Top

Metallurgist

Published in:

16-11-2023

Rationale for Choice of the Laser Marking Modes for Corrosion-Resistant Metals and Alloys

Authors: A. P. Petkova, O. Yu. Ganzulenko, S. M. Gorbatyuk, E. V. Larionova

Published in: Metallurgist | Issue 5-6/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The article is devoted to modeling the technological process of marking the surface of metal products using pulsed lasers. The described mathematical model makes it possible to select the optimal technological parameters of laser marking in order to form marking symbols with specified color characteristics on the surface of products made of non-ferrous metals and alloys with various chemical compositions, taking into account the physical properties of the material being marked. The developed technological regimes have been tested and recommended for marking serial products made of corrosion-resistant steels and non-ferrous metals and alloys for various industrial application. The use of four or eight colors in a color matrix code instead of only black and white in a two-dimensional code allows increasing the code capacity to two or three bits of information, depending on the number of color layers. Operating with 4 or 8 stable color shades, including the background color, it is possible to form two- and three-layer color matrix codes on the surface of each of the listed materials.

previous article Testing of the Technology of Hot Rolling of Transformer Steel Strips with Edge-Drop Compensation Using Hot-Rolling Mill (Model 2000) at “Novolipetsk Steel”

next article Development of Technology for Producing Complex Boron-Containing Aluminum-Silicon Ferroalloy

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Intern. Standard ISO/IEC 18004, Automatic Identification and Data Capture Techniques, 1^st ed., Information technology — Bar code symbology — QR Code (2000).

O. Carroll, Y. Tanguy, J. Houlihan, and G. Huyet, “Dynamics of a self-pulsing laser with delay,” Proc. of SPIE. The Intern. Society for Optical Eng., 77, 628–635 (2004).

A. Valiulin, S. Gorniy, Yu. Grechko, M. Patrov, K. Yudin, et al., “Laser material marking,” Photonics, No. 3, 16–22 (2007).

S. Gorny, V. Veiko, G. Odintsova, A. Loginov, Yu. Karlagina, et al., “Color laser marking of metals surfaces,” Fotonika, 42, 6, 34–45 (2013).

G. Odintsova, Y. Andreeva, A. Salminen, H. Roozbahani, L. Van Cuong, et al., “Investigation of production related impact on the optical properties of color laser marking,” J. of Materials Processing Technology, 274, 116263 (2019); https://doi.org/10.1016/j/jmatprotec.2019.116263.

E. I. Pryakhin and Ye. Yu. Troshina, “Study of technological and operational features of high-temperature resistant composite films for laser marking of parts made of ferrous alloys,” Chernye Metally, No. 4, 74–80 (2023); https://doi.org/10.17580/chm.2023.04.12.

E. I. Pryakhin, “Nano-barcode as a universal two-dimensional symbolism with new capabilities,” Zapiski Gornogo Instituta, 215, 97–100 (2015).

E. I. Pryakhin and Ye. A. Zakharenko, “Nano-barcode — a multifunctional system of product identification and protection,” Fotonika, 48, 6, 12–19 (2014).

I. G. Morozova, M. G. Naumova, A. Yu. Zarapin, and P. V. Borisov, “Creation of copper alloy marking by changing its surface topology under exposure to laser heat treatment,” Metallurg, No. 5, 56–60 (2018).

10.

O. S. Chirkova, D. A. Konchus, and A. V. Sivenkov, “Effect of laser marking on the surface properties of steel 08Kh18N10,” Metalloobrabotka, 106, 4, 21–27 (2018).

11.

A. V. Sivenkov, K. I. Konovalov, and Ye. I. Zverkova, “Effect of laser marking on the change in structure and properties of austenitic steel,” Intern. Sci. Rev., 11, 21, 38–40 (2016).

12.

E. I. Pryakhin and E. A. Zakharenko, “Creating and approbation of the hardware and software complex for information fields application on the surface of products,” J. of Mining Institute, No. 209, 234–238 (2014).

13.

E. I. Pryakhin, “Development of polygraphic program-controlled hardware system for applying high-density coding on surface of products made from varied materials,” IOP Conf. Series: Earth and Environmental Sci., No. 194, 042020 (2018).

14.

D. A. Konchus, A. V. Sivenkov, and E. I. Pryakhin, “Structural variations on the surface of metallic products at laser marking,” CIS Iron and Steel Rev., No. 2, 96–101 (2021).

15.

V. P. Veiko, S. G. Gorny, G. V. Odintsova, M. I. Patrov, and K. V. Yudin, “Formation of a multi-color image on the surface of metals during laser oxidation,” Izv. Vuzov, Priborostroyeniye, No. 54(2), 47–52 (2011).

16.

E. I. Pryakhin, E. A. Zakharenko, E. V. Larionova, A. P. Petkova, and O. Yu. Ganzulenko, Certificate of State Registration of Computer Program No. 2014610252: “Program for automatic nano-barcode image analysis,” Appl. No. 2013616508, Appl. Date: July 23, 2013; State registration date: January 09, 2014; Publ. date: February 20, 2014.

17.

O. Yu. Ganzulenko and A. P. Petkova, “Simulation and approbation of the marking laser process on metal materials,” J. of Physics: Conf. Series, 1753(1), 012016 (2021); https://doi.org/10.1088/1742-6596/1753/1/012016.CrossRef

18.

V. Veiko, Y. Y. Karlagina, M. Moskvin, V. Y. Mikhailovskii, G. Odintsova, et al., “Metal surface coloration by oxide periodic structures formed with nanosecond laser pulses,” Optics and Lasers in Eng., 96, 63–67 (2017).CrossRef

19.

E. I. Ageev, V. P. Veiko, E. A. Vlasova, Y. Y. Karlagina, A. S. Krivonosov, M. K. Moskvin, G. V. Odintsova, V. E. Pshenichnov, V. V. Romanov, and R. M. Yatsuk, “Controlled nanostructures formation on stainless steel by short laser pulses for products protection against falsification,” Optics Express, 26(2), 2117–2122 (2018).CrossRef

20.

N. G. Rasskazchikov and A. A. Polyakova, “Study of the laser marking process and its optimization,” Mashinostroyeniye: Set. Elektr. Nauch. Zhurn., 7, 1, 9–13 (2019); https://doi.org/10.24892/RIJIE/20190102.

21.

X. Ma, X. Nie, J. Zhao, P. Shrotriy, and Y. Zhang, “Effect of nanosecond pulsed laser parameters on the color marking of 304 stainless steel,” Optics and Laser Technology, 126, 106104 (2020); https://doi.org/10.1016/j.optlastec.2020.106104.

22.

E. I. Pryakhin, A. E. Ligachev, Y. R. Kolobov, E. A. Zakharenko, and V. V. Romanov, “Assessment of the thermal effect on the surface of metal structural materials on the stability of laser-induced codes readability,” Materials Sci. Forum, 1040, 47–54 (2021).CrossRef

23.

V. V. Tomaev, V. A. Polischuk, T. A. Vartanyan, S. V. Mjakin, N. B. Leonov, et al., “Studies of zinc and zinc oxide nanofilms of different thickness prepared by magnetron sputtering and thermal oxidation,” Optics and Spectroscopy, 129(9), 1033–1037 (2021); https://doi.org/10.1134/S0030400X21070201.CrossRef

24.

Chin-Lunchang, Chung-Wei Cheng, and Jinn-Kuen Chen, “Femtosecond laser-induced periodic surface structures of copper: Experimental and modeling comparison,” Applied Surface Sci., 469, 904–910 (2019); https://doi.org/10.1016/j.apsusc.2018.11.059.

25.

V. I. Alekseev, B. K. Barakhtin, and A. S. Zhukov, “Chemical heterogeneity as a factor in increasing the strength of steels made using selective laser melting technology” Zapiski Gornogo Instituta, No. 242, 191–196 (2020); https://doi.org/10.31897/pmi.2020.2.191.

26.

S. G. Gorny, E. A. Zakharenko, N. Klassen, Y. R. Kolobov, A. Ligachev, E. I. Pryakhin, et al., “Laser formation and influence of laser radiation on basic characteristics of barcodes,” Inorganic Materials: Applied Research, 13(3), 879–886 (2022).CrossRef

27.

J. V. Amiaga, A. R. Ramos-Velazquez, S. G. Gorny, S. A. Vologzhanina, and A. Michtchenko, “Groove formation on metal substrates by nanosecond laser removal of melted material,” Metals (MDPI), No. 11, 1–14 (2021); https://doi.org/10.3390/met11122026.

28.

J. V. Amiaga, S. G. Gorny, and S.A. Vologzhanina, “Method of convex marking of the surfaces of steel products using a pulsed 50-W infrared fiber laser,” Metally, No. 13, 1513–1517 (2020).

29.

J. V. Amiaga, S. G. Gorny, and S.A. Vologzhanina, “Laser oxide reduction during multi-pass relief forming on carbon steel surface,” Optical and Quantum Electronics, 55(6) (2023); https://doi.org/10.4028/www.scientific.net/MSF.1022.112.

30.

E. I. Pryakhin and E. Yu. Troshina, “Degradation after thermal and chemical exposure to matrix codes formed using lasers on brass and aluminum alloy products,” Tsvetnye Metally, No. 7, 87–91 (2022); https://doi.org/10.17580/tsm.2022.07.10.

31.

I. G. Morozova, M. G. Naumova, A. Y. Zarapin, and P. V. Borisov, “Copper alloy marking by altering its surface topology using laser heat treatment,” Metallurgist, 62, 464–469 (2018).CrossRef

32.

S. N. Stepanov, T. A. Larionova, and S. S. Stepanov, “Study of the effect of aluminum on the adhesion of stainless steel during gas-flame spraying,” Zapiski Gornogo Instituta, No. 245, 591–598 (2020); https://doi.org/10.31897/PMI.2020.5.11.

33.

Yu. Ol’t, V. V. Maksarov, and V. A. Krasny, “Study of wear resistance of bearing assemblies of engines of pit dump trucks operating under fretting conditions,” Zapiski Gornogo Instituta, No. 235, 70 (2019); https://doi.org/10.31897/pmi.2019.1.70.

34.

S. M. Gorbatuk, M. G. Naumova, and I. G. Morozova, “Color mark formation on a metal surface by a highly concentrated energy source,” Metallurgist, 60(5), 646–650 (2016); https://doi.org/10.4028/www.scientific.net/MSF.1022.112.CrossRef

35.

D. A. Konchus and A. V. Sivenkov, “The formation of contrasting nanofilms on a metal surface for bar coding,” Key Engineering Materials, 854, 97–102 (2020); https://doi.org/10.4028/www.scientific.net/KEM.854.97.

36.

A. P. Petkova and O. Yu. Ganzulenko, “Laser marking of non-ferrous metal and alloy products using ultra-dense barcodes: process features,” Tsvetnye Metally, No. 7, 92–97 (2022); https://doi.org/10.17580/tsm.2022.07.11.

Title: Rationale for Choice of the Laser Marking Modes for Corrosion-Resistant Metals and Alloys
Authors: A. P. Petkova
O. Yu. Ganzulenko
S. M. Gorbatyuk
E. V. Larionova
Publication date: 16-11-2023
Publisher: Springer US
Published in: Metallurgist / Issue 5-6/2023
Print ISSN: 0026-0894
Electronic ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-023-01565-6

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 5-6/2023

Aspects of Structure and Properties Formation in Steels During Laser-Acoustic Processing

Metallurgist Volume 67, Number 5

Experimental Mold for Producing Concast Billets from High-Alloyed Steels and Alloys. Part 2. Testing of an Experimental Mold using a Low-Temperature Melt

Testing of the Technology of Hot Rolling of Transformer Steel Strips with Edge-Drop Compensation Using Hot-Rolling Mill (Model 2000) at “Novolipetsk Steel”

Metallurgist Volume 67, Number 6

Effect of Local Combined Thermal Action on Value and Distribution of Residual Stresses in Steel 20 Plate

Premium Partners