Top

Published in:

27-07-2023 | Original Article

Process optimization study on the feedstock derived from Cerbera odollam seeds

Authors: Chidambaranathan Bibin, Raghavan Sheeja, Yuvarajan Devarajan, T. Raja, Ismail Hossain, Mohamed Ouladsmane, M. A. Kalam

Published in: Biomass Conversion and Biorefinery | Issue 17/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Biodiesel, made from inedible oils, presents an intriguing eco-friendly option for diesel engines due to its comparable qualities with traditional diesel fuel, requiring no engine modifications. This work explores the possibility of using Cerbera odollam (sea mango) oil as a biodiesel feedstock. Cerbera odollam oil is readily available in many forested areas worldwide. However, before alkaline catalytic esterification, the FFA in the oil needs to be transformed into esters through catalytic acid esterification. Optimization of reaction parameters for biodiesel production, such as reaction time (2 h), reaction temperature (55 °C), catalyst concentration (1.2 wt%), and the molar ratio (5.5:1), has been tuned. The parameters of the biodiesel produced were comparable to typical biodiesel standards. The optimized reaction parameters significantly influenced the biodiesel yield and quality. Under optimal conditions, 94.5% of Cerbera odollam oil is converted into biodiesel. Non-edible oil from Cerbera odollam has likely to be a feasible substitute for diesel fuel in the form of biodiesel.

previous article Boosting protein yield from mustard (Brassica juncea) meal via microwave-assisted extraction and advanced optimization methods

next article Effects of hot air temperature on moisture reduction and drying time of turmeric in a closed-system herb dryer: kinetics and models

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Bibin C, Sheeja R, Devarajan Y, Madhu S, Ponnappan VS, Natrayan L (2023) Environment impact assessment of agricultural diesel engines utilising biodiesel derived from phoenix sylvestris oil. Environ Res:115432. https://doi.org/10.1016/j.envres.2023.115432

Al-Mawali KS, Osman AI, Al-Muhtaseb AH, Mehta N, Jamil F, Mjalli F, Vakili-Nezhaad GR, Rooney DW (2021) Life cycle assessment of biodiesel production utilising waste date seed oil and a novel magnetic catalyst: a circular bioeconomy approach. Renew Energy 170:832–846. https://doi.org/10.1016/j.renene.2021.02.027CrossRef

Al-Muhtaseb AH, Jamil F, Osman AI, Tay Zar Myint M, Htet Kyaw H, Al-Hajri R, Hussain M, Ahmad MN, Naushad M (2022) State-of-the-art novel catalyst synthesised from waste glassware and eggshells for cleaner fuel production. Fuel 330:125526. https://doi.org/10.1016/j.fuel.2022.125526CrossRef

Duraisamy P et al (2023) Performance and emissions characteristics of a common rail direct injection diesel engine powered by ignition enhancer-biodiesel blends. Int J Environ Sci Technol. https://doi.org/10.1007/s13762-023-04891-z

Al-Muhtaseb AH, Osman AI, Murphin Kumar PS, Jamil F, Al-Haj L, Al Nabhani A, Kyaw HH, Myint MTZ, Mehta N, Rooney DW (2021) Circular economy approach of enhanced bifunctional catalytic system of CaO/CeO2 for biodiesel production from waste loquat seed oil with life cycle assessment study. Energy Convers Manag 236:114040. https://doi.org/10.1016/j.enconman.2021.114040CrossRef

Arumugam A, Ponnusami V (2019) Biodiesel production from Calophyllum inophyllum oil a potential non-edible feedstock: an overview. Renew Energy 131:459–471. https://doi.org/10.1016/j.renene.2018.07.059CrossRef

Subramanian B et al (2022) Detailed analysis on engine operating in dual fuel mode with different energy fractions of sustainable HHO gas. Environ Prog Sustain Energy. https://doi.org/10.1002/ep.13850

Vijayaragavan M et al (2021) Effect of induction on exhaust gas recirculation and hydrogen gas in compression ignition engine with simarouba oil in dual fuel mode. Int J Hydrog Energy. https://doi.org/10.1016/j.ijhydene.2021.11.201

Atabani AE, Silitonga AS, Badruddin IA, Mahlia TMI, Masjuki HH, Mekhilef S (2012) A comprehensive review on biodiesel as an alternative energy resource and its characteristics. Renew Sustain Energy Rev 16:2070–2093. https://doi.org/10.1016/j.rser.2012.01.003CrossRef

10.

Bai L, Tajikfar A, Tamjidi S, Foroutan R, Esmaeili H (2021) Synthesis of MnFe2O4@graphene oxide catalyst for biodiesel production from waste edible oil. Renew Energy 170:426–437. https://doi.org/10.1016/j.renene.2021.01.139CrossRef

11.

Krishnan MG et al (2023) Exploring the synergistic potential of higher alcohols and biodiesel in blended and dual fuel combustion modes in diesel engines: a comprehensive review. Sustain Chem Pharm 35:101180. https://doi.org/10.1016/j.scp.2023.101180

12.

Bibin C, Seeni Kannan P, Devan P (2020) Performance, emission and combustion characteristics of a DI diesel engine using blends of Cerbera odollam oil biodiesel and diesel as fuel. Therm Sci 24:13–25CrossRef

13.

Chidambaranathan B, Kumarasami DP, Soundararajan G, Thulasiram R (2022a) Performance and environmental impact assessment of diesel engine operating on high viscous Cerbera odollam oil–diesel blends. Environ Sci Pollut Res. https://doi.org/10.1007/s11356-022-20211-3

14.

Chidambaranathan B, Ponnusamy D, Sheeja K, Madhu R (2022b) Thermal and chemical exhaust gas recirculation potential of Cerbera odollam oil biodiesel - fuelled diesel engine for environmental sustainability. Environ Sci Pollut Res. https://doi.org/10.1007/s11356-022-20463-z

15.

Lionus Leo GM et al (2023) Optimisation and environmental analysis of waste cashew nut shell oil biodiesel/cerium oxide nanoparticles blends and acetylene fumigation in agricultural diesel engine. Sustainable Energy Technol Assess 58:103375. https://doi.org/10.1016/j.seta.2023.103375

16.

Deka TJ, Osman AI, Baruah DC, Rooney DW (2022) Methanol fuel production, utilisation, and techno-economy: a review. Environ Chem Lett. https://doi.org/10.1007/s10311-022-01485-y

17.

Dey S, Reang NM, Das PK, Deb M (2021) A comprehensive study on prospects of economy, environment, and efficiency of palm oil biodiesel as a renewable fuel. J Clean Prod 286:124981. https://doi.org/10.1016/j.jclepro.2020.124981CrossRef

18.

Ewunie GA, Lekang OI, Morken J, Yigezu ZD (2021) Characterising the potential and suitability of Ethiopian variety Jatropha curcas for biodiesel production: variation in yield and physicochemical properties of oil across different growing areas. Energy Reports 7:439–452. https://doi.org/10.1016/j.egyr.2021.01.007CrossRef

19.

Loyte A et al (2023) Novel approach for efficient operation and reduced harmful emissions on a dual-fuel research engine propelled with hydrogen-enriched natural gas and diesel. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 45(3):8218–8238. https://doi.org/10.1080/15567036.2023.2224737

20.

Loyte A et al (2023) Influence of injection strategies on ignition patterns of RCCI combustion engine fuelled with hydrogen enriched natural gas. Environ Res 234:116537. https://doi.org/10.1016/j.envres.2023.116537

21.

Gopinath S, Devan PK, Pitchandi K (2020) Production of pyrolytic oil from ULDP plastics using silica-alumina catalyst and used as fuel for DI diesel engine. RSC Adv 10:37266–37279. https://doi.org/10.1039/D0RA07073DCrossRef

22.

Hathurusingha S (2011) Periodic variation in kernel oil content and fatty acid profiles of Calophyllum inophyllum L.: a medicinal plant in northern Australia. Ind Crops Prod 33:775–778. https://doi.org/10.1016/j.indcrop.2011.01.022CrossRef

23.

Hazar H, Sevinc H (2019) Investigation of the effects of preheated linseed oil on performance and exhaust emission at a coated diesel engine. Renew Energy 130:961–967. https://doi.org/10.1016/j.renene.2018.07.003CrossRef

24.

Hoang AT (2021) Combustion behavior, performance and emission characteristics of diesel engine fuelled with biodiesel containing cerium oxide nanoparticles: a review. Fuel Process Technol 218:106840. https://doi.org/10.1016/j.fuproc.2021.106840CrossRef

25.

Vellaiyan S et al (2023) Optimisation of fuel modification parameters for efficient and greener energy from diesel engine powered by water-emulsified biodiesel with cetane improver. Case Studies in Thermal Engineering 48:103129. https://doi.org/10.1016/j.csite.2023.103129

26.

Jaisankar S, Radhakrishnan TK, Sheeba KN, Suresh S (2009) Experimental investigation of heat transfer and friction factor characteristics of thermosyphon solar water heater system fitted with spacer at the trailing edge of Left-Right twisted tapes. Energy Convers Manag 50:2638–2649. https://doi.org/10.1016/j.enconman.2009.06.019CrossRef

27.

Vellaiyan S et al (2022) Water in waste-derived oil emulsion fuel with cetane improver: formulation, characterization and its optimization for efficient and cleaner production. Fuel Process Technol 228:107141. https://doi.org/10.1016/j.fuproc.2021.107141

28.

Joshi SM, Gogate PR, Suresh Kumar S (2018) Intensification of esterification of karanja oil for production of biodiesel using ultrasound assisted approach with optimisation using response surface methodology. Chem Eng Process - Process Intensif 124:186–198. https://doi.org/10.1016/j.cep.2017.12.010CrossRef

29.

Kothandan A, Masimalai S (2018) Cleaner emissions from a DI-diesel engine fueled with mahua oil and low carbon ethanol-hydrogen in dual fuel mode. Environ Sci Pollut Res 25:32684–32693. https://doi.org/10.1007/s11356-018-3166-9CrossRef

30.

Kumar RS, Sivakumar S, Joshuva A, Deenadayalan G, Vishnuvardhan R (2021) Bio-fuel production from Martynia annua L. seeds using slow pyrolysis reactor and its effects on diesel engine performance, combustion and emission characteristics. Energy 217:119327. https://doi.org/10.1016/j.energy.2020.119327CrossRef

31.

Subramanian K et al (2023) Effect of pilot fuel injection strategies and EGR on a CRDI diesel engine powered by simmondsia chinensis seed biodiesel-methyl acetate blend. Sustain Energy Technol Assess 58:103345. https://doi.org/10.1016/j.seta.2023.103345

32.

Mansour HMM, El-Sohaimy SA, Zeitoun AM, Abdo EM (2022) Effect of natural antioxidants from fruit leaves on the oxidative stability of soybean oil during accelerated storage. Antioxidants 11(9):1691. https://doi.org/10.3390/antiox110916912CrossRef

33.

Maqsood K, Alsaady M (2022) Optimisation using response surface methodology for producing biodiesel from waste cooking oil using fishbone catalyst. Materialwissenschaft Und Werkstofftechnik 53(10):1242–1248. Portico. https://doi.org/10.1002/mawe.202200138CrossRef

34.

Mishra S, Bukkarapu KR, Krishnasamy A (2021) A composition based approach to predict density, viscosity and surface tension of biodiesel fuels. Fuel 285:119056. https://doi.org/10.1016/j.fuel.2020.119056CrossRef

35.

Devan PK et al (2020) Improving the characteristics of engine oil using nanofluid as coolant in combat vehicles. Materials Today: Proceedings 22:1130–1134. https://doi.org/10.1016/j.matpr.2019.12.005

36.

Osman AI, Abu-Dahrieh JK, Abdelkader A, Hassan NM, Laffir F, McLaren M, Rooney D (2017) Silver-modified η-Al2O3 catalyst for DME production. J Phys Chem C 121:25018–25032. https://doi.org/10.1021/acs.jpcc.7b04697CrossRef

Title: Process optimization study on the feedstock derived from Cerbera odollam seeds
Authors: Chidambaranathan Bibin
Raghavan Sheeja
Yuvarajan Devarajan
T. Raja
Ismail Hossain
Mohamed Ouladsmane
M. A. Kalam
Publication date: 27-07-2023
Publisher: Springer Berlin Heidelberg
Published in: Biomass Conversion and Biorefinery / Issue 17/2023
Print ISSN: 2190-6815
Electronic ISSN: 2190-6823
DOI: https://doi.org/10.1007/s13399-023-04657-0

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 17/2023

Correction to: Experimental investigation of biopolymer efficiency of double selective strain for oil extraction from petroleum reservoirs using microdeletion injection

Water purification using activated carbon prepared from agriculture waste — overview of a recent development

Techno-economic analysis of methanol synthesis from syngas derived from steam reforming of crude glycerol

Biosynthesis of silver nanoparticles from novel Bischofia javanica plant loaded chitosan hydrogel: as antimicrobial and wound healing agent

Correction to: Chemical conversion of furan dicarboxylic acid to environmentally benign polyesters: an overview

Thermogravimetric characteristics and kinetic modeling of Piptocoma discolor pyrolysis and combustion processes to contribute to its use as a renewable energy source in the Ecuadorian Amazon region