Top

Journal of Materials Science

Published in:

01-09-2013

Quantifying the surface roughness effect in microindentation using a proportional specimen resistance model

Authors: Hun Guan Chuah, Zaidi Mohd Ripin

Published in: Journal of Materials Science | Issue 18/2013

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The influence of the surface roughness on the indentation size effect in microindentation was examined using the proportional specimen resistance model. Stainless steel, aluminium, and copper surfaces were polished to different levels of roughness and subjected to microindentation. The results showed that the indentation size effect increases with increasing surface roughness, according to the proportional specimen resistance model. A normalized hardness equation H/H ₀ = (c ₀ + c ₁ R _a)/(a ₂ d) + 1 was established, and the value of c ₁ can be used to quantify the effect of surface roughness on the severity of the indentation size effect; this value was found to be highest for stainless steel, followed by copper and aluminium.

previous article Rapid synthesis of pure DD3R zeolite using ball-milled Sigma-1 seeds under static conditions

next article Facile plasma-induced fabrication of fluorescent carbon dots toward high-performance white LEDs

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Syed Asif SA, Wahl KJ, Colton RJ (1999) J Mater Res 15:546CrossRef

Fares C, Boukharouba T, Belouchrani MEA, Britah A, Abdelaziz MN (2009) Damage and fracture mechanics: Failure analysis of engineering materials and structures. Springer, Dordrecht, p 1

Petzow G (1999) Metallographic etching: techniques for metallography, ceramography, and plastography, 2nd edn. ASM, New York

Kim JY, Kang SK, Lee JJ, Jang JI, Lee YH, Kwon D (2007) Acta Mater 55:3555CrossRef

Ridriguez R, Gutierrez I (2003) Mater Sci Eng A 361:377CrossRef

Liu Y, Ngan AHW (2001) Scripta Mater 44:237CrossRef

Pathak S, Stojakovic D, Doherty R, Kalidindi SR (2009) J Mater Res 24:1142CrossRef

Tabor D (1951) The hardness of metals. England, Oxford

Iost A, Bigot R (1996) J Mater Sci 31:3573. doi:10.1007_BF00360764

10.

Pelletier H, Gauthier C, Schirrer R (2010) Wear 268:1157CrossRef

11.

Nix WD, Gao H (1998) J Mech Phys Solids 46:411CrossRef

12.

Fleck NA, Muller GM, Ashby MF, Hutchinson JW (1994) Acta Metall Mater 42(2):475CrossRef

13.

Syed A, Wahl KJ, Colton RJ (2000) J Mater Res 15:546CrossRef

14.

Marteau J, Mazeran PE, Bouvier S, Bigerelle M (2012) Strain 48:491CrossRef

15.

Bo Y, Horst V (2005) Mater Sci Eng A 25:467

16.

Petch NJ (1953) J Iron Steel Inst 174:25

17.

Lee YH, Kwon D (2003) Scripta Mater 49(5):459CrossRef

18.

Karpenko YA, Akay A (2001) Trib Intl 34:531CrossRef

19.

Xu ZH, Agren J (2004) Phil Mag 84:2367CrossRef

20.

Mata M, Alcalá J (2004) Mech Phys Solids 52:145CrossRef

21.

Li H, Ghost A, Han YH, Bradt RC (1993) J Mater Res 8(5):1028CrossRef

22.

Shi H, Atkinson M (1990) J Mater Sci 25:2111. doi:10.1007_BF01045774 CrossRef

23.

McElhaney KW, Vlassak JJ, Nix WD (1998) J Mat Res 13:1300CrossRef

24.

Pharr GM, Hertbert GE, Gao Y (2010) Rev Mater Res 40:271CrossRef

25.

Elmustafa AA, Stone DS (2003) J Mech Phys Solids 51:357CrossRef

26.

Meyer E (1908) Phys Z 9:66

27.

Mukhopadhyay NK, Paufler P (2006) Int Mater Rev 51:209CrossRef

28.

Hays C, Kendall EG (1973) Metallurgy 6:275

29.

Li H, Bradt R (1993) J Mater Sci 28:917. doi:10.1007_BF00400874 CrossRef

30.

Li H, Han YH, Bradt RC (1994) J Mater Sci 29:5641. doi:10.1007_BF00349959 CrossRef

31.

Li N, Liu L, Zhang M (2009) J Mater Sci 44:3072. doi:10.1007/s10853-009-3407-x CrossRef

32.

Sargent PM, Page TF (1978) Proc Br Ceram Soc 26:209

33.

Ford IJ (1993) J Phys: Apply Phys 26:2219CrossRef

34.

Begley MR, Hutchinson JW (1998) J Mech Phys Solids 46:2049CrossRef

35.

Chicot D, Roudet F, Soom A, Lesage (2007) J Surf Eng 23:32CrossRef

36.

Qian L, Li M, Zhou Z, Yang H, Shi X (2005) Surf Coat Technol 195:264CrossRef

37.

Zong Z, Lou J, Adewoye OO, Elmustafa AA, Hammad F, Soboyejo WO (2006) Mater Sci Eng A 434:178. doi:10.1016/j.msea.2006.06.137-&gt CrossRef

38.

Ramamurty U, Jana S, Kawamura Y, Chattopadhyay K (2005) Acta Mater 53:705. doi:10.1016/j.actamat.2004.10.023 CrossRef

39.

Sangwal K (2009) Cryst Res Technol 44:1019. doi:10.1002/crat.200900385 CrossRef

40.

Graca S, Colaco R, Vilar R (2007) Surf Coat Technol 202:538. doi:10.1016/j.surfcoat.2007.06.031 CrossRef

41.

Zhang H, Jing X, Subhash G, Laslo JK, Dowding RJ (2005) Acta Mater 53:3849. doi:10.1016/j.actamat.2005.04.036 CrossRef

42.

Bobji MS, Biswas SK (1998) J Mater Res 13:3227. doi:10.1557/JMR.1998.0438 CrossRef

43.

Guo WC, Rauchs G, Zhang WH, Ponthot JP (2010) J Comput Appl Math 234:2183CrossRef

44.

Sangwal K, Kłos A (2005) Cryst Res Technol 40:429CrossRef

45.

Bhushan B (2005) Nanotribology and nanomechanics: An introduction. Springer, Germany, p 776CrossRef

46.

Greenwood JA, Williamson JBP (1966) Proc R Soc A 295:300. doi:10.1098/rspa.1966.0242 CrossRef

47.

Nanda Kumar AK, Kannan MD, Jayakumar S, Rajam KS, Raju VS (2006) Surf Coat Tech 201:3253. doi:10.1016/j.surfcoat.2006.06.053 CrossRef

48.

Marteau J, Bigerelle, Xia Y, Mazeran PE, Bouvier (2013) Tribol Int 59:154CrossRef

49.

Bigerelle M, Giljean S, Mathia TG (2011) Tribol Int 44:63CrossRef

50.

Chudoba T, Jennett NM (2008) J Phys D 41:1CrossRef

51.

Wang Z (2012) Influence of sample preparation on the indentation size effect and nanoindentation pop-in on nickel (Doctoral dissertation) University of Tennessee

52.

Ma Z, Long S, Pan Y, Zhou Y (2008) J Appl Phys 103:043512-1

53.

Voyiadjis G, Peters R (2010) Acta Mech 211:131CrossRef

54.

Graca S, Colaco R, Vilar R (2007) Surf Coat Technol 202(3):538CrossRef

Title: Quantifying the surface roughness effect in microindentation using a proportional specimen resistance model
Authors: Hun Guan Chuah
Zaidi Mohd Ripin
Publication date: 01-09-2013
Publisher: Springer US
Published in: Journal of Materials Science / Issue 18/2013
Print ISSN: 0022-2461
Electronic ISSN: 1573-4803
DOI: https://doi.org/10.1007/s10853-013-7429-z

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 18/2013

Facile plasma-induced fabrication of fluorescent carbon dots toward high-performance white LEDs

Nitrogen doping of ZnTe for the preparation of ZnTe/ZnO light-emitting diode

Effect of porosity on the crack pattern and residual strength of ceramics after quenching

Strengthening and mechanical stability mechanisms in nanostructured bainite

Preparation of high thermal conductivity copper–diamond composites using molybdenum carbide-coated diamond particles

Cupping behaviour of surface densified Scots pine wood: the effect of process parameters and correlation with density profile characteristics

Premium Partners