Top

Journal of Materials Engineering and Performance

Published in:

01-12-2015

Preparation, Characterization, and Millimeter Wave Attenuation of Carbon Fibers Coated with Ni-Cu-P and Ni-Co-P Alloys

Authors: Mingquan Ye, Zhitao Li, Chen Wang, Aijun Han

Published in: Journal of Materials Engineering and Performance | Issue 12/2015

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Composite carbon fibers (CFs) coated with Ni-X-P (X = Cu, Co, none) alloys were prepared by electroless plating. The morphology, crystal structure, elemental composition, and millimeter wave (MMW) attenuation performance of the alloy-coated CFs were characterized by scanning electron microscopy, x-ray diffractometry, energy-dispersive spectrometry, and microwave attenuation. CFs were coated with a layer of alloy particles. The P content in the Ni-Cu-P or Ni-Co-P-coated alloy was lower than that in the Ni-P alloy, and coating alloy Ni-P was amorphous. Coating alloys exhibited crystal characteristics after Cu or Co introduction. MMW-attenuation performance of alloy-coated CFs showed that the 3 and 8 mm wave-attenuation effects of CF/Ni-Cu-P and CF/Ni-Co-P were better than those of CF/Ni-P and CFs. The 8 mm wave-attenuation values and their increases were larger than those of the 3 mm wave. The MMW-attenuation performance is attributable to the alloy bulk resistivity and P content. The 3 mm wave-attenuation effects of wavelength-coated CF samples were slightly larger than those of the half wavelength samples. An optimal weight gain value existed for the MMW-attenuation performance of alloy-coated CFs.

previous article Processing and Optimization of Dissimilar Friction Stir Welding of AA 2219 and AA 7039 Alloys

next article Electroless Ni-P/SiC Nanocomposite Coatings With Small Amounts of SiC Nanoparticles for Superior Corrosion Resistance and Hardness

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

V.M. Petrov and V.V. Gagulin, Microwave Absorbing Materials, Inorg. Mater., 2001, 37, p 93–98CrossRef

D. Yan, S. Cheng, R.F. Zhuo et al., Nanoparticles and 3D Spongelike Porous Networks of Manganese Oxides And Their Microwave Absorption Properties, Nanotechnology, 2009, 20, p 105706–105711CrossRef

J.R. Liu, M. Itoh, T. Horikawa et al., Gigahertz Range Electromagnetic Wave Absorbers Made of Amorphous-Carbon Based Magnetic Nanocomposites, J. Appl. Phys., 2005, 98, p 054305-05–054305-07

K.Y. Park, S.E. Lee, C.G. Kim, and J.H. Han, Fabrication and Electromagnetic Characteristics of Electromagnetic Wave Absorbing Sandwich Structures, Compos. Sci. Technol., 2006, 66, p 576–584CrossRef

I. Choi, J.G. Kim, I.S. Seo, and D.G. Lee, Radar Absorbing Sandwich Construction Composed of CNT, PMI, Foam and Carbon/Epoxy Composite, Compos. Struct., 2012, 94, p 3002–3008CrossRef

P.C. Kim, D.G. Lee, and I.S. Seo, Low-Observable Radomes Composed of Composite Sandwich Constructions and Frequency Selective Surfaces, Compos. Sci. Technol., 2008, 68, p 2163–2170CrossRef

W. Li, L. Liu, C. Zhong et al., Effect of Carbon Fiber Surface Treatment on Cu Electrodeposition: The Electrochemical Behavior and the Morphology of Cu Deposits, J. Alloys. Compd., 2011, 509, p 3532–3536CrossRef

Y. Fan, H. Yang, X. Liu et al., Preparation and Study on Radar Absorbing Materials of Nickel-Coated Carbon Fiber and Flake Graphite, J. Alloys. Compd., 2008, 461, p 490–494CrossRef

X. Xu and S.G. Weber, Carbon Fiber/Epoxy Composite Ring-Disk Electrode: Fabrication, Characterization and Application to Electrochemical Detection in Capillary High Performance Liquid Chromatography, J. Electroanal. Chem., 2009, 630, p 75–80CrossRef

10.

B. Pierozynski and L. Smoczynski, Electrochemical Corrosion Behavior of Nickel-Coated Carbon Fiber Materials in Various Electrolytic Media, J. Electrochem. Soc., 2008, 155, p 427–436CrossRef

11.

J. Zeng and J. Xu, Microwave Absorption Properties of CuO/Co/Carbon Fiber Composites Synthesized by Thermal Oxidation, J. Alloys. Compd., 2010, 493, p 39–41CrossRef

12.

J. Zeng, J. Xu, and P. Tao, Ferromagnetic and Microwave Absorption Properties of Copper Oxide-Carbon Fiber Composites, J. Alloys. Compd., 2009, 487, p 304–308CrossRef

13.

A. Shah, Y. Wang, H. Huang et al., Microwave Absorption and Flexural Properties of Fe Nanoparticle/Carbon Fiber/Epoxy Resin Composite Plates, Compos. Struct., 2015, 131, p 1132–1141CrossRef

14.

X. Meng, Y. Wan, Q. Li et al., The Electrochemical Preparation and Microwave Absorption Properties of Magnetic Carbon Fibers Coated with Fe₃O₄ Films, Appl. Surf. Sci., 2011, 257, p 10808–10814CrossRef

15.

J. Chen, Principles of Radar Chaff Jamming, National Defence Industry, Beijing, 2007

16.

J.H. Byeon and J.W. Kim, Novel Electroless Copper Deposition on Carbon Fibers with Environmentally Friendly Processes, J. Colloid Interface Sci., 2010, 348, p 649–653CrossRef

17.

D.H. Che, G.C. Yao, and Z.K. Cao, A Precious Metal-Free Electroless Technique for the Deposition of Copper on Carbon Fibers, Metall. Mater. Trans. A, 2011, 43, p 4194–4199CrossRef

18.

K.Y. Park, J.H. Han, S.B. Lee et al., Microwave Absorbing Hybrid Composites Containing Ni-Fe Coated Carbon Nanofibers Prepared by Electroless Plating, Compos. Part A, 2011, 42, p 573–578CrossRef

19.

Z.S. Hua, Y.H. Liu, G.C. Yao et al., Preparation and Characterization of Nickel-Coated Carbon Fibers by Electroplating, J. Mater. Eng. Perform., 2011, 21, p 324–330CrossRef

20.

O.A. Gawad, M.H.A. Tabl, Z.A. Hamid et al., Electroplating of Chromium and Cr-Carbide Coating for Carbon Fiber, Surf. Coat. Technol., 2006, 201, p 1357–1362CrossRef

21.

S.J. Park and S.Y. Jin, HCl Removal Using Activated Carbon Fibers Electroplated with Silver, Carbon, 2004, 42, p 2113–2115CrossRef

22.

J. Zeng, H.Q. Fan, Y.L. Wang et al., Oxidized Electroplating Zinc-Covered Carbon Fibers as Microwave Absorption Materials, J. Alloy. Compd., 2012, 524, p 59–62CrossRef

23.

W.J. Xi, Z.M. Qiao, C.L. Zhu et al., The Preparation of Lotus-Like Super-Hydrophobic Copper Surfaces by Electroplating, Appl. Surf. Sci., 2009, 255, p 4836–4839CrossRef

24.

X.Q. Xu, L.Q. Zhu, W.P. Li et al., A Variable Hydrophobic Surface Improves Corrosion Resistance of Electroplating Copper Coating, Appl. Surf. Sci., 2011, 257, p 5524–5528CrossRef

25.

C.A. Taylor and W.K.S. Chiu, Characterization of CVD Carbon Films for Hermetic Optical Fiber Coatings, Surf. Coat. Technol., 2003, 168, p 1–11CrossRef

26.

N.I. Baklanova, T.M. Zima, A.I. Boronin et al., Protective Ceramic Multilayer Coatings for Carbon Fibers, Surf. Coat. Technol., 2006, 201, p 2313–2319CrossRef

27.

H.C. Wen, K.Y. Yang, K.L. Ou et al., Effects of Ammonia Plasma Treatment on the Surface Characteristics of Carbon Fibers, Surf. Coat. Technol., 2006, 200, p 3166–3169CrossRef

28.

G. Hackl, H. Gerhard, and N. Popovska, Coating of Carbon Short Fibers with Thin Ceramic Layers by Chemical Vapor Deposition, Thin Solid Films, 2006, 513, p 217–222CrossRef

29.

L. Croin, E. Vittone, and G. Amato, In Situ Control of Dewetting of Cu Thin Films in Graphene Chemical Vapor Deposition, Thin Solid Films, 2014, 573, p 122–127CrossRef

30.

X.L. Shi, Z.W. Zhu, M. Wang et al., Fabrication and Properties of W-20Cu Alloy Reinforced by Titanium Coated Carbon Fibers, Mater. Sci. Eng. A, 2011, 528, p 8353–8358CrossRef

31.

A. Proudnik, Y. Zamastotsky, V. Siarheyev et al., Electromagnetic Interference Shielding Properties of the Cu, Ti, Cr Coatings Deposited by Arc-PVD on Textile Materials, Electro. Rev., 2012, 88, p 81–83

32.

F.Y. Zhang, D.G. He, S.T. Ge et al., Effect of Fiber Splitting on the Catalytic Graphitization of Electroless Ni-B-Coated Polyacrylonitrile-Based Carbon Fibers, Surf. Coat. Technol., 2008, 203, p 99–103CrossRef

33.

K.Y. Park, J.H. Han, S.B. Lee, J.W. Yi et al., Microwave Absorbing Hybrid Composites Containing Ni-Fe Coated Carbon Nanofibers Prepared by Electroless Plating, Compos. Part A, 2011, 42, p 573–578CrossRef

34.

L.Z. Di, B. Liu, J. Song et al., Effect of Chemical Etching on the Cu/Ni Metallization of Poly (ether ether ketone)/Carbon Fiber Composites, Appl. Surf. Sci., 2011, 257, p 4272–4277CrossRef

35.

L.M. Yuan, J. Cai, W.Q. Zhang et al., Fabrication of Porous Flaky Electromagnetic Particles by Electroless Plating of CoNiP on Diatomite, Appl. Surf. Sci., 2012, 258, p 9680–9684CrossRef

36.

J. Cai, M.M. Lan, D.Y. Zhang et al., Electrical Resistivity and Dielectric Properties of Helical Microorganism Cells Coated with Silver by Electroless Plating, Appl. Surf. Sci., 2012, 258, p 8769–8774CrossRef

Title: Preparation, Characterization, and Millimeter Wave Attenuation of Carbon Fibers Coated with Ni-Cu-P and Ni-Co-P Alloys
Authors: Mingquan Ye
Zhitao Li
Chen Wang
Aijun Han
Publication date: 01-12-2015
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 12/2015
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-015-1802-9

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 12/2015

Corrosion Investigations of Black Chromite Films on Zn and Zn-Co Coatings with Low Cobalt Content

Corrosion Behavior of Sintered NdFeB Magnets Coated with Ni Coatings Deposited by Ion Beam Sputtering

Effects of V Addition on Microstructure and Hardness of Fe-C-B-Ni-V Hardfacing Alloys Cast on Steel Substrates

Comparing Rotary Bend Wire Fatigue Test Methods at Different Test Speeds

The Effect of Processing Parameters on the Performance of Spark Plasma Sintered cBN-WC-Co Composites

Mechanical Behavior of a NiTi Endodontic File During Insertion in an Anatomic Root Canal Using Numerical Simulations

Premium Partners