang K, Tam CM (2008) Assessing relationships among properties of demolished concrete, recycled aggregate and recycled aggregate concrete using regression analysis. J Hazard Mater 152:703–714. https://doi.org/10.1016/j.jhazmat.2007.07.061CrossRef

77.

Limbachiya M, Meddah MS, Ouchagour Y (2012) Use of recycled concrete aggregate in fly-ash concrete. Constr Build Mater 27:439–449. https://doi.org/10.1016/j.conbuildmat.2011.07.023CrossRef

78.

Wang J, Zhang J, Cao D, Dang H, Ding B (2020) Comparison of recycled aggregate treatment methods on the performance for recycled concrete. Constr Build Mater 234:117366. https://doi.org/10.1016/j.conbuildmat.2019.117366CrossRef

79.

Guo Z, Chen C, Lehman DE, Xiao W, Zheng S, Fan B (2020) Mechanical and durability behaviours of concrete made with recycled coarse and fine aggregates. Eur J Environ Civ Eng 24:171–189. https://doi.org/10.1080/19648189.2017.1371083CrossRef

80.

Evangelista L, De Brito J (2014) Concrete with fine recycled aggregates: a review. Eur J Environ Civ Eng 18:129–172. https://doi.org/10.1080/19648189.2013.851038CrossRef

81.

Kou SC, Poon CS, Agrela F (2011) Comparisons of natural and recycled aggregate concretes prepared with the addition of different mineral admixtures. Cem Concr Compos 33:788–795. https://doi.org/10.1016/j.cemconcomp.2011.05.009CrossRef

82.

Kim JH, Sung JH, Jeon CS, Lee SH, Kim HS (2019) A study on the properties of recycled aggregate concrete and its production facilities. Appl Sci. https://doi.org/10.3390/app9091935CrossRef

83.

Zhang H, Wang Y, Lehman DE, Geng Y, Kuder K (2020) Time-dependent drying shrinkage model for concrete with coarse and fine recycled aggregate. Cem Concr Compos 105:103426. https://doi.org/10.1016/j.cemconcomp.2019.103426CrossRef

84.

de Brito J (2010) Abrasion resistance of concrete made with recycled aggregates. Int J Sustain Eng 3:58–64. https://doi.org/10.1080/19397030903254710CrossRef

85.

Tam VWY, Tam CM (2008) Diversifying two-stage mixing approach (TSMA) for recycled aggregate concrete: TSMAs and TSMAsc. Constr Build Mater 22:2068–2077. https://doi.org/10.1016/j.conbuildmat.2007.07.024CrossRef

86.

Xiao J, Li W, Sun Z, Lange DA, Shah SP (2013) Properties of interfacial transition zones in recycled aggregate concrete tested by nanoindentation. Cem Concr Compos 37:276–292. https://doi.org/10.1016/j.cemconcomp.2013.01.006CrossRef

87.

Leite MB, Monteiro PJM (2016) Microstructural analysis of recycled concrete using X-ray microtomography. Cem Concr Res 81:38–48. https://doi.org/10.1016/j.cemconres.2015.11.010CrossRef

88.

Said AM, Zeidan MS, Bassuoni MT, Tian Y (2012) Properties of concrete incorporating nano-silica. Constr Build Mater 36:838–844. https://doi.org/10.1016/j.conbuildmat.2012.06.044CrossRef

89.

Wang Q, Zhang Y, Fang Y, Zhang Y, Wu F (2020) Prediction of the mechanical behavior of recycled concrete with fresh concrete waste aggregate. Struct Concr 21:761–771. https://doi.org/10.1002/suco.201900115CrossRef

90.

Ann KY, Moon HY, Kim YB, Ryou J (2008) Durability of recycled aggregate concrete using pozzolanic materials. Waste Manag 28:993–999. https://doi.org/10.1016/j.wasman.2007.03.003CrossRef

91.

Pedro D, de Brito J, Evangelista L (2017) Evaluation of high-performance concrete with recycled aggregates: use of densified silica fume as cement replacement. Constr Build Mater 147:803–814. https://doi.org/10.1016/j.conbuildmat.2017.05.007CrossRef

Title: Performance evaluation of concrete made with double-processed recycled aggregate (DPRA): mechanical grinding and silica fume impregnation technique
Authors: Ravindra Kumar Goliya
V. S. Babu
Publication date: 16-01-2023
Publisher: Springer Japan
Published in: Journal of Material Cycles and Waste Management / Issue 2/2023
Print ISSN: 1438-4957
Electronic ISSN: 1611-8227
DOI: https://doi.org/10.1007/s10163-023-01592-0

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 2/2023

Ag recovery from waste printed circuit boards of cell phone for synthesis of Ag nanoparticles and their antibacterial activity

Solid waste recycling within higher education in developing countries: a case study of the University of Lagos

The feasibility study of stabilizing the automotive paint sludge by recycling, to produce green concrete blocks, considering environmental and mechanical factors

Addressing sustainability through waste management: a perspective from higher education institutions in Southeast Asia

Preparation of porous mullite ceramic supports from high alumina fly ash

Biological stability assessment of MSW organic fractions by means of respirometric and germination tests