Top

Wireless Personal Communications

Published in:

09-03-2018

Perturbation Sensitivity Analysis and Dynamic Topology Optimization for Heat Conduction Structure

Authors: Jiachun Li, Zhongfei Zou, Yuewei Chen

Published in: Wireless Personal Communications | Issue 1/2018

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Topology optimization is a fundamental problem for steady heat conduction. Due to the unidirectional treatment for the intermediate density elements in the traditional topology optimization, we propose a Bi-Directional Interpolation Model (BDIM) that intermediate density elements are judged by a threshold, and establish optimization model. Besides, considering the generation of new hole boundary in the process of heat conduction enhancement topology optimization, we study the perturbation sensitivity analysis with respect to new hole, and present an adaptive dynamic boundary method for the new boundary in the optimization process. Furthermore, based on the domain perturbation technique and Lebesgue differential theory, the topological derivative formulas with different objective functions subjected to three kinds of boundary conditions are derived for the control system of Poisson equation. Finally, a number of numerical examples are presented to demonstrate the feasibility and effectiveness of the proposed method for designing the heat conduction structure.

previous article Analytic Hierarchy Processes for Spectrum Sharing in 5G New Radio Standard

next article Trust Value Evolutionary Simulation Based a Whole-process and Multi-round Opinion Propagative Model

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Gao, X. J., & Ma, H. T. (2015). Topology optimization of continuum structures under buckling constraints. Computers & Structures, 157, 142–152.CrossRef

Ling, Z., Ronglu, X., & Yi, W. (2014). Topology optimization of constrained layer damping on plates using Method of Moving Asymptote (MMA) approach. Journal of Vibration and Shock, 33(8), 165–170.

Peng, Y., Liu, W. Y., Liu, B., Liu, J. Q., Huang, K. D., Wang, L., et al. (2015). The performance of the novel vapor chamber based on the leaf vein system. International Journal of Heat and Mass Conduction, 86, 656–666.CrossRef

Soprani, S., Haertel, J. H. K., Lazarov, B. S., Sigmund, O., & Engelbrecht, K. (2016). A design approach for integrating thermoelectric devices using topology optimization. Applied Energy, 176, 49–64.CrossRef

Chen, K., Wang, S. F., & Song, M. X. (2016). Optimization of heat source distribution for two-dimensional heat conduction using bionic method. International Journal of Heat and Mass Conduction, 93, 108–117.CrossRef

Bejan, A. (2000). From heat conduction principles to shape and structure in nature: Construct theory. International Journal of Heat and Mass Conduction, 122(3), 430–449.

Takezawa, A., Yoon, G. H., Jeong, S. H., Kobashi, M., & Kitamura, M. (2014). Structural topology optimization with strength and heat conduction constraints. Computer Methods in Applied Mechanics and Engineering, 276, 341–361.MathSciNetCrossRef

Park, C. W., & Yoo, Y. M. (1988). Shape design sensitivity analysis of a two-dimensional heat conduction system using the boundary element method. Computer & Structures, 28(4), 543–550.CrossRef

Saigal, S., & Chandra, A. (1991). Shape sensitivities and optimal configurations for heat diffusion problems: A BEM approach. Journal of Heat Conduction, 113, 287–295.CrossRef

10.

Hou, G. J. W., & Sheen, J. (1993). Numerical-methods for 2nd-order shape sensitivity analysis with applications to heat-conduction problems. International Journal for Numerical Methods in Engineering, 36(3), 417–435.CrossRef

11.

Zhuang, C. G., Xiong, Z. H., & Ding, H. (2010). Topology optimization of multi-material for the heat conduction problem based on the level set method. Engineering Optimization, 42(9), 811–831.MathSciNetCrossRef

12.

Zhuang, C. G., Xiong, Z. H., & Ding, H. (2007). A level set method for topology optimization of heat conduction problem under multiple load cases. Computer Methods in Applied Mechanics and Engineering, 196, 1074–1084.MathSciNetCrossRef

13.

Zuo, K. T., Chen, L. P., & Zhang, Y. Q. (2015). Structural optimal design of heat conductive body with topology optimization method. Journal of Mechanical Engineering, 41(4), 13–16.CrossRef

14.

Cheng, X. G., Li, Z. X., & Guo, Z. Y. (2004). Variational principles in heat conduction. Journal of Engineering Thermophysics, 25(03), 457–459.MathSciNet

15.

Cheng, X. G. (2004). Entranspy and its applications in heat conduction optimization, Ph.D. thesis, Tsinghua University, Beijing, China.

16.

Wu, J., Cheng, X. G., & Meng, J. A. (2006). Potential capacity dissipation extremum and entropy generation minimization in laminar convective heat conduction. Journal of Engineering Thermophysics, 27(1), 100–102.

17.

Gu, Y. X., Chen, B. S., Zhang, H. W., & Granghi, R. (2002). A sensitivity analysis method for linear and non-linear transient heat conduction with precise time integration. Structural and Multidisciplinary Optimization, 24(1), 23–37.CrossRef

18.

Gu, Y. X., Liu, T., & Kang, Z. (2004). Coupling sensitivity analysis and design optimization of thermo-structural transient responses. Acta Mechanica Sinica, 36(1), 37–42.

19.

Burger, F. H., Dirker, J., & Meyer, J. P. (2013). Three-dimensional conductive heat conduction topology optimisation in a cubic domain for the volume-to-surface problem. International Journal of Heat and Mass Conduction, 67, 214–224.CrossRef

20.

Li, Q., Steven, G. P., & Xie, Y. M. (2001). Thermoelastic topology optimization for problems with varying temperature fields. Journal of Thermal Stresses, 24(4), 347–366.CrossRef

21.

Li, Q., Steven, G. P., Querin, O. M., & Xie, Y. M. (2001). Structural topology design with multiple thermal criteria. Engineering Computations, 17, 715–734.CrossRef

22.

Li, Q., Steven, G. P., Xie, Y. M., & Querin, O. M. (2004). Evolutionary topology optimization for temperature reduction of heat conducting field. International Journal of Heat and Mass Conduction, 47(23), 5071–5083.CrossRef

23.

Xu, X. H., Liang, X. G., & Ren, J. X. (2007). Optimization of heat conduction using combinatorial optimization algorithms. International Journal of Heat and Mass Conduction, 50(9–10), 1675–1682.CrossRef

24.

Anflor, C. T. M., Albuquerque, E. L., & Wrobel, L. C. (2014). A topological optimization procedure applied to multiple region problems with embedded sources. International Journal of Heat and Mass Conduction, 78, 121–129.CrossRef

25.

Jing, G. X., Isakari, H., Matsumoto, T., Yamada, T., & Takahashi, T. (2015). Level set-based topology optimization for 2D heat conduction problems using BEM with objective function defined on design-dependent boundary with heat conduction boundary condition. Engineering Analysis with Boundary Elements, 61, 61–70.MathSciNetCrossRef

26.

Wang, M. Y., & Wang, X. M. (2005). A level-set based variational method for design and optimization of heterogeneous objects. Computer-Aided Design, 37(3), 321–337.CrossRef

27.

Li, J. C., & Zhang, P. (2012). Research on topology optimization based on interval sensitivity analysis method. China Mechanical Engineering, 23(14), 1659–1662.

28.

Li, J. C., Li, Y. G., & Han, J. J. (2016). Research on continuum structure topology optimization based on bi-directional interpolation model. Mechanical Science and Technology for Aerospace Engineering, 35(2), 222–226.

29.

Özdemir, İ. (2014). Topological derivative based optimization of 3D porous elastic microstructures. Computational Materials Science, 81, 319–325.CrossRef

30.

Giusti, S. M., & Novotny, A. A. (2012). Topological derivative for an anisotropic and heterogeneous heat diffusion problem. Mechanics Research Communications, 46, 26–33.CrossRef

31.

Abdelwahe, M., Hassine, M., & Masmoudi, M. (2009). Optimal shape design for fluid flow using topological perturbation technique. Journal of Mathematical Analysis and Application, 356(02), 548–563.MathSciNetCrossRef

32.

Garreau, S., Guillaume, P. H., & Masmoudi, M. (2001). The topological asymptotic for PDE systems: The elasticity case. SIAM Journal on Control and Optimization, 39, 1756–1778.MathSciNetCrossRef

33.

Bendsoe, M. P., & Sigraund, O. (2003). Topology optimization: Theory, methods and applications. Berlin, Heidelberg, New York: Springer.

34.

Zhou, Z. B. (2001). Minimum energy dissipation principle and its application. Beijing: Science Press.

Title: Perturbation Sensitivity Analysis and Dynamic Topology Optimization for Heat Conduction Structure
Authors: Jiachun Li
Zhongfei Zou
Yuewei Chen
Publication date: 09-03-2018
Publisher: Springer US
Published in: Wireless Personal Communications / Issue 1/2018
Print ISSN: 0929-6212
Electronic ISSN: 1572-834X
DOI: https://doi.org/10.1007/s11277-018-5468-0

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Other articles of this Issue 1/2018

Weighted Least Squares Support Vector Machine for Semi-supervised Classification

ALIC: A Low Overhead Compiler Optimization Prediction Model

Outlier Detection for Control Process Data Based on Improved ARHMM

Study on Replica Strategy Based on Access Pattern Mining in Smart City Cloud Storage System

Multi-Ontology Based Points of Interests (MO-POIS) and Parallel Fuzzy Clustering (PFC) Algorithm for Travel Sequence Recommendation with Mobile Communication on Big Social Media

The Impact of Automobile Recall on Consumers’ Purchase Decision Making Research