Top

Published in:

2022 | OriginalPaper | Chapter

Properties of Gypsum Mortars Dosed with LFS for Use in the Design of Prefabricated Blocks

Authors : Isabel Santamaría-Vicario, Álvaro Alonso-Díez, Mathieu Horgnies, Ángel Rodríguez-Saiz

Published in: New Technologies in Building and Construction

Publisher: Springer Nature Singapore

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The aim of the present investigation is to determine the suitability of gypsum mortars with mineral additions of ladle furnace slags (LFS) for use in the manufacture of prefabricated blocks. Different dosages of gypsum mortars are designed, and the corresponding tests for their characterization are performed, with the objective of determining their properties, in both the fresh and the hardened state, in accordance with applicable standards. A suitable dosage is then chosen, bearing in mind the optimization criterion on the use of waste in gypsum mixtures, seeking a balance between the quantity of slag that is used and the quality of its properties. Completing the study, a series of complementary tests are performed related to its behaviour in the presence of heat, fire, and both thermal and acoustic transmission. The results showed that the gypsum mortar designs presented similar properties to the conventional mortars and can be approved for use in construction, either as gypsum mortars or as raw material for the manufacture of prefabricated blocks, in compliance with the requirements established in current European standards.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Integrating Artificial Intelligence Approaches for Quantitative and Qualitative Analysis in H-BIM

next chapter Lightweight Recycled Polyurethane Mortar Placement: A Case of Success

Li X (2020) An urgent call for building green civilization: the natural environment is rapidly deteriorating. In: Green Civilization. Springer, Singapore. https://doi.org/10.1007/978-981-15-7812-0_1

Ehrlich PR, Ehrlich AH (2013) Can a collapse of global civilization be avoided? Proc Royal Soc B: Biol Sci 280(1754):20122845. https://doi.org/10.1098/rspb.2012.2845CrossRef

Appannagari RR (2017) Environmental pollution causes and consequences: a study. North Asian Int Res J Soc Sci Humanities 3(8):151–161

Tainter JA (2008) Collapse, sustainability, and the environment: how authors choose to fail or succeed. Rev Anthropol 37(4):342–371. https://doi.org/10.1080/00938150802398677CrossRef

Brown LR (2013) Eco-economy: building an economy for the earth. Routledge. https://doi.org/10.4324/9781315071893

Chen Z (2020) Work together to create a better future for the world’s ecological civilization. Chin J Urban Environ Stud 8(02):2075001. https://doi.org/10.1142/S2345748120750019CrossRef

Ursul A, Ursul T (2018) Environmental education for sustainable development. Future Human Image 9(1):116. https://doi.org/10.29202/fhi/9/12

Basu S, Roy M, Pal P (2019) Corporate greening in a large developing economy: pollution prevention strategies. Environ Dev Sustain 21(4):1603–1633. https://doi.org/10.1007/s10668-018-0121-3CrossRef

Majeed A, Wang L, Zhang X, Kirikkaleli D (2021) Modeling the dynamic links among natural resources, economic globalization, disaggregated energy consumption, and environmental quality: fresh evidence from GCC economies. Resour Policy 73:102204. https://doi.org/10.1016/j.resourpol.2021.102204CrossRef

10.

Puskás A, Corbu O, Szilágyi H, Moga LM (2014) Construction waste disposal practices: the recycling and recovery of waste. WIT Trans Ecol Environ 191:1313–1321. https://doi.org/10.2495/SC141102CrossRef

11.

Sáez PV, Osmani M (2019) A diagnosis of construction and demolition waste generation and recovery practice in the European Union. J Clean Prod 241:118400. https://doi.org/10.1016/j.jclepro.2019.118400CrossRef

12.

Pacheco-Torgal F (2014) Introduction to the environmental impact of construction and building materials. In: Eco-efficient construction and building materials. Woodhead Publishing, pp 1–10

13.

Weglarz A, Gilewski P (2019) Innovative technologies in construction sector that meet criteria of sustainable development. In: IOP conference series: materials science and engineering, vol 661, no 1, IOP Publishing, p 012058. https://doi.org/10.1088/1757-899X/661/1/012058

14.

Rakhova M, Nikonorova S (2018) Problems of implementing innovative solutions in the construction sector of economy organizations. In: MATEC web of conferences, vol 251. EDP Sciences, p 05013. https://doi.org/10.1051/matecconf/201825105013

15.

Coelho A, De Brito J (2012) Influence of construction and demolition waste management on the environmental impact of buildings. Waste Manage 32(3):532–541. https://doi.org/10.1016/j.wasman.2011.11.011CrossRef

16.

Ding Z, Wang Y, Zou PX (2016) An agent based environmental impact assessment of building demolition waste management: conventional versus green management. J Clean Prod 133:1136–1153. https://doi.org/10.1016/j.jclepro.2016.06.054CrossRef

17.

Lawrence M (2015) Reducing the environmental impact of construction by using renewable materials. J Renew Materials 3(3):163–174. https://doi.org/10.7569/JRM.2015.634105CrossRef

18.

Huang B, Gao X, Xu X, Song J, Geng Y, Sarkis J, Nakatani J (2020) A life cycle thinking framework to mitigate the environmental impact of building materials. One Earth 3(5):564–573. https://doi.org/10.1016/j.oneear.2020.10.010CrossRef

19.

Costa C, Monteiro M, Rangel B, Alves FJL (2017) Industrial and natural waste transformed into raw material. Proc Inst Mech Eng, Part L: J Mater: Des Appl 231(1–2):247–256. https://doi.org/10.1590/1980-5373-MR-2020-0043CrossRef

20.

Sassanelli C, Rosa P, Rocca R, Terzi S (2019) Circular economy performance assessment methods: a systematic literature review. J Clean Prod 229:440–453. https://doi.org/10.1016/j.jclepro.2019.05.019CrossRef

21.

Oge M, Ozkan D, Celik MB, Gok MS, Karaoglanli AC (2019) An overview of utilization of blast furnace and steelmaking slag in various applications. Mater Today: Proc 11:516–525. https://doi.org/10.1016/j.matpr.2019.01.023CrossRef

22.

Zhang X, Chen J, Jiang J, Li J, Tyagi RD, Surampalli RY (2020) The potential utilization of slag generated from iron-and steelmaking industries: a review. Environ Geochem Health 42(5):1321–1334. https://doi.org/10.1007/s10653-019-00419-yCrossRef

23.

Thomas C, Rosales J, Polanco JA, Agrela F (2019) Steel slags. In: New trends in eco-efficient and recycled concrete. Woodhead Publishing, pp 169–190. https://doi.org/10.1016/B978-0-08-102480-5.00007-5

24.

Santamaría-Vicario I, Rodríguez A, Gutiérrez-González S, Calderón V (2015) Design of masonry mortars fabricated concurrently with different steel slag aggregates. Constr Build Mater 95:197–206. https://doi.org/10.1016/j.conbuildmat.2015.07.164CrossRef

25.

Santamaría-Vicario I, Rodríguez A, Junco C, Gutiérrez-González S, Calderón V (2016) Durability behavior of steelmaking slag masonry mortars. Mater Des 97:307–315. https://doi.org/10.1016/j.matdes.2016.02.080CrossRef

26.

Alonso A, Rodríguez A, Gadea J, Gutiérrez-González S, Calderón V (2019) Impact of plasterboard with ladle furnace slag on fire reaction and thermal behavior. Fire Technol 55(5):1733–1751. https://doi.org/10.1007/s10694-019-00828-6CrossRef

27.

Rodríguez A, Gutiérrez-González S, Horgnies M, Calderón V (2013) Design and properties of plaster mortars manufactured with ladle furnace slag. Mater Des 1980–2015(52):987–994. https://doi.org/10.1016/j.matdes.2013.06.041CrossRef

28.

Yang F (2015) Contemporary construction of ecological civilization: from ecological crisis to ecological governance. Chin J Urban Environ Stud 3(04):1550030. https://doi.org/10.1142/S234574811550030XCrossRef

29.

Zhu T, Gao S (2014) Promoting circular development and recycling solid waste-In the view of ecological civilization construction. In: Advanced materials research, vol 878. Trans Tech Publications Ltd, pp 873–878. https://doi.org/10.4028/www.scientific.net/AMR.878.873

30.

Ghaffar SH, Burman M, Braimah N (2020) Pathways to circular construction: an integrated management of construction and demolition waste for resource recovery. J Clean Prod 244:118710. https://doi.org/10.1016/j.jclepro.2019.118710CrossRef

31.

EN 13279-1: 2009 Gypsum Binders and Gypsum Plasters—Part 1: definitions and requirements. European Committee for Standardization Brussels, Belgium

32.

EN 13279-2:2014. Gypsum binders and gypsum plasters—Part 2: test methods. European Committee for Standardization, Brussels, Belgium

33.

UNE 102042: 2014 Gypsum plasters. Other test methods. Asociación Española de Normalización y Certificación, Madrid, España

34.

EN 1015-19:1999 Methods of test for mortar for masonry—Part 19: determination of water vapour permeability of hardened rendering and plastering mortars. European Committee for Standardization, Brussels, Belgium

35.

EN 1015-18:2003 Methods of test for mortar for masonry—Part 18: determination of water absorption coefficient due to capillary action of hardened mortar. European Committee for Standardization, Brussels, Belgium

36.

EN ISO 1182:2011 Reaction to fire tests for products—Non-combustibility test. European Committee for Standardization, Brussels, Belgium

37.

EN ISO 10534-2:2002 Acoustics—determination of sound absorption coefficient and impedance in impedances tubes—Part 2: transfer-function method. European Committee for Standardization, Brussels, Belgium

38.

ASTM 1114-06 2019 Standard test method for steady-state thermal transmission properties by means of the thin-heater apparatus. American Society for Testing and Materials. Pennsylvania, USA

39.

EN 772-1:2011+A1 Methods of test for masonry units—Part 1: determination of compressive strength. European Committee for Standardization, Brussels, Belgium

40.

Ghazi K, Hugi E, Wullschleger L, Frank TH (2007) Gypsum board in fire-modeling and experimental validation. J Fire Sci 25(3):267–282. https://doi.org/10.1177/0734904107072883CrossRef

41.

Yu QL, Brouwers HJ (2012) Thermal properties and microstructure of gypsum board and its dehydration products: a theoretical and experimental investigation. Fire Mater 36:575–589. https://doi.org/10.1002/fam.1117CrossRef

42.

European Union. Council Directive 89/106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products. http://data.europa.eu/eli/dir/1989/106/2003-11-20

43.

ASTM C423-17 (2017) Standard test method for sound absorption and sound absorption coefficients by the reverberation room method. ASTM International, West Conshohocken, PA

Title: Properties of Gypsum Mortars Dosed with LFS for Use in the Design of Prefabricated Blocks
Authors: Isabel Santamaría-Vicario
Álvaro Alonso-Díez
Mathieu Horgnies
Ángel Rodríguez-Saiz
Publisher: Springer Nature Singapore
Book: New Technologies in Building and Construction
Print ISBN: 978-981-19-1893-3

Electronic ISBN: 978-981-19-1894-0

Copyright Year: 2022
DOI: https://doi.org/10.1007/978-981-19-1894-0_15

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"